STM32U575VGT6
Product Specifications
STM32U575VGT6 — ARM Cortex-M33 Microcontroller by STMicroelectronics
The STM32U575VGT6 is an STMicroelectronics ARM Cortex-M33 MCU in LQFP-100(14x14) for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32U575VGT6 | Full Part Number | STMicroelectronics ARM Cortex-M33 Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| U5 | Series | ARM Cortex-M33 based MCU — U5 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32U575VGT6 |
| Core | ARM Cortex-M33 |
| Package | LQFP-100(14x14) |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32U575VGT6 is an STMicroelectronics ARM Cortex-M33 microcontroller in LQFP-100(14x14) package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M33 Core — Efficient Processing for Embedded Control
The ARM Cortex-M33 core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32U575VGT6 supported by STM32CubeIDE?
Yes, the STM32U575VGT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32U575VGT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32U575VGT6: 160 MHz Cortex-M33 with TrustZone and 1 Mbyte of flash
The U5 line is the low power counterpart of the H5, built on the same Cortex-M33 core but tuned for current rather than clock. The order code reads: U5 ultra-low-power line, 575 subfamily, V is 100 pins, G is 1 Mbyte of flash, T is the LQFP body at 14 mm by 14 mm, 6 is the industrial range. The same die is offered with 2 Mbytes of flash under a different density letter.
The core runs to 160 MHz with 240 DMIPS, 651 CoreMark and an 8 Kbyte instruction cache. ST quotes 450 ULPMark CP, 109 ULPMark PP and 51.5 ULPMark CM, which puts the part at 19.5 microamps per MHz in run mode at 3.3 V and 1.9 microamps in Stop 3 with 16 Kbytes of SRAM retained. The supply window is 1.71 V to 3.6 V. The figures below come from ST's product page for the U575 line and its current data sheet.
The order code, character by character
| Product family | STM32, 32-bit Arm microcontroller |
| Product line | U5, ultra-low-power Cortex-M33 with TrustZone |
| Subfamily | 575, full feature with two Octo-SPI interfaces |
| Pin count | V, 100 pins |
| Flash density | G, 1 Mbyte with ECC in two banks |
| Package | T, LQFP 14 mm by 14 mm, 1.4 mm body |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Core clock | 160 MHz, 240 DMIPS, 651 CoreMark |
| SRAM | 786 Kbytes with ECC off, 722 Kbytes with ECC on |
| Supply | 1.71 V to 3.6 V |
| Run current | 19.5 uA per MHz at 3.3 V |
| Stop current | 1.9 uA in Stop 3 with 16 Kbyte retained, 4.3 uA with full SRAM |
| Standby and shutdown | 210 nA standby, 160 nA shutdown with 24 wake up pins |
| Memory interfaces | Two Octo-SPI, external memory interface for SRAM, PSRAM, NOR, NAND and FRAM |
| Grade | Industrial, ECOPACK2 |
What low power background mode changes
Most low power products spend their life waking up, taking one reading and going back to sleep, and the wake up itself is the cost. The background autonomous mode on this part lets the peripherals and the DMA run while the core stays in Stop 2, so an ADC sweep and a transfer into SRAM happen without a wake up at all. The core comes back when the data is ready rather than when the timer fires.
The two Octo-SPI interfaces are the other unusual feature on a low power part. A product that needs a large font set, a configuration image or a log can put it in an external serial flash and execute from it, which keeps the internal 1 Mbyte for the code that has to be fast. That combination is why this part turns up in portable instruments with a display.
Questions that arrive with a shortage quote
Does ECC cost SRAM? Yes. The full array is 786 Kbytes with ECC off and 722 Kbytes with ECC on, because the check bits occupy memory. A product that needs the whole array should decide early whether ECC is required.
Is the 160 MHz core slower than the H5 in real work? On pure clock yes, but the instruction cache and the core are the same generation, so the difference in a real loop is smaller than the ratio suggests. The current consumption is where the U5 wins clearly.
Can the part be programmed in circuit with the core in Stop? The debug port wakes the part for programming. The supply sequencing for that is in the data sheet and should be checked against the programmer being used.
What to send with an enquiry
Send the quantity, target date, the complete order code and whether the product needs the 2 Mbyte density, because that is a different letter and usually a different lead time. We check the code against the current revision on our MCU cross reference page and confirm date codes and packaging on the quotation. The memory cross reference page covers the serial flash that a product of this shape usually adds, and the date code management page explains how mixed lots are kept apart.