STM32L010F4P6
Product Specifications
STM32L010F4P6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32L010F4P6 is an STMicroelectronics ARM Cortex-M4F MCU in TSSOP-20 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L010F4P6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L0 | Series | ARM Cortex-M4F based MCU — L0 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L010F4P6 |
| Core | ARM Cortex-M4F |
| Package | TSSOP-20 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L010F4P6 is an STMicroelectronics ARM Cortex-M4F microcontroller in TSSOP-20 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L010F4P6 supported by STM32CubeIDE?
Yes, the STM32L010F4P6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L010F4P6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L010F4P6: 16 Kbytes of flash, 2 Kbytes of RAM and 26 lines in a 20 pin body
The L010 is the value line of the L0 family, and this is its smallest member. F is 20 pins, 4 is the 16 Kbyte density, P is the TSSOP20 package at 169 mils, and 6 is minus 40 to plus 85 degrees C. The supply range starts at 1.8 V rather than the 1.65 V of the rest of the line, which is the number that decides whether this part can run from two alkaline cells near the end of their life.
The core is a Cortex-M0+ at up to 32 MHz with 0.95 DMIPS per MHz. Memory is 16 Kbytes of flash, 2 Kbytes of SRAM and 128 bytes of data EEPROM. Standby is 0.23 microamps with two wakeup pins, stop is 0.29 microamps with sixteen wakeup lines, run current is 76 microamps per MHz, and the wakeup from flash takes 5 microseconds. The 12 bit converter samples at 1.14 Msamples per second across up to ten channels. The figures are read from DS12323 Rev 3.
Order code and what 20 pins can do
| Family | STM32, 32-bit Arm |
| Line | L0, ultra-low-power Cortex-M0+ |
| Density | 4, 16 Kbytes of flash |
| Package | P, TSSOP20 at 169 mils |
| Temperature | 6, minus 40 to plus 85 degrees C |
| SRAM | 2 Kbytes |
| Data EEPROM | 128 bytes |
| Supply | 1.8 V to 3.6 V |
| Core clock | 32 MHz maximum |
| I/O | 26 lines on the package, 23 of them 5 V tolerant |
| Converter | 12 bit ADC at 1.14 Msamples per second, up to ten channels |
| Serial | One USART, one low power UART, one SPI at 16 megabits per second, one I2C |
| Timers | Seven, including one that runs in stop mode |
| Low power | 0.23 microamps in standby, 0.29 in stop, 5 microsecond wakeup |
128 bytes of EEPROM is not a joke
It is exactly enough for a serial number, a calibration offset, a cycle count and a fault code. Those four items are what most small controllers need to keep across a power cycle, and they are the reason a part with a real EEPROM is chosen over one that emulates it in flash. A flash page is 1 Kbyte and erases in blocks, so a counter updated every minute wears it out in weeks rather than years.
The 2 Kbytes of RAM is the harder limit. A state machine, a lookup table and a small buffer fit; a protocol stack with retries, a rolling log or a display buffer does not. A product that needs any of those should look at the 8 Kbyte member of the same family, which is the same core and the same peripherals.
Where a 20 pin part still wins
A relay timer, a battery monitor, a fan controller or a socket with a status light does not need more than this. The TSSOP20 body is easy to inspect, easy to rework and available on a two layer board, and the 5 V tolerant lines remove the level shifting that a 3.3 V only part would need in front of an industrial input. The part is also the one that keeps a legacy board alive when the original controller goes obsolete.
The 1.8 V floor is the constraint to check. Two alkaline cells at end of life are 2.0 V, which is inside the range; a single lithium cell at 2.9 V is inside as well; a 1.5 V coin cell through a boost is a different question and belongs to a part rated at 1.65 V.
What to send with the order
The density, the packing and the quantity. We confirm the string and the date code, and for a part this small we check the reel count because a shortage of 500 pieces is a line stop. The MCU cross reference page lists the L0 members, the obsolete part cross reference hub page covers the legacy parts this one replaces, and the kitting service page explains how small parts are counted and staged.