STM32L496RGT6
Product Specifications
STM32L496RGT6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32L496RGT6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-64_10x10x05P for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L496RGT6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L4 | Series | ARM Cortex-M4F based MCU — L4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L496RGT6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-64_10x10x05P |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L496RGT6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-64_10x10x05P package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L496RGT6 supported by STM32CubeIDE?
Yes, the STM32L496RGT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L496RGT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L496RGT6: 80 MHz with 1 Mbyte of flash, 320 Kbytes of RAM and a segment LCD driver in 64 pins
The string reads in six places and each one changes what arrives on the reel. STM32 is the 32-bit Arm family, L4 is the ultra-low-power line built on a Cortex-M4 with a single precision floating point unit, 96 is the subfamily that carries USB on-the-go and the segment LCD driver, R is the 64 pin body, G is 1 Mbyte of flash, T is the low profile quad flat package at 10 mm by 10 mm, and 6 is the industrial range of minus 40 to plus 85 degrees C. The same die is sold in 100, 132, 144 and 169 pin bodies, so an enquiry that quotes only the family is not yet a part number.
Inside, the core runs to 80 MHz with 1.25 DMIPS per MHz against Dhrystone 2.1, which the datasheet states as 100 DMIPS and 273.55 CoreMark at that clock. The memory map holds 320 Kbytes of SRAM and 1 Mbyte of flash. The figures below are read from DS11585 Rev 20, which is the current revision for this family and which also covers the variants with an external SMPS option.
The order code, character by character
| Product family | STM32, 32-bit Arm microcontroller |
| Product line | L4, ultra-low-power Cortex-M4 with FPU |
| Subfamily | 96, USB on-the-go plus the segment LCD driver |
| Pin count | R, 64 pins |
| Flash density | G, 1 Mbyte |
| Package | T, LQFP 10 mm by 10 mm, 0.5 mm pitch |
| Temperature | 6, minus 40 to plus 85 degrees C ambient |
| Core clock | 80 MHz, 100 DMIPS, 273.55 CoreMark |
| SRAM | 320 Kbytes |
| Supply | 1.71 V to 3.6 V on VDD |
| Core supply option | VDD12 from 1.05 V to 1.32 V when an external SMPS feeds the core |
| Display | LCD driver, 8 by 40 or 4 by 44 segments, internal step-up converter |
| Serial | USB OTG full speed, two CAN, four I2C at 1 Mbit per second, three SPI plus quad SPI |
| Accelerators | Chrom-ART for graphics, HASH for message digests |
Why the LCD driver and the 1 Mbyte array sit on the same die
A segment display that runs straight from the microcontroller removes the driver chip, its own supply rail and the level shifting between them. The internal step-up converter lets the LCD voltage sit above VDD, so a three cell stack can keep contrast as the cells discharge instead of fading through the last part of the curve. On a heat meter or a gas meter that is read once a quarter, that is the difference between a display that is legible at end of life and one that is not.
The 1 Mbyte array is what makes the same board carry a graphical interface, a protocol stack and a data log at once. Two CAN channels at 2.0B cover a meter bus and a service port without an external controller, and the quad SPI interface is the escape hatch when the log outgrows the internal array: a serial NOR device adds capacity without changing the 64 pin land pattern, which is covered on our memory cross reference page.
Questions that arrive with a shortage quote
Does the plain order code work below 1.8 V? No. The L496 family is specified from 1.71 V and the brownout reset is active by default; a board that needs 1.65 V is a different subfamily, not a different suffix.
Is the 6 suffix the only temperature grade? The family table also lists a 125 degree ambient grade. A quote that shows 6 is the 85 degree part, and a board that runs its case at 90 degrees needs the wider grade rather than a heatsink argument.
Can the HASH unit be used for secure boot? It accelerates MD5, SHA-1 and SHA-256 digests, which is the hash half of a signature check. The signature arithmetic itself runs on the core.
What to send with an enquiry
The quantity, the target date, the temperature suffix and whether the board uses the external SMPS option are the four fields that decide the price. The SMPS option changes the pin out on the supply pins, so it cannot be swapped after the board is built. Send the full string and we check it against the current revision on our MCU cross reference page, then confirm the date code and packaging on the quotation. Reels, trays and cut tape are all available, and the date code management page explains how we keep mixed date codes out of one production lot.