HXN50127
Product Specifications
HXN50127
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXN50127 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXN50127: the 280 W bin of the DC to 2 GHz shelf on 50 V
The HXN50127 is the top power row of the DC to 2 GHz group on the Hisiwell 50 V shelf: 280 W of saturation, single ended, internally prematched, continuous wave. It shares its window, its rail and its blank gain and efficiency columns with the HXN50126 below it, and the only published difference between the two is 40 W.
Forty watts on 240 W is 0.67 dB by calculation, which is the whole commercial case for the part and the whole technical case against it. A system that already holds 53.80 dBm with the smaller member gains nothing from the larger one except 0.67 dB of headroom. A system that needs 54.47 dBm at the flange cannot reach it by turning up the drive on the smaller part, because the saturation row is a device limit and not a bias setting.
The distinction that matters in a quotation is not the wattage but the way the two rows were measured. Neither row states a test condition, a frequency, a pulse width or a quiescent current. Two parts on the same shelf with the same silence around them can be binned on a 2 GHz sweep and quoted as a DC to 2 GHz part, and the buyer has no way to tell from the index which one it was.
The HXN50127 rows as the vendor publishes them
| Part class | Gallium nitride HEMT power transistor, single ended, internally prematched |
| Frequency range | DC to 2 GHz |
| Band width, calculated | 2,000 MHz |
| Saturation output, index row | 280 W |
| Saturation in dBm, calculated | 54.47 dBm |
| Advantage over the 240 W member, calculated | 0.67 dB |
| Output per gigahertz of band, calculated | 140 W per GHz |
| Drain rail, index row | 50 V |
| Mode, index row | Continuous wave |
| Gain | Not published on the index row |
| Drain efficiency | Not published on the index row |
| Peak output | Not published |
| Average output | Not published |
| Package and body | Not published on the index row |
| Thermal resistance, junction to case | Not published |
| Gate bias point and quiescent current | Not published |
| Load impedance, source and load | Not published, no table on the product page |
| Applied application list | Wireless communication infrastructure, wideband amplifier, EMC testing, industrial scientific and medical |
| Datasheet link on the product page | Present, target address not resolvable from the public page |
| Orderable addendum and packing data | None published |
Twenty rows, four of them arithmetic on the same single figure, is what the public record holds. The list is short by the standards of a 280 W device and the missing rows are the ones a power amplifier engineer asks for first: gain, efficiency, load line, thermal path. Each of them exists somewhere in the vendor's own documents and none of them is on this page, so any proposal that quotes a drain current or a heat load for this part is quoting something that was not published.
What the page does state is the application list, and it is the same list as the 240 W member: wireless infrastructure, wideband amplifier, EMC testing, industrial scientific and medical. On a DC to 2 GHz window that list is not marketing filler. The band starts at DC, so one part number covers an HF chain, a 433 MHz industrial link, a 900 MHz cellular stage and a 1.8 GHz driver, and a customer with three products in those bands can consolidate on one device.
What 280 W costs on the rail and in the sink
| Drain efficiency assumed | DC input, calculated | Drain current at 50 V, calculated | Heat at 280 W output, calculated |
| 50 per cent | 560 W | 11.20 A | 280 W |
| 55 per cent | 509 W | 10.18 A | 229 W |
| 60 per cent | 467 W | 9.33 A | 187 W |
| 65 per cent | 431 W | 8.62 A | 151 W |
| 70 per cent | 400 W | 8.00 A | 120 W |
The efficiency column is blank on this row for the same reason it is blank on the member below, so the table is an envelope and not a prediction. The useful thing it shows is how narrow the operating window becomes at 280 W. Between 50 and 60 per cent the current moves 1.87 A and the heat moves 93 W. On a continuous wave part that spread is the difference between a flange on a small spreader and a flange on a machined cold plate, and the choice cannot be made before the sheet is read.
Eleven amps at 50 V is a busbar question. The drain feed needs a choke saturated well above the peak current of the modulation, and a bulk bank on the rail that holds the voltage through the envelope. A 280 W part fed from a supply that sags two volts under load loses output twice: once in the drain voltage and once in the gain, and the second loss is the one that surprises a bench test.
At the output, 280 W into 50 ohm is 118.3 V RMS and 167.3 V peak. A two to one mismatch takes the peak to 236.6 V. Capacitors, the directional coupler and any circulator in the path are chosen against that number, and the load protection on a test bench for this part is not optional.
Two bins, one window, and what separates them
| HXN50122 | 130 W | 51.14 dBm | Unmatched | Entry point on the window |
| HXN50126 | 240 W | 53.80 dBm | Internally prematched | 0.67 dB below this part |
| HXN50127 | 280 W | 54.47 dBm | Internally prematched | Reference |
| HX25400F | 400 W index, 240 W parameter list | 56.02 dBm on the index figure | 28 or 48 V, flanged | 1.55 dB more on the index, published gain and efficiency |
| HX25600F | 600 W index, 320 W parameter list | 57.78 dBm on the index figure | 28 or 48 V, 650F2 | 3.31 dB more on the index, full data sheet with tables |
| HXN50141 | 280 W on the 3 GHz window | 54.47 dBm | 50 V, single ended | Same power, 1 GHz more band, different family |
The interesting comparison is not with the neighbour but with the HX parts. On the HX25400F the index says 400 W but the parameter list on the same page says a maximum output above 240 W, a best drain efficiency above 82 per cent and a linear gain above 19.5 dB. So the part that looks 1.55 dB stronger on the index is, by its own parameter list, at or below the HXN50127 on output while publishing two numbers the HXN rows do not publish at all. That is a straight trade: measured data against a paper wattage.
The HXN50141 comparison is the one that catches people out. It quotes the same 280 W on a DC to 3 GHz window. On a part with a fixed die, a wider band normally costs gain at the top of the window, and the family publishes no sweep to show how much. Anyone moving from 2 to 3 GHz between these two rows should assume the top of the band is a separate question and ask for the sweep before the board artwork is frozen.
The cross reference for the family is on the RF power transistor page and the sourcing route for a measured sample is on the RF component sourcing page. Both are intent pages for a buyer who already knows the band and needs the paper trail behind the part.
Ordering this part without inventing a suffix
No orderable addendum, no packing column, no marking code and no moisture level are published for the HXN50127. This page quotes none of them and offers no order code. A purchase order for a 280 W transistor that carries a guessed suffix is a returns problem, and the correct field set is the plain part number plus the band, the rail, the mode, the output point at the flange, the drive level expected and the quantity.
Two documents belong with the first order: the data sheet for the exact part and a measured report at the frequency in use. The product page links a data sheet, but the link target does not resolve from the public page, so the copy has to be checked against the label on the part rather than trusted from the browse path. That is a small step that has caught more than one project on this shelf.
Lead time is not published. The variables that move it on a 50 V shelf part are the package and the test, and neither is visible on the index row. Before a factory reply the accurate answer is that the schedule is open, and a distributor that quotes a firm date off the index alone is quoting something that was never published.
For a second source, the right move is a part with published curves at the same band and rail, not a part with the same watts. One stop RF supply sets out how a substitute is qualified and which measurements have to be repeated on the board.
Questions buyers ask about the HXN50127
Is the 280 W figure measured at 2 GHz or at DC? The row does not say. The band is DC to 2 GHz and the power is a single number, so the prudent reading is that it is a best case within the window and that the sweep decides. Ask for the sweep at the frequency of use.
Why is there no gain number? The family omits gain and efficiency on the index for most members. It is not withheld on request; it is simply not in the public table. The data sheet carries it and the product page links to it.
Can two of these be combined for more power? Nothing in the published record says how, and no combiner guidance is given. A 54.47 dBm part combined in a balanced pair is a system question about amplitude and phase balance, and it is not answered by the index row.
Does the prematched input mean no input network? It means the input match is inside the package. A DC block, a bias tee on the gate and the pad to the driver are still board work, and the value of the internal match is that those three no longer have to solve a 2 GHz conjugate match.
Where two shelves have to be compared on one line, the reference is the cross reference, and the next step is a two part short list with the rail and the band fixed.