STM32L433VCT6
Product Specifications
STM32L433VCT6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32L433VCT6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-100 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L433VCT6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L4 | Series | ARM Cortex-M4F based MCU — L4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L433VCT6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-100 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L433VCT6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-100 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L433VCT6 supported by STM32CubeIDE?
Yes, the STM32L433VCT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L433VCT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L433VCT6: the same 256 Kbyte L4 die in a 100 pin body, and where the extra 36 pins go
V is 100 pins in the STM32 code, C is 256 Kbytes of flash, T is the low profile quad flat package at 14 mm by 14 mm, and 6 is minus 40 to plus 85 degrees C. This is the same silicon as the 64 pin member of the family, so the peripheral list, the current figures and the firmware image carry over. What changes is the number of lines that reach a pin, and on a board that drives a display, a keypad and three serial buses at once, that is the whole argument for the larger body.
Inside there is a Cortex-M4 with floating point at up to 80 MHz, 256 Kbytes of flash, 64 Kbytes of SRAM with parity on 16 of them, a segment LCD driver, USB full speed without a crystal, CAN and a quad SPI port. ST quotes 100 DMIPS and a 347 ULPMark CP score. The figures are read from DS11449 Rev 8, which covers every package in the family.
Order code and what the pin count buys
| Family | STM32, 32-bit Arm |
| Line | L4, ultra-low-power Cortex-M4 with FPU |
| Pin count | V, 100 pins |
| Flash | C, 256 Kbytes |
| SRAM | 64 Kbytes, 16 with hardware parity |
| Package | T, LQFP 14 mm by 14 mm |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Supply | 1.71 V to 3.6 V |
| I/O | Up to 83 fast lines, most 5 V tolerant |
| Display | LCD driver, 8 by 40 or 4 by 44 segments, step-up converter |
| Serial | USB full speed, CAN, three I2C at 1 Mbit per second, four USART, three SPI plus quad SPI |
| Analog | 12 bit ADC at 5 Msamples per second, up to 16 bit by oversampling, two DAC channels, one amplifier with gain, two comparators |
| Timers | Eleven, including one advanced motor control and two that run in stop mode |
Line budget on 100 pins
A segment LCD of 4 by 44 takes 48 lines if every segment is driven directly, which is more than half the package. Most products multiplex the display and use a smaller glass, and the pin count is then set by the other functions: two serial ports, a keypad matrix of four by four, an analog front end of six channels, a programming header and the crystal. On the 64 pin body that budget does not close, and the usual answer is an external expander, which brings its own address, its interrupt line and its cost.
The 100 pin body also puts more analog channels on pins. The converter itself is the same, but a board that needs twelve inputs cannot reach them on the smaller package even though the silicon has them.
Power and thermal behaviour of the larger body
The current figures do not change with the package, but the thermal resistance does: a 14 mm body spreads heat better than a 10 mm one, and at 80 MHz with the display and the serial ports running, that difference shows up in the junction temperature. The five low power states are the same, from 8 nanoamps in shutdown through 28 nanoamps in standby to 1.0 microamp in stop 2 with a 4 microsecond wakeup. A product that must keep the RTC and the backup registers alive pays 200 nanoamps in the backup domain, and that is the number that sets a coin cell life.
Before you commit a 100 pin board
Confirm the density letter, because the 128 Kbyte part shares the body; confirm the temperature grade, because 105 and 125 degree versions exist; and confirm the packing. We check the string against the current revision and hold one date code per build. The pin to pin cross reference page lists the bodies where a substitution holds, the kitting service page covers staging, and the MCU cross reference page compares this family with the 64 pin member.