STM32G431CBU6
Product Specifications
STM32G431CBU6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32G431CBU6 is an STMicroelectronics ARM Cortex-M4F MCU in UFQFPN-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G431CBU6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G4 | Series | ARM Cortex-M4F based MCU — G4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G431CBU6 |
| Core | ARM Cortex-M4F |
| Package | UFQFPN-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G431CBU6 is an STMicroelectronics ARM Cortex-M4F microcontroller in UFQFPN-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G431CBU6 supported by STM32CubeIDE?
Yes, the STM32G431CBU6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G431CBU6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G431CBU6: the QFN body of the same 48 pin part
STM32G431CBU6 is the UFQFPN48 version of the 128 Kbyte G431 member: 7 mm by 7 mm with a 0.5 mm pitch and an exposed pad, the same die and the same pinout as the leaded body, in a package that sits lower and spreads heat better. The U in the code is the body, not a different part.
Choosing between the two is an assembly and service decision, not an electrical one. The QFN is smaller in outline height, has a shorter thermal path through the pad, and cannot be inspected optically from above. The leaded part can be reworked by hand and inspected joint by joint. Both run a Cortex-M4F at 170 MHz with two 12-bit converters, 128 Kbytes of flash and the CORDIC and FMAC accelerators. Figures are from DS12589 Rev 6.
Figures for the QFN member
| Package | UFQFPN48, 7 mm by 7 mm, 0.5 mm pitch, exposed pad |
| Core | Cortex-M4F at 170 MHz, 213 DMIPS |
| Flash and RAM | 128 Kbytes with ECC, 22 Kbytes SRAM plus 10 Kbytes CCM |
| ADC | Two 12-bit converters at 0.25 microsecond, up to 23 channels |
| DAC and analog | Four DAC channels, four comparators, three op amps with PGA |
| Timers | Fourteen, two advanced 16-bit motor control with dead time |
| Fieldbus | One FDCAN, USART, LPUART, SPI, I2C, USB device |
| I/O | Up to 38 fast lines, several 5 V tolerant |
| Supply | 1.71 V to 3.6 V |
| Thermal | Pad soldered to a via field, junction to ambient set by the copper |
| Moisture | Dry pack, floor life according to the bag label |
| Temperature | Minus 40 to plus 85 degrees C, 105 degree junction |
Pad, paste and profile
Three process details decide whether the QFN is reliable. The paste aperture on the thermal pad is split into a window pattern at 60 to 70 per cent coverage, so the body does not float on a solder lake. The pad is stitched with vias to the ground plane underneath, which is the only heat path the part has beyond its leads. And the reflow profile holds the time above liquidus close to the datasheet window, because a long soak at the top end drives more intermetallic growth on a pad joint than on a lead.
Inspection is the limiting step. Optical inspection sees the edge fillet and nothing else, so a first article needs an X-ray turn to confirm voiding on the pad, and a build needs a sample X-ray per lot rather than a full scan. Our tooling and stencil control page sets out the aperture and profiling rules we apply to QFN bodies of this size.
Where the smaller body decides the product
A module that has to fit a 30 mm round housing, a sensor that is potted after test, a board stacked 4 mm under a display: these are the places where the QFN wins, and the difference in height and area is enough to make the product possible. The thermal gain is real too, since the pad couples the die to the plane rather than to four rows of leads.
Where the leaded body wins is service. A unit that comes back for repair can be reworked by hand in a leaded package and needs a reball style operation in a QFN. For a product with a ten year service life and a repair depot, that is a cost that shows up years later and is worth pricing at the start. The MCU cross reference page records which bodies share the die so the choice can be revisited without a new board.
Incoming checks on this string
Is CBU6 the same silicon as CBT6? Yes, and the same pinout, so a board can be built in either body when the copper allows both footprints, which is a common way to keep a second source open. Is the U body available in the 125 degree grade? Yes, but under a different order string, and that string has to be quoted rather than assumed.
A QFN reel that arrives without its moisture indicator is a finding, not a formality, because the floor life depends on the dry pack being intact. Our supplier quality audit page describes what we check on a delivered lot, and the audit trail follows the reel into the build rather than stopping at the receiving door.