Contact Us

HXN50131

Brand: Hisiwell
Hisiwell HXN50131 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN50131 — Discrete & Power Semiconductors | Superb Automation

HXN50131

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN50131 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN50131: a push-pull pair at 150 W per side from HF to 3 GHz

The HXN50131 is the push-pull member of the Hisiwell 50 V shelf: 150 W per side, 300 W combined, in a frequency window the index states as DC to 3 GHz and the description states as HF to 3000 MHz. It is the only row on this shelf that publishes its topology, and that is the reason to read it separately from the single ended parts around it.

Three hundred watts combined is 54.77 dBm, and 150 W per side is 51.76 dBm. The 0.30 dB gap between this part and the single ended 280 W HXN50141 is the smallest step on the shelf, so the choice between the two is not a power choice at all. It is a choice between even harmonic cancellation on a balanced pair and the simpler bias of a single device.

The frequency wording is worth noting as a small inconsistency. The index says DC to 3 GHz and the description says HF to 3000 MHz. HF conventionally starts at 3 MHz, so the description is narrower at the bottom by three decades. On a part used below 30 MHz the difference matters, and a customer working at 1.8 MHz should ask which wording governs.

The HXN50131 rows as the vendor publishes them

Part classGallium nitride HEMT power transistor, push-pull pair
Frequency range, index rowDC to 3 GHz
Frequency range, descriptionHF to 3000 MHz
Output, per side150 W
Output, per side in dBm, calculated51.76 dBm
Output, combined300 W
Combined in dBm, calculated54.77 dBm
Advantage of the combination, calculated3.01 dB over one side
Drain rail, index row50 V
Mode, index rowContinuous wave
Topology, vendor wordingPush-pull configuration for general purpose and wide band amplification
Harmonic behaviourEven harmonics cancel in the output transformer, odd harmonics do not
GainNot published on the index row
Drain efficiencyNot published on the index row
Package and bodyNot published on the index row
Thermal resistance, junction to caseNot published
Gate bias point and quiescent currentNot published, and a push-pull pair needs two matched bias points
Load impedance, source and loadNot published
Applied application listWireless communication infrastructure, wideband amplifier, EMC testing, industrial scientific and medical
Orderable addendum and packing dataNone published

The bias row is the one that changes the work. A push-pull pair needs two gate bias points that track, and on a GaN pair the quiescent currents have to be set individually or the two halves will not share the load. The vendor publishes no bias point, no quiescent current and no matching data between the halves, so the bias board on this part is a problem that a single ended part does not have.

What the topology buys is real. In a push-pull output transformer the even harmonics of the two halves are in antiphase and cancel in the load, so the second harmonic at the output is suppressed by the transformer rather than by a filter. On a wideband amplifier covering three gigahertz, a filter that suppresses the second harmonic across the whole band is not a practical item, and the transformer does it for free.

The rail and the heat at 300 W combined

Drain efficiency assumedDC input, calculatedDrain current at 50 V, calculatedHeat at 300 W output, calculated
50 per cent600 W12.00 A300 W
55 per cent545 W10.91 A245 W
60 per cent500 W10.00 A200 W
65 per cent462 W9.23 A162 W
70 per cent429 W8.57 A129 W

Twelve amps at the worst corner is a two device problem even though it is one part number, because the pair shares the current and the two paths have to be laid out symmetrically. An asymmetric drain feed on a push-pull pair shows up as a second harmonic that will not null, and that is the most common assembly fault on this topology.

The heat spread from 129 to 300 W is larger than on the single ended rows because both halves dissipate at once. A single flange carrying 300 W is a different thermal object from a 280 W single ended part, not because the number is bigger but because the heat arrives in two places and has to be spread before it reaches the base plate.

At the output, 300 W into 50 ohm is 122.5 V RMS and 173.2 V peak by calculation, 244.9 V peak under a two to one mismatch. The output transformer has to pass that peak without saturating on the low end of the band, which is the second constraint the topology brings and the single ended rows do not have.

Push-pull against the single ended neighbours

HXN50121100 W single ended50.00 dBmSimple bias, one device4.77 dB below this part
HXN50124140 W single ended51.46 dBmSimple bias, one device3.31 dB below
HXN50131150 W per side, push-pull54.77 dBm combinedTwo bias points, transformer outputReference
HXN50141280 W single ended54.47 dBmSimple bias, one device0.30 dB below, no even harmonic cancellation
HX04200F200 W index, 219 W parameter53.01 to 53.40 dBm48 V, flanged, published gain1.37 to 1.76 dB below, documented
HX30370P370 W on 2 to 3 GHz55.68 dBm48 V, flangeless0.91 dB above, narrower band

The comparison with the HXN50141 is the one that decides most projects. Half a decibel is nothing, the topology is everything. A customer building a wideband amplifier that has to meet a harmonic mask takes the push-pull part and lets the transformer do the work. A customer building a narrowband stage with a filter after it takes the single ended part and avoids the second bias point and the transformer.

The HX members on the shelf offer the other trade: less power, more documentation. The HX04200F publishes a gain, an efficiency, a maximum saturated power and a flanged package, and gives up 1.4 to 1.8 dB against this part. For a customer who has to submit a review package, that documentation is often worth more than the power.

The rows are compared on the RF power transistor cross reference, and the route to a matched pair with a measured balance report is on the RF component sourcing page.

Ordering a push-pull pair

No orderable addendum, packing column, marking code or moisture level is published, and none is quoted here. The order should carry the part number, the band, the rail, the continuous wave condition, the per side output, the combined output, the drive level and the quantity. Because this is a pair in one package, the order should also state whether the two halves have to be supplied as a matched set with a balance figure, since nothing published promises that.

Two documents belong with the first order beyond the usual data sheet: a measured balance report between the halves and a bias recommendation for each gate. Neither is published. A pair that arrives 1 dB out of balance will run one side hot and the other cold, and the fault looks like a matching problem at the output until the bias is measured.

Lead time is unpublished. On a push-pull part the test is longer because both halves are measured, and that is worth knowing when a schedule is planned against a single ended alternative.

Where the harmonic behaviour matters more than the power, the qualification path for an alternative is on the one stop RF supply page.

Questions buyers ask about the HXN50131

Is 150 W per side a continuous rating? The index states a continuous wave mode and a 150 W per side figure with no condition. Treat it as a saturation point at the best frequency in the window until the sheet says otherwise.

Does the pair need two bias supplies? Yes in practice. Nothing published gives a common bias point, and a GaN pair with a shared gate voltage will not share current evenly.

Does push-pull remove all harmonics? It cancels even harmonics in the output transformer. Odd harmonics, including the third, are not cancelled and still need a filter if the application has a mask.

Why does the description say HF to 3000 MHz when the index says DC to 3 GHz? The two wordings differ at the bottom of the band by three decades. For use below 30 MHz, ask the factory which one governs.

Where the shelf has to be compared on one axis, the reference is the cross reference page.