Contact Us
  • Home
  • COMPONENTS
  • Fiber Bundles and Light Guides for Spectrometers

Fiber Bundles and Light Guides for Spectrometers

Bundles that match a spectrometer slit, not just a single fiber. Round to linear, bifurcated Y and fan out formats, 50 to 600 um cores. High OH, low OH and solarization resistant fibers, SMA 905 on both ends.
quote now

Product Specifications

Product Overview

A single fiber into a slit is a compromise. The slit is 20 um by 2 mm and the fiber end is a circle, so most of the light misses the entrance and lands on the inside of the monochromator. A bundle rearranges the same glass into a line at the instrument end and a circle at the sample end, and the coupling efficiency jumps before anything else in the chain changes.

Three numbers decide which bundle is right. The core size sets how much light enters and how much resolution is lost, the hydroxyl content sets the wavelength span, and the layout sets where the light lands. A 105 um solarization resistant fiber covers 180 to 1200 nm and suits UV work; a 200 um low OH fiber covers 400 to 2400 nm and is the usual choice for NIR methods; a 400 or 600 um bifurcated pair is what a reflectance or backscatter probe needs.

The light guide is the other half of this family. Where a bundle carries a signal into a detector, a light guide carries illumination out of a lamp housing to a bench, a microscope or a cure station. These are glass fiber bundles in a flexible metal hose with a machined ferrule at each end, sized by bundle diameter and length, and they are quoted by the pair of ends the illuminator and the fixture need.

Key Specifications

ParameterValueNotes
Fiber core options50, 105, 200, 400 and 600 umMultimode step index glass
Numerical aperture0.22 plus or minus 0.02A bundle keeps the NA of the single fiber
Solarization resistant range180 to 1200 nmBelow 300 nm the fiber ages with use
High OH range250 to 1200 nmUV to visible work
Low OH range400 to 2400 nmVisible to NIR work
Bundle layout7 fibers in a line at one end, round at the otherThe linear end matches the slit
Linear end size0.9 x 0.1 mm for 105 um, 1.6 x 0.2 mm for 200 umPer bundle, measured at the face
Round end effective core380 to 700 um depending on fiberPer bundle
ConnectorsSMA 905 at both endsFerrule keyed for the slit axis
Short term bend radius16 to 24 mmLong term roughly double
Jacket optionsStainless steel tubing, PVC monocoil, silicone monocoil, stainless BXTemperature and chemical resistance differ
Light guide bundle size0.375 in and 0.5 inFerrule 14.27 mm on the 0.5 in guide

Included Models and Order Codes

The first block is the round to linear family, which is the one to quote when a slit is involved. The second is the bifurcated Y family, used where one source feeds two paths or two detectors watch one sample. The last two rows are flexible light guides for illumination, quoted with the illuminator end and the fixture end named.

Part NumberTypeCore or BundleRangeLengthJacketUse
BFL105RS2Round to linear, 7 fibers105 um180 to 1200 nm2 mStainless tubingUV to NIR coupling
BFL105HS02Round to linear, 7 fibers105 um250 to 1200 nm2 mStainless tubingUV and visible
BFL105LS02Round to linear, 7 fibers105 um400 to 2400 nm2 mStainless tubingVisible to NIR
BFL200RS2Round to linear, 7 fibers200 um180 to 1200 nm2 mStainless tubingMore light at the slit
BFL200HS02Round to linear, 7 fibers200 um250 to 1200 nm2 mStainless tubingUV and visible
BFL200LS02Round to linear, 7 fibers200 um400 to 2400 nm2 mStainless tubingVisible to NIR
QBIF50-VIS-NIRBifurcated Y50 um400 to 2100 nm2 mSilicone monocoilReference leg
QBIF200-VIS-NIRBifurcated Y200 um400 to 2100 nm2 mSilicone monocoilTwo spectrometers
QBIF200-VIS-BXBifurcated Y200 um400 to 2100 nm2 mStainless BXField and plant use
QBIF400-VIS-NIRBifurcated Y400 um400 to 2100 nm2 mSilicone monocoilReflectance pairs
QBIF400-VIS-BXBifurcated Y400 um400 to 2100 nm2 mStainless BXProcess lines
QBIF600-VIS-NIRBifurcated Y600 um400 to 2100 nm2 mSilicone monocoilLow light levels
QBIF600-VIS-BXBifurcated Y600 um400 to 2100 nm2 mStainless BXHarsh sites
38-659Flexible light guide0.5 in bundleVisible12 inPVC over metal hoseIlluminator to bench
54-214Flexible light guide0.375 in bundleVisible48 inPVC over metal hoseRemote illumination

Key Features

Linear end matches the slit – 7 fibers stacked into a line, so the light enters the monochromator instead of hitting the wall beside the entrance

Fiber by wavelength – solarization resistant for 180 to 1200 nm, high OH for 250 to 1200 nm, low OH for 400 to 2400 nm

No dark fibers – the vendor screens each bundle, so a dead channel does not quietly cut the signal by a seventh

Bifurcated legs in matched pairs – common end fibers sit side by side at the same diameter, which keeps source and reference paths comparable

Jacket by environment – silicone monocoil for bench and laboratory, stainless BX for cable trays and washdown areas

Light guides by the pair of ends – ferrule size, bundle diameter and length quoted against the illuminator and the fixture, not on their own

Applications

These parts are chosen at the same time as the slit, the grating and the detector, so the application usually names all four.

UV to NIR absorbance – a 105 or 200 um round to linear bundle between a cuvette holder and the spectrometer entrance

Reflectance and backscatter – a bifurcated 400 or 600 um pair with one leg to the lamp and one to the detector

Illumination for microscopy and cure – flexible light guides from a xenon or LED housing to the fixture, sized by bundle diameter and length

Bundles and light guides ship alongside SUPERB PCB and SUPERB PCBA work when an analyser build moves from the board to the optical bench.

Sourcing and Cross-Reference

Bundles are ordered by geometry, not by part number alone. The same 200 um fiber is sold in a 7 fiber line, a 19 fiber line, a Y pair and a fan out, and the price and the coupling efficiency change with the layout. We quote the layout that matches the slit height first, then the fiber type, then the jacket.

Two failure modes are worth naming. A bundle used below 300 nm without the solarization resistant fiber goes brown over a few hundred hours and the throughput falls off first in the UV, which reads as a drifting lamp rather than a fiber problem. A keyed ferrule that is turned 90 degrees in the holder loses a large part of the signal, which is why the sleeve carries an alignment mark.

Length is usually fixed at 2 m for the standard assemblies because the fiber attenuation is small over that run and the handling is easier. Longer runs are possible, but step index multimode fiber loses light at the bends more than in a straight line, so a 5 m run should be quoted with the bend radius in mind. Both points are settled at quotation, before the cable is made.

Optical kits for a new instrument are packed through SUPERB Assembly, so each bundle arrives with its ferrule caps and label in one bag.

Q: Can you supply a bundle with a linear end that matches our 50 um slit and a round end for a standard SMA probe?

A: Yes. SUPERB Tech quotes bundles against the slit height and the fiber range, and states the linear end dimensions before the order is placed.

Why Choose SUPERB for Fiber Bundles and Light Guides

  1. Slit first, fiber second: the layout is chosen against the entrance slit, then the fiber type and jacket follow
  2. Three fiber ranges on one page: UV, visible and NIR options with the wavelength span stated per part
  3. Y pairs quoted together: common end diameter and both leg lengths stated, so source and reference paths match
  4. Light guides with both ends named: ferrule, bundle diameter and length fixed against the illuminator and the fixture

Related Product Families

This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Fiber Collimators and Patch Cords, Photodiode Arrays and Detector Modules, Optical Slits and Apertures, Dichroic Filters and Beam Splitters, Quartz Flow Cells and Cuvettes, Monochromator Gratings and Bench Parts.