STM32L412CBU6
Product Specifications
STM32L412CBU6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32L412CBU6 is an STMicroelectronics ARM Cortex-M4F MCU in QFN-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L412CBU6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L4 | Series | ARM Cortex-M4F based MCU — L4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L412CBU6 |
| Core | ARM Cortex-M4F |
| Package | QFN-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L412CBU6 is an STMicroelectronics ARM Cortex-M4F microcontroller in QFN-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L412CBU6 supported by STM32CubeIDE?
Yes, the STM32L412CBU6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L412CBU6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L412CBU6: 442 ULPMark points in a 48 pin quad flat no-lead body
The L412 is the small member of the L4 line that keeps the floating point core and drops the display driver, the CAN controller and the USB host. C is 48 pins, B is the 128 Kbyte density, U is the UFQFPN48 body at 7 mm by 7 mm, and 6 is minus 40 to plus 85 degrees C. It is the part that appears when a product needs a real digital filter and a battery that lasts years rather than months.
The core is a Cortex-M4 with floating point at up to 80 MHz, quoted at 100 DMIPS and 273.55 CoreMark, with a 442 ULPMark CP score that is the highest in this family. Memory is 128 Kbytes of single bank flash and 40 Kbytes of SRAM, split 32 Kbytes at one address and 8 Kbytes with hardware parity at another. There are two 12 bit converters at 5 megasamples per second, one operational amplifier with programmable gain, one comparator and a quad SPI port with execute in place. The figures are read from DS12469 Rev 9.
Order code and the power figures
| Family | STM32, 32-bit Arm |
| Line | L4, ultra-low-power Cortex-M4 with FPU |
| Subfamily | 12, compact analog and USB without the display driver |
| Pin count | C, 48 pins |
| Flash | B, 128 Kbytes |
| SRAM | 40 Kbytes, 8 with hardware parity |
| Package | U, UFQFPN48 at 7 mm by 7 mm |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Supply | 1.71 V to 3.6 V |
| Run current | 79 microamps per MHz in LDO mode, 28 with the external SMPS at 3.3 V |
| Stop 2 | 0.7 microamp, 0.95 with RTC, 4 microsecond wakeup |
| Standby | 32 nanoamps, 245 with RTC |
| Shutdown | 16 nanoamps with four wakeup pins |
| Converters | Two 12 bit ADCs at 5 Msamples per second, 16 bit by oversampling |
What 442 ULPMark buys
The score is measured over a defined duty cycle rather than at a single operating point, so it reflects the part that wakes, measures, computes and sleeps. A product that samples a strain gauge once a second and transmits once an hour spends almost all its time in stop 2, and at 0.7 microamps the arithmetic of cell life becomes about the cell's self discharge rather than about the microcontroller. The 28 microamps per MHz figure with the external converter is the other end: an application that has to run continuously for a minute pays that rate, and the difference against 79 is what pays for the inductor.
The 16 nanoamp shutdown state with four wakeup pins is where a product sits for a year in a warehouse. That is the number that decides whether a shipped device arrives with a usable cell.
Analog on 48 pins
Two converters and a programmable gain amplifier in front of them is enough for a bridge, a thermocouple with an external cold junction, or a two channel current monitor. The converters share their supply with the analog reference pin, so a quiet rail is part of the measurement. Above 12 bits of effective resolution the reference and the return path matter more than the converter, and a board that puts a switching regulator next to the analog pins will not reach the oversampled 16 bit result.
The quad SPI port with execute in place lets a larger test sequence or a calibration table live in an external serial device while the internal 128 Kbytes holds the program. That is the escape route when the application outgrows the array without moving to a larger body.
What to include in an enquiry
The density, the temperature grade, the packing and whether the board uses the internal SMPS option, which changes the supply pin arrangement. We confirm the string against the current revision and hold one date code per build. The power management cross reference page lists the regulators and chargers that suit a part drawing 32 nanoamps in standby, the ADC and DAC cross reference page covers the signal chain, and the date code management page explains the lot rule.