ALM2403QPWPRQ1
Product Specifications
ALM2403QPWPRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The ALM2403QPWPRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ALM2403QPWPRQ1: dual low distortion amplifier with 500 mA peak output for resolver drive
ALM2403QPWPRQ1 is the excitation amplifier for a resolver primary coil, where distortion and drive current arrive together in a HTSSOP body of 14 pins. The part offers 21 MHz of gain bandwidth, a 50 V per microsecond slew rate and 500 mA peak per channel from a supply of up to 24 V, with current limit, overtemperature shutdown and a shutdown pin. It is qualified to AEC-Q100 grade 1 and is built to drive a resolver primary coil directly instead of a discrete amplifier and transistor pair.
Order code and package
| Order code | ALM2403QPWPRQ1 |
| Function | dual amplifier for resolver excitation |
| Output current | 500 mA peak per channel, 650 mA in an earlier revision of the document |
| Supply | 5 V to 24 V |
| Gain bandwidth | 21 MHz |
| Slew rate | 50 V per microsecond |
| Protection | current limit and overtemperature shutdown |
| Shutdown pin | for low quiescent current standby |
| Package | HTSSOP, 14 pins with thermal pad |
| Temperature grade | AEC-Q100 grade 1, minus 40 to plus 125 C |
| Datasheet | SBOSA37 revision A |
| Revision note | the output current in the feature list changed from 650 mA to 500 mA |
Electrical parameters that decide the application
| Output current | 500 mA peak, which is a transient figure rather than a continuous one |
| Dissipation | 24 V supply and a 2 V output at 500 mA is 11 W instantaneously, so the peak current is a short event |
| Bandwidth | 21 MHz at a gain chosen for the excitation loop, not at unity |
| Slew rate | 50 V per microsecond, which at 10 V peak to peak gives 796 kHz of full power bandwidth |
| Distortion | the reason the part exists: a resolver needs a clean sine, and a class AB output stage in a small body distorts near the rails |
| Thermal | 14-pin HTSSOP, 22.5 C per W junction to ambient on a board with copper |
| Supply headroom | the output stage needs the supply above the coil voltage plus the drop across the internal devices |
| Shutdown | the pin removes the quiescent current, and the part takes milliseconds to come back |
| Input range | 0.5 V inside the positive rail, 0.2 V inside it at the wider temperature band |
| Package | the same 14-pin body as the 16 V member, so the two share a footprint |
Points to check before this part goes on a BOM
The feature list in revision A says 500 mA peak, while the earlier revision said 650 mA. The document records the change itself, so a bill of materials that quotes 650 mA from an older print is quoting a number the vendor has withdrawn.
Fifty volts per microsecond at 10 V peak to peak is 796 kHz of full power bandwidth. A resolver excited at 10 kHz uses a small fraction of that, which is why the part can hold low distortion at the excitation frequency without the slew rate becoming the limit.
Resolvers are excited differentially, so two channels are used at opposite phase and the current in the coil is the difference. The peak current figure applies per channel, and the supply has to deliver both peaks at the same instant.
Dissipation at 24 V with a 2 V output and 500 mA is 11 W for the duration of the peak. The overtemperature shutdown is what protects the die, and it will trip on a sustained fault rather than on the excitation cycle, which is the behaviour a resolver loop wants.
Twenty-one megahertz of gain bandwidth lets the same stage act as the excitation filter, which is how the part removes an external filter stage. The filter is then inside the loop that drives the coil, so the coil inductance is part of the stability question.
The input range stops 0.5 V inside the positive rail at 25 C and 0.2 V inside it over the full band. An excitation amplifier biased at mid rail has room; one biased near the rail does not.
Where this order code fits
Boards that need 400 mA continuous rather than 500 mA peak start from the 16 V member of the same family, which shares the footprint. Boards comparing it with a neighbouring part start from our Amplifier Cross Reference page, and boards replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.
Questions buyers ask
Is this part a higher current version of the ALM2402? It shares the 14-pin body and the protection set, but the supply ceiling is 24 V instead of 16 V and the bandwidth is 21 MHz, so the two are not interchangeable without checking the feedback network.
Is 500 mA a continuous rating? No. It is a peak figure; continuous current is set by the thermal path and by the voltage dropped across the output stage.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the BOM Shortage Recovery page sets out the checks that keep a substitute from failing on the bench.