STM32L433RCT6
Product Specifications
STM32L433RCT6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32L433RCT6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-64 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L433RCT6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L4 | Series | ARM Cortex-M4F based MCU — L4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L433RCT6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-64 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L433RCT6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-64 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L433RCT6 supported by STM32CubeIDE?
Yes, the STM32L433RCT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L433RCT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L433RCT6: 256 Kbytes of flash, a segment LCD driver and 8 nanoamps in shutdown at 64 pins
The L433 sits one step above the entry of the L4 line and it is the first member that carries the segment LCD driver together with a full serial set. R is 64 pins, C is the 256 Kbyte density, T is the low profile quad flat package at 10 mm by 10 mm, and 6 is minus 40 to plus 85 degrees C. The family also ships at 105 and 125 degree ambient, so the last digit is a decision and not a detail.
The core is a Cortex-M4 with a single precision floating point unit at up to 80 MHz, with the adaptive real time accelerator giving zero wait state execution from flash. ST quotes 100 DMIPS, 273.55 CoreMark and a 347 ULPMark CP score. The memory is 256 Kbytes of single bank flash and 64 Kbytes of SRAM, of which 16 Kbytes carry hardware parity. The figures are read from DS11449 Rev 8.
Order code and the power ladder
| Family | STM32, 32-bit Arm |
| Line | L4, ultra-low-power Cortex-M4 with FPU |
| Subfamily | 33, LCD driver plus USB and CAN |
| Pin count | R, 64 pins |
| Flash | C, 256 Kbytes, single bank |
| SRAM | 64 Kbytes, 16 Kbytes with parity |
| Package | T, LQFP 10 mm by 10 mm |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Supply | 1.71 V to 3.6 V |
| Run current | 84 microamps per MHz in LDO mode, 36 with the external SMPS at 3.3 V |
| Stop 2 | 1.0 microamp, 1.28 with RTC, 4 microsecond wakeup |
| Standby | 28 nanoamps, 280 with RTC running |
| Shutdown | 8 nanoamps with five wakeup pins |
| Backup domain | 200 nanoamps in VBAT mode with the RTC and 32 backup registers |
The five rungs of the ladder are not marketing
A battery product spends most of its life in one of four states, and the difference between them is measured in nanoamps. At 8 nanoamps in shutdown, a 220 milliampere hour coin cell would last three thousand years on paper, so the cell life is decided by the fraction of time the part spends awake. Moving one state up the ladder to standby with the RTC running multiplies the floor current by thirty five. That is why the wake strategy, not the sleep current, is the real question.
The 4 microsecond wakeup from stop is the number that makes a duty cycled sensor practical. A part that needs a millisecond to wake has to stay awake longer than the measurement takes, and the average current is set by the wake overhead rather than by the converter.
Where the LCD driver earns its place
An 8 by 40 segment driver with an internal step-up converter removes the external display chip and its bias network. On a utility meter or a thermostat, that is a part, a rail and a set of resistors that no longer need space or calibration. The driver works while the core sleeps, so the display keeps its content through stop mode without a refresh from software.
The 64 Kbyte body is the smallest that carries LCD, USB and CAN together. At 64 pins the usable line count is tight for a product that also wants a keypad, so most boards in this size class use a serial expander or a matrix keypad rather than one line per key.
Questions from a battery powered programme
Does the USB block need a crystal? The full speed interface has a crystal less option with clock recovery, which is one of the reasons this part appears on products that are sealed and cannot carry a tuning step.
Is the parity checked SRAM a separate array? It is 16 Kbytes inside the same 64 Kbyte map with hardware parity, used for the buffers where a single bit flip must be caught rather than corrected.
Can the 6 suffix run at 105 degrees? No. The family lists 85, 105 and 125 degree grades as separate order codes.
We confirm the temperature suffix, the packing and the date code before quoting, and we hold one lot for a build so that a mixed reel cannot put two revisions on one board. The MCU cross reference page compares the L4 branches, the date code management page explains the lot rule, and the power management cross reference page lists the rails and chargers that pair with a part drawing nanoamps in standby.