STM32H753IIK6
Product Specifications
STM32H753IIK6 — ARM Cortex-M7 Microcontroller by STMicroelectronics
The STM32H753IIK6 is an STMicroelectronics ARM Cortex-M7 MCU in UFBGA-201(10x10) for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32H753IIK6 | Full Part Number | STMicroelectronics ARM Cortex-M7 Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| H7 | Series | ARM Cortex-M7 based MCU — H7 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32H753IIK6 |
| Core | ARM Cortex-M7 |
| Package | UFBGA-201(10x10) |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32H753IIK6 is an STMicroelectronics ARM Cortex-M7 microcontroller in UFBGA-201(10x10) package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M7 Core — Efficient Processing for Embedded Control
The ARM Cortex-M7 core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32H753IIK6 supported by STM32CubeIDE?
Yes, the STM32H753IIK6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32H753IIK6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32H753IIK6: the 176 pin UFBGA at 0.5 mm pitch
The second I is the 176 pin count and the K is the UFBGA body at 0.5 mm ball pitch, 10 mm by 10 mm with the 25 ball perimeter that the family uses for power and ground. It carries the same die as the 176 pin leaded part in less than a fifth of the board area, which is why it appears on modules where the envelope is fixed before the board outline is fixed.
Inside is the Cortex-M7 at 480 MHz, 2 Mbytes of flash with read-while-write, 1 Mbyte of RAM with 192 Kbytes split between ITCM and DTCM, and the cryptographic accelerator. Figures are from DS12117 Rev 10.
The compact 176 pin option
| Package | UFBGA176 plus 25, 10 mm by 10 mm, 0.5 mm ball pitch |
| Core | Cortex-M7 at 480 MHz, 1027 DMIPS, double precision FPU |
| Memory | 2 Mbytes flash, 1 Mbyte RAM with 192 Kbytes TCM |
| Security | Cryptographic accelerator, ROP and PC-ROP, tamper detection |
| External memory | 32-bit controller with SDRAM, Quad SPI at 133 MHz |
| Board area | About a fifth of the 24 mm leaded body, before fan out |
| Escape routing | Via in pad or dog bone, four to six layers typical |
| Supply | 1.62 V to 3.6 V, embedded regulator |
| I/O | Same port count as the 176 pin leaded part |
| Inspection | X-ray for inner rows, boundary scan or functional test |
| Packing | Tray, tape and reel not offered on every body |
| Temperature | Minus 40 to plus 85 degrees C |
What 0.5 mm ball pitch demands
A 176 ball array at 0.5 mm needs a via per ball in most fan outs, and at that pitch the via either sits inside the pad or the ball is escaped with a short dog bone and a trace between pads. Both routes exist at most board houses, and both need the pad and mask definitions agreed before the stack is ordered. A board that assumes 0.8 mm rules at 0.5 mm pitch will not route.
The electrical side is better than the leaded part. The 25 perimeter balls carry power and ground, the return path to the plane is short, and the impedance at 480 MHz is lower than a leaded body can offer. That is the reason modules with tight emissions limits and no room for a big decoupling network end up on this package.
Process, inspection and rework
A 10 mm body at 0.5 mm pitch warps less than a 24 mm leaded part, so the reflow window is wider than the size suggests. What it does need is a flat board, a stencil with the right aperture ratio and a placed part that does not shift during reflow. Voiding on the power balls is the check that matters, and it is read on an X-ray of the first article.
Rework of a single ball is not practical, and a failed joint means lifting the device and reballing the site. That is a factory capability, not a bench operation, and it belongs in the sourcing decision. Our tooling and stencil control page covers the aperture and via rules we use for 0.5 mm arrays, and the supplier quality audit page covers the lot checks that keep a mixed date code out of a build.
Questions from a module project
Is this the same die as the leaded 176 pin part? Yes, and the port count matches, so the firmware does not change. Is the packing a reel? Not on this body, the delivery is a tray, and a line that expects a reel has to be told before the kit is staged.
Can the part run from a single 3.3 V rail? It can, with the embedded regulator supplying the core, provided the ramp and the decoupling follow the vendor requirements. A second rail is needed only where the analog section demands its own supply. Our MCU cross reference page records the package and memory steps across this family so a board that grows into a bigger array does not have to change its body.