STM32G071GBU6
Product Specifications
STM32G071GBU6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics
The STM32G071GBU6 is an STMicroelectronics ARM Cortex-M0+ MCU in UFQFPN-28 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G071GBU6 | Full Part Number | STMicroelectronics ARM Cortex-M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G0 | Series | ARM Cortex-M0+ based MCU — G0 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G071GBU6 |
| Core | ARM Cortex-M0+ |
| Package | UFQFPN-28 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G071GBU6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in UFQFPN-28 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G071GBU6 supported by STM32CubeIDE?
Yes, the STM32G071GBU6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G071GBU6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G071GBU6: 128 Kbytes, two DACs and 64 MHz in a 28 pin QFN
The G071 is the member of the G0 line that keeps the full analog set: two 12-bit DACs, the 0.4 microsecond ADC and the 128 MHz capable timers. The order code reads: 071 subfamily, G is 28 pins, B is 128 Kbytes of flash, U is the UFQFPN body, 6 is the industrial range. The same die is sold from 8 to 48 pins, and the 28 pin body is where the DAC channels and the four USARTs still fit.
The core is a Cortex-M0+ at up to 64 MHz with 36 Kbytes of SRAM, 32 of them behind a hardware parity check. The supply window is 1.7 V to 3.6 V, wider than the value line, and the part carries a USB Type-C power delivery controller and an HDMI CEC interface. The figures below come from ST's product page for the G071 line and its current data sheet.
The order code, character by character
| Product family | STM32, 32-bit Arm microcontroller |
| Product line | G0, mainstream Cortex-M0+ up to 64 MHz |
| Subfamily | 071, with DAC, USB-C power delivery and CEC |
| Pin count and body | G, 28 pins, UFQFPN |
| Flash density | B, 128 Kbytes |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Core | Cortex-M0+ at 64 MHz |
| SRAM | 36 Kbytes, 32 with hardware parity check |
| Supply | 1.7 V to 3.6 V |
| I/O | Up to 60 fast I/Os, several 5 V tolerant |
| Analog | 12-bit ADC at 0.4 us, 16 channels, two 12-bit DACs |
| Timers | 14, two capable of 128 MHz |
| Serial | Four USART, one LPUART, two SPI at 32 Mbit/s, two I2C at 1 Mbit/s |
| Grade | Industrial, ECOPACK2 |
Where the two DAC channels are used
A 4 to 20 mA loop, a bias voltage for a sensor bridge or a reference for a comparator window all need a real analog output, not a filtered PWM. Two channels on the die remove the external converter, its reference and the bus that would have carried the setpoint. With the sample and hold mode the output can also be updated while the core sleeps, which is what a portable instrument needs if the loop has to stay alive between readings.
The USB Type-C power delivery controller is the other feature that changes a bill of materials. A sink that negotiates 5, 9 or 15 V normally needs a separate controller and a handful of passives. Here the negotiation runs on the same die, and the 1.7 V floor lets the product stay on a single cell while it does so.
Questions that arrive with a shortage quote
Is the 071 a drop in for the 070? The footprints match in the same body, but the 070 is a value line part without the DACs and with a 2.0 V supply floor. A board that uses either of those features needs the 071 code, not a substitute.
Does the 28 pin body carry both DAC channels? Both are on the die and both reach pins in this body, but they share pins with ADC inputs. A product that needs two analog outputs and a full set of ADC channels should check the pin map before fixing the footprint.
Can the parity check cover all of the SRAM? The hardware parity is implemented on 32 of the 36 Kbytes. The remaining 4 Kbytes are plain SRAM, which matters for a product that keeps a safety critical buffer in memory.
What to send with an enquiry
Send the quantity, target date, the full order code and which analog outputs the product uses, because that decides whether a neighbouring member will do. We check the code against the current revision on our MCU cross reference page and confirm date codes and packaging on the quotation. The date code management page explains how mixed lots are kept apart, and the pin to pin cross reference page shows which members share the 28 pin footprint.