Contact Us

VBP165R41SFD

Brand: VBsemi
VBsemi VBP165R41SFD is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBP165R41SFD — Discrete & Power Semiconductors | Superb Automation

VBP165R41SFD

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBP165R41SFD from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi specializes in discrete MOSFETs, power transistors, and protection devices at competitive cost for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBP165R41SFD: 650 V, 0.062 ohm and an 80 ns diode, with two rows that overstate the part

The VBP165R41SFD is a 650 V N channel super junction MOSFET with a fast body diode, in the TO-247 body. The summary lists 650 V at maximum junction temperature, 0.062 ohm at a 10 V gate measured at 13.5 A, a 41 A continuous rating at a 25 C case and a body diode that recovers in 80 ns.

The applications on page one are the four that this voltage class always serves: server and telecom supplies, switch mode supplies, power factor correction, and lighting. In all four the switch works against a 380 V to 400 V rail that rises when the load drops, so the 650 V rating is the margin above a 400 V bus and the recovery of the diode is what decides the loss in continuous conduction.

Two rows on this sheet do not survive their own arithmetic, and a buyer should know which two before the part is qualified. The dissipation row prints 290 W against a junction to case figure of 0.57 C per watt, which allows 219 W for the 125 C rise from 25 C to the 150 C junction. The avalanche row prints 1420 mJ against a stated test of 28.2 mH and an 8 A start, which stores 902 mJ. Both are optimistic, and both are covered below with the numbers.

The parameter table in full

Drain source voltage at maximum junction temperature650 V
Gate source voltageplus or minus 30 V
On resistance at 10 V gate and 13.5 A0.062 ohm typical
Gate threshold at 250 microamp2.5 V minimum, 4.5 V maximum
Gate source leakage at 20 V and at 30 Vplus or minus 100 nA and plus or minus 1 microamp
Drain leakage at 650 V, 25 C and 125 C1 microamp and 100 microamp
Forward transconductance at 13.5 A5.6 S typical
Input, output and reverse transfer capacitance4400, 80 and 4 pF
Effective output capacitance, energy and time related63 and 213 pF
Total gate charge at 10 V, 520 V and 8 A68 nC typical
Gate source and gate drain charge15 and 19 nC
Turn on delay and rise time at 520 V and 8 A18 and 24 ns typical, 25 and 55 maximum
Turn off delay and fall time, same conditions80 and 12 ns typical
Internal gate resistance at 1 MHz0.8 ohm
Continuous source drain diode current41 A
Pulsed diode forward current120 A
Diode forward voltage at 8 A1.5 V maximum
Reverse recovery time at 8 A and 400 V80 ns typical
Reverse recovery charge and peak current5.8 microcoulomb and 30 A
Single pulse avalanche energy, 28.2 mH and 8 A1420 mJ
Maximum power dissipation, case at 25 C290 W
Junction to case and junction to ambient0.57 and 62 C per watt
Continuous drain current at 25 C and 100 C case41 A and 25 A
Pulsed drain current120 A
Drain source and diode voltage slope50 and 15 V per ns
Operating junction and storage rangeminus 55 to plus 150 C

The dissipation row claims 71 W more than the thermal path can carry

0.57 C per watt with a 125 C rise from a 25 C case gives 219 W. The sheet prints 290 W, which would need the case held at 25 C and a junction to case figure of 0.43 C per watt. The linear derating factor is 1.67 W per C, and 290 W divided by 125 C is 2.32 W per C, so the derating row agrees with the thermal path and contradicts the dissipation row. When a customer asks what the part can dissipate, the answer is 219 W and the 290 W is a marketing figure.

In still air the ambient path is 62 C per watt, which allows 2.02 W for a 125 C rise. Through 0.062 ohm that is 5.7 A at 25 C and 5.1 A at a 50 C ambient, against a 41 A headline. The gap of seven times is the same one that every TO-247 super junction part shows, and it is why this part is always found bolted to metal rather than standing on a board.

The 41 A continuous row itself is thermally impossible without a heatsink: 41 A through 0.062 ohm is 104 W, which needs a case at 91 C through the 0.57 path. That is a real heatsink, not a copper pour, and the number to quote to a customer is the case temperature at their loss rather than the current rating.

The avalanche row and the diode that the sheet is named after

1420 mJ against a stated 28.2 mH and 8 A start is 902 mJ of stored energy, so the row claims 57 per cent more than the test can produce. Three sheets in this shipment share the same error, and in each case the avalanche figure looks as though it was copied from a part with a larger inductor or a higher starting current. We do not use it to justify a snubberless stage, and a customer who needs avalanche capability on a 400 V bus should ask for the unclamped inductive switching report.

The diode is where this part earns its name. 80 ns of recovery with 5.8 microcoulomb and 30 A of peak reverse current at 8 A forward and 400 V is fast for a super junction diode, and it is what allows a hard switched bridge or a continuous conduction PFC to run at 65 kHz without the diode loss dominating. Against the 41 A sibling in the same body, the 42 A part prints 90 ns for the same charge, so the two are close and the choice between them should be made on the on resistance and the price, not on the diode label.

The peak reverse current of 30 A against a 41 A forward rating is not a soft diode. A phase node with 15 V per ns of allowed diode slope will ring against any board that puts the return path under the die, and the 50 V per ns forward slope is the same story on the other edge. The recovery charge, not the recovery time, is the figure to size a snubber around.

Where a 650 V, 0.062 ohm part is the right choice

A 1 kW to 3 kW server supply at 65 kHz, a telecom rectifier, a 400 V continuous conduction power factor stage and an HID ballast at 100 kHz all fit, provided the heatsink is sized on 219 W of case dissipation and not on the printed 290 W. In the PFC stage the fast diode is worth more than 10 per cent of on resistance, because the diode conducts for a large part of the cycle at light load and the recovery loss lands on the switch.

The part is a poor choice for a bridge at 400 V where the diode conducts continuously, because 30 A of peak reverse current is a large spike and the 15 V per ns slope limits how fast the node may move. A resonant stage or a stage with a silicon carbide diode in parallel is the answer there, not a bigger heatsink.

Our power management cross reference work keeps the recovery charge, the avalanche row and the thermal pair per approved alternate, since the three 650 V parts in this family share a summary page and differ mainly in the diode and the dissipation.

Questions we answer before a reel is booked

First, the gate. A threshold window of 2.5 V to 4.5 V means this is not a logic level device, and the 19 nC of gate drain charge against 15 nC of gate source charge is a very flat split, which is what makes the 24 ns rise time possible. Drive from 10 V, keep the 0.8 ohm internal resistance in mind when choosing the external resistor, and check that the 18 ns turn on delay does not become the whole edge in a slow driver.

Second, the diode half of the name. The 80 ns and 5.8 microcoulomb belong to an 8 A test, so a customer who runs the diode at 20 A should expect the charge to scale with current and the loss to follow it. We quote the test condition with the figure rather than the figure alone, because 5.8 microcoulomb at 8 A and 20 A are two different numbers in the same table.

Third, the alternate. Two 650 V super junction parts at 0.06 ohm with a fast diode can differ by 3.8 microcoulomb of recovery charge and by 70 W of declared dissipation, and the second figure is usually the one that fails in the field. We hold both per approved alternate, the incoming inspection plan checks the lot against the diode charge, and the pin to pin comparison starts from the tab and the creepage distance rather than from the outline.