HXN50151
Product Specifications
HXN50151
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXN50151 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXN50151: a 400 W pair on a 0.96 to 1.4 GHz window and what the rail has to carry
The HXN50151 is a gallium nitride HEMT from Hisiwell filed on the 50 V shelf with a 0.96 to 1.4 GHz window and a 400 times two output row. The multiplication in the power column is the first thing to read: the figure is not a single ended 800 W die, it is a pair of devices that the customer combines, and every downstream number (drive, current, heat, combiner loss, load line) follows from how that pair is built.
The row carries no gain and no efficiency. Both cells are blank, which is normal on this shelf and is not the same as unavailable. It does mean the index cannot close a drive budget or a heat budget on its own, and neither figure belongs in a quotation until the factory supplies a data sheet or a measurement.
There is a second point that matters more than either. The product page calls the part internally matched, while the table that lists it is the unmatched GaN table. On this shelf the word matched usually refers to the input side, with the output network left to the customer board, but the two documents do not say the same thing and the difference decides whether an engineer has one match to build or two. Settle that with the factory before the first board is committed.
The HXN50151 rows as the vendor publishes them
| Part class | Gallium nitride HEMT power transistor, push pull pair |
| Frequency range, index row | 0.96 to 1.4 GHz |
| Window width, calculated | 440 MHz |
| Band ratio, calculated | 1.46 to 1 |
| Saturation output, index row | 400 W times two |
| Pair total, calculated | 800 W, 59.03 dBm |
| Per side, calculated | 400 W, 56.02 dBm |
| Output per gigahertz of window, calculated | 1818 W |
| Band figure on the product page | Above 600 W across 960 to 1215 MHz |
| Band figure in dBm, calculated | 57.78 dBm, 1.25 dB below the pair total |
| Drain rail, index row | 50 V |
| Load voltage at 800 W into 50 ohm, calculated | 200.0 V rms, 282.8 V peak |
| Peak against the rail, calculated | 5.66 times |
| Load voltage per side at 400 W, calculated | 141.4 V rms, 200.0 V peak, 4.00 times the rail |
| Mode, index row | CW |
| Mode, product page | Pulse, longer pulse or CW, thermally optimised for the higher duty |
| Matching, product page | Internally matched, push pull |
| Matching, index shelf | Listed on the unmatched GaN table |
| Gain | Not published |
| Drain efficiency | Not published |
| Package, flange and body | Not published |
| Thermal resistance, junction to case | Not published |
| Pulse width and duty cycle | Not published |
| Load impedance | Not published, no load pull table |
| Data sheet | A product data sheet link that resolves to the vendor public directory, no part document |
| Orderable addendum | None published |
| Packing quantity and moisture level | Not published |
| Applications listed | Wireless infrastructure, wideband amplifier, EMC testing, ISM |
What 800 W does to a 50 ohm load and a 50 V rail
800 W into 50 ohm is 200.0 V rms, which is 282.8 V peak, and that peak sits 5.66 times above a 50 V drain rail. A tuned stage swings above the rail by construction, because the load line is set by the output network and not by the supply, so the ratio is normal. It is still the number that decides three parts of the bill of materials: the breakdown margin of the transistor, the voltage rating of every shunt capacitor in the output match, and the connector and cable insulation.
Read per side the same figure is 400 W, which is 141.4 V rms and 200.0 V peak, exactly 4.00 times the rail. That is the load each of the two devices sees in a push pull pair driven in antiphase, and it is the reason the pair is easier on the passive parts than a single 800 W device would be.
VSWR is the case that hurts. At a 2 to 1 mismatch the pair has to hold 565.7 V peak at the output, and a 3 to 1 case goes higher still. No survival VSWR is published for this part, so the output isolator or the protection threshold has to be chosen from a measurement rather than from a catalogue value, and an amplifier that will meet a real antenna should not be shipped without one of the two.
The heat budget cannot be closed from the row either. If the stage runs at 60 per cent drain efficiency, which is a plausible figure for a GaN pair at 1 GHz and is not a figure the vendor publishes, then 800 W of output means 1333 W of DC input, 26.7 A at 50 V and about 533 W of heat to move. At 70 per cent the same output needs 1143 W of DC input and 343 W of heat. The gap between those two cases is a heatsink decision, and it is the reason the missing efficiency column is a real commercial problem rather than a cosmetic one.
The band figure and the capability figure are 1.25 dB apart
The page states above 600 W across 960 to 1215 MHz in a typical wideband application, and the row states 400 W per side. Both can be true at once: 600 W is what the pair does inside a 255 MHz window that sits inside the 440 MHz window, and 800 W is what the pair is capable of as a class. The gap is 1.25 dB, which is small enough that a proposal can look safe on paper and still fall short on a bench if the customer reads the larger figure as a guaranteed number for the whole band.
The practical consequence is that the window has to be named on the purchase order and on the test sheet. A part specified as 800 W at 960 to 1215 MHz and a part specified as 800 W at 0.96 to 1.4 GHz are not the same purchase, and the second one may not exist at that level anywhere in the band.
The mode row says CW while the page describes a family that was thermally optimised for higher duty cycle or longer pulse up to CW. Read together, the part is offered for continuous operation but the numbers on the page were taken at a pulse condition that is not stated. A continuous duty amplifier therefore needs a bench check at the temperature the heatsink will actually reach, not an extrapolation from a pulse figure.
Where the HXN50151 sits on the 50 V shelf
The nearest neighbours are all pulse parts with published gain. The HXN50152 is 350 W over 960 to 1400 MHz with 14 dB and 65 per cent, the HXN50154 is 800 W over 960 to 1200 MHz with 13 dB and 60 per cent, and the HXN50156x2 is a 1500 W row built from two HXN50156 devices. Against the 800 W member the HXN50151 has the same power with no published gain, so the choice between the two is decided by the band, by the drive that is available and by whether a data sheet exists for the thermal path.
Above them the shelf holds the HX5141K00VP at 1000 W over 960 to 1400 MHz with 18 dB and 70 per cent, which is 0.97 dB more output than the HXN50151 pair and, more usefully, publishes the gain and the efficiency. Where a programme can accept a flanged 1000 W part, that row is the easier one to quote. The full spread, including the drive figure for each row, is on the RF power transistor cross reference page.
What an order for the HXN50151 has to state, and what it cannot yet
No orderable addendum, packing quantity, marking code or moisture level is published for this part, so none of them can be quoted. The purchase order has to carry the part number, the window the amplifier will use, the drain rail, the mode with its pulse width and duty if pulsed, the flange and body variant if one exists, the quantity and the incoming test the buyer will run. Where the buyer intends to run the pair at 800 W continuous, the order should say so, because the vendor figure that supports continuous operation is the 600 W band number and not the class number.
The incoming check is worth building into the order rather than bolting on later: a DC bias check, a small signal sweep across the window, and an output check at the agreed condition on the customer fixture. None of those are RF specification tests on our side, they are the buyer's own gate, and the incoming inspection plan page sets out how to size that gate to the batch. Where the same board also needs its driver, its circulator and its passives against one date, the consolidated route is on the RF component sourcing page.
Questions buyers ask about the HXN50151
Is it one 800 W device or two 400 W devices? Two. The row reads 400 times two, the page calls the part push pull, and the pair is combined on the customer board. A quotation that treats the row as a single ended 800 W die will be wrong about the combiner, the drive split and the heat spread.
Is the input matched inside the package? The page says internally matched and the shelf says unmatched. Until the factory answers, assume the output match is on the board and treat the input as unconfirmed. Either answer changes the bill of materials, so it is not a detail to leave open past the first prototype.
Is the number 600 W or 800 W? 600 W is the wideband figure the page quotes across 960 to 1215 MHz, 800 W is the class figure from the row. For a continuous amplifier sized to the whole 0.96 to 1.4 GHz window, 600 W is the safer anchor and the one to size the heatsink around.
Can it run continuous? The row says CW and the page says the part was thermally optimised for higher duty and longer pulse up to CW. No pulse width, duty or thermal resistance is published, so a continuous claim has to be backed by a measurement at the case temperature the amplifier will reach. Where the whole radio chain is bought against one schedule, the one stop RF supply page covers the consolidated order.