Lamp Reflectors and Ellipsoidal Condensers
Product Specifications
Product Overview
An arc lamp radiates in every direction, and only the part that lands on the condenser reaches the sample. What turns a 75 W lamp into a usable beam is the pair behind it: a rear reflector that sends the backward radiation forward, and an ellipsoid that wraps the lamp and images it onto the entrance slit. The numbers that decide the fit are the two focal distances, the F number and the clear aperture.
An ellipsoid has two conjugate foci. Light leaving the lamp at the first focus passes through the second focus after one reflection, so the same surface collects and images at the same time. Two ellipsoids facing each other can almost enclose the lamp and the target and transfer most of the emitted energy, which is why this shape is used in photomax style housings and in photolithography illuminators rather than a plain spherical mirror.
The condenser lens is the second half of the pair. A plano convex or aspheric element collimates the collected light into a 33 mm beam at a 1.5 inch series flange, and the material sets the wavelength span: UV grade fused silica from 200 to 2500 nm, Pyrex from 350 nm, germanium or zinc selenide when the work is in the infrared. Collection efficiency, not lens size, is what separates one condenser from another.
Key Specifications
| Parameter | Value | Notes |
|---|---|---|
| Reflector coating | Bright rhodium on electroformed nickel | Broadband 200 to 10,000 nm |
| Substrate thickness | 0.76 mm typical | Replicated from a precision master |
| Surface quality | 80-50 scratch-dig | Collection optics, not imaging |
| Ellipsoid F numbers | F/1.18 and F/1.4 at 127 mm diameter | Matched to the arc size |
| First focal distance | 21.1 to 33.8 mm | Lamp side focus |
| Second focal distance | 241 to 508 mm | Target side focus |
| Condenser output | 33 mm collimated beam | At the 1.5 inch series flange |
| Fused silica range | 200 to 2500 nm | UV grade, F/1 to F/1.5 |
| Pyrex asphere range | 350 to 2500 nm | F/0.85 molded asphere |
| IR condenser range | 2 to 14 um | Germanium F/1.1, zinc selenide F/1 |
Included Models and Order Codes
The table runs from the reflector that sits behind the lamp, through the ellipsoids that surround it, to the condensers that form the output beam. Focal distances are given for both foci because the lamp to reflector spacing and the slit distance are set separately, and a reflector quoted with only one number cannot be placed. Collection efficiency is the multiplier a condenser applies to the lamp output.
| Part Number | Type | Size or F number | Focal Data | Coating or Material | Use |
|---|---|---|---|---|---|
| ELLIP-1 | Ellipsoidal reflector | 127.0 mm dia, F/1.4 | F1 21.1 mm, F2 241 mm | Rhodium on nickel | Lamp side collection |
| ELLIP-2 | Ellipsoidal reflector | 127.0 mm dia, F/1.18 | F1 21.1 mm, F2 241 mm | Rhodium on nickel | Wide collection angle |
| 60005 | Rear reflector assembly | For lamps up to 100 W | Rear port of Q housing | MgF2 coated | Back radiation recovery |
| 60015 | Replacement reflector | Fits 60005 position | Rear port of Q housing | MgF2 coated | Replacement part |
| 60056 | Condenser assembly | F/1.5 | Single element, 33 mm beam | UV fused silica 200-2500 nm | Series Q housing |
| 60063 | Condenser assembly | F/0.85 | Molded asphere, 33 mm beam | Pyrex 350-2500 nm | Visible range work |
| 60064 | Condenser assembly | F/1 | Two element, 33 mm beam | UV fused silica 200-2500 nm | Maximum collection |
| 60069 | Condenser assembly | F/2.2 | Asphere, 33 mm beam | UV fused silica 200-2500 nm | Focused output |
| 60006 | Condenser assembly | F/1.5 | Plano convex, 33 mm beam | UV fused silica | Collimated output |
| 60007 | Condenser assembly | F/2.2 | Plano convex | UV fused silica | Imaging output |
| 60008 | Condenser assembly | F/0.85 | Molded asphere, 33 mm beam | Pyrex | Visible range work |
| 60009 | IR condenser | F/1.1 | Plano convex | Germanium | 2 to 14 um |
| 60076 | Condenser assembly | F/1 | Plano convex | UV fused silica | High throughput |
| 60077 | IR condenser | F/1 | Plano convex | Zinc selenide | 2 to 14 um |
| 67017 | Aspheric condenser | F/1 | Asphere | Q housing series | Collimated output |
| 67018 | Aspheric condenser | F/1 | Asphere | Q housing series | Focused output |
Key Features
Two focal distances stated – F1 and F2 are both given, so the lamp spacing and the slit distance can be set from one table
Rhodium over nickel – electroformed nickel holds the figure, and rhodium keeps reflectance from UV to the far IR
Collection, not imaging – an 80-50 surface is specified for light gathering rather than for a resolved image
Condensers by wavelength – fused silica to 2500 nm, Pyrex from 350 nm, germanium and zinc selenide for the IR
Rear reflector on the same page – the MgF2 reflector that recovers back radiation is listed with the condenser it pairs with
Flange compatible – 1.5 inch series output, so the condenser couples to a monochromator without an adapter
Applications
Reflector and condenser are chosen as a pair, because the collection angle of one sets the usable aperture of the other.
Arc lamp sources – ellipsoid around a Xe or Hg lamp, condenser at the output flange for a collimated beam
Deuterium and UV sources – fused silica condensers down to 200 nm, with a rear reflector sized for the lamp
IR and photometry benches – germanium or zinc selenide condensers where a glass lens would absorb the band
Lamp optics are supplied alongside SUPERB PCB and SUPERB PCBA work when a photometer build needs its source assembly and its driver board together.
Sourcing and Cross-Reference
A reflector is ordered against the lamp, not against the housing. The first focal distance has to match the arc position, and the second has to reach the slit or the sample plane, so a part quoted with a single focal length leaves the user guessing. Where the housing already exists, the condenser flange and the rear reflector port decide the rest.
Coating is the second decision. Rhodium holds up across 200 nm to 10 um and does not tarnish, which is why it is used on replicated nickel ellipsoids. Magnesium fluoride is used on the rear reflector because it recovers the backward radiation without adding a colour cast, and it is not specified for deuterium lamps, which is a detail worth checking before a source is rebuilt.
Condensers are quoted by F number and by the beam they produce. Two condensers can both be F/1 and still differ in throughput by a factor of two once the internal transmission of the glass is counted, so the material belongs in the same comparison as the F number. Up to four condensers can be fitted to a series Q housing, which allows two samples to be lit from one lamp.
Complete source assemblies are packed through SUPERB Assembly with the lamp, reflector and condenser in one crate.
Q: Can you supply a rear reflector and condenser pair that matches an existing lamp housing?
A: Yes. SUPERB Tech quotes reflector and condenser pairs against the housing model and states both focal distances on the quotation.
Why Choose SUPERB for Lamp Optics
- Both foci quoted: lamp spacing and slit distance can be set without a trial fit
- Coating matched to band: rhodium for broadband, MgF2 for back radiation, IR materials where glass absorbs
- Reflector and condenser together: the pair is quoted as a set, so collection angle and aperture agree
- Replacement parts named: the reflector that fits an existing port is listed by part number, not by description
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Xenon and Deuterium Lamps, Lamp Housings and Shutters, Lenses and Mirrors for Optical Benches, Monochromator Gratings, Optical Windows and Sapphire Discs, Optical Slits and Apertures.