Contact Us

HXN40048

Brand: Hisiwell
Hisiwell HXN40048 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN40048 — Discrete & Power Semiconductors | Superb Automation

HXN40048

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN40048 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN40048: ten watts at 4.4 to 5 GHz on a 28 V rail

The HXN40048 sits one rung above the five watt member of the same band. The vendor row reads 4.4 to 5 GHz, saturated output at least 40 dBm, gain at least 12 dB, drain efficiency at least 45 per cent, 28 V drain rail, plus or minus 0.8 dB of flatness, continuous wave. The product page adds 50 ohm at both ports and describes the match as in plane synthesis on a film hybrid carrier.

Ten watts of radio frequency at 45 per cent efficiency draws 22.2 W from the 28 V rail, which is 0.79 A, and leaves 12.2 W of heat to leave the flange. Drive at the 12 dB gain floor is 28 dBm, one watt, which is a level a packaged driver or a two stage discrete chain reaches without difficulty. Every one of those figures is calculated from the published rows and is marked as such wherever it appears.

The step from five to ten watts costs 3 dB of output and doubles the dissipation, so the heatsink and the feed are the two things that change when a system moves up from HXN40047. The band, the rail, the gain floor and the flatness do not change, which is what makes the pair usable as a family in one product line.

Ten watts is also the level where a single ended stage stops being casual. The 50 ohm load voltage at saturation is 22.4 V RMS and 31.6 V peak, so the output network, the connectors and any test cable in the path have to be rated well above the 28 V rail. A test bench built for a five watt part will flash over on this one.

The parameter rows Hisiwell publishes for HXN40048

Part classGallium nitride power transistor, internally matched
Frequency range4.4 to 5 GHz
Bandwidth, calculated600 MHz, 12.8 per cent fractional at a 4.70 GHz centre
Saturation output power as publishedat least 40 dBm
Saturation output power in watts, calculated10.00 W
Gain as publishedat least 12 dB
Drain efficiency as publishedat least 45 per cent
Drain voltage28 V
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Input impedance50 ohm
Output impedance50 ohm
Match technology as described by the vendorin plane matching synthesis, film hybrid integration
Output at 1 dB compressionnot published, the index prints a slash
DC input at saturation, calculated22.2 W
Drain current at saturation, calculated0.79 A at 28 V
Dissipation at saturation, calculated12.2 W
Dissipation if efficiency falls to 40 per cent, calculated25.0 W
Drive power for the rated output, calculated28 dBm, 0.63 W
Output per 100 MHz of the band, calculated1.67 W
Load voltage at saturation into 50 ohm, calculated22.4 V RMS, 31.6 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, one image on the product page
Scattering parametersnot published
Pinch off voltage and gate bias pointnot published
Operating and storage temperaturenot published
Moisture level and floor lifenot published
Orderable addendum and packingnot published
Neighbour on the same band at 37 dBmHXN40047, same rail, same gain floor
Neighbour on the same band at 43 dBmHXN40049, same rail, same gain floor

Where ten watts sits in the thermal budget

12.2 W of dissipation on a carrier offering 3 C per watt rises 37 C over the case, and on one offering 5 C per watt it rises 61 C. With a 100 C case limit that is comfortable, and with an 85 C limit it is not, so the sink and the ambient decide the answer rather than the transistor. The vendor publishes no junction to case figure, so the carrier has to be measured or taken from the mechanical drawing.

The efficiency row is a minimum, which means the dissipation figure is a worst case at 45 per cent and the real part will usually run cooler. A build quoted against 38 per cent instead of 45 per cent sees 26.3 W of dissipation, more than double, so the derating choice at the proposal stage decides how much heatsink is ordered.

One figure belongs on the build record at first article: the flange temperature after thirty minutes at saturation. With no junction to case number from the vendor, that measurement is the only thing that closes the thermal question, and a fifteen degree gap between the flange and the sink bolts is common on a hand built assembly.

Backing off 6 dB drops the output to 2.51 W and, at an assumed 30 per cent efficiency in backoff, leaves 5.9 W of heat. That is the operating point of a link that runs below saturation for linearity, and it is the reason a 10 W part often sits in a 2 W application.

Choosing between the 4.4 to 5 GHz members

The band carries seven published parts: 37, 40, 43, 47, 50, 51 and 53 dBm. Three of them sit on 28 V continuous wave and are interchangeable in a feed built for the smallest, which are 37, 40 and 43 dBm. The 47 and 50 dBm members keep the 28 V rail but drop the gain floor to 11 and 10 dB, so the driver has to grow even though the supply does not.

Above that the rail or the mode changes. The 51 dBm member runs on 32 V, and the 53 dBm member is pulsed at 100 microseconds and 10 per cent duty. A procurement list that treats the whole band as one family will order the wrong feed for two of the seven parts.

Where a part is being replaced rather than specified new, the rail and the mode come first and the power second. Our obsolete RF part replacement page sets out what we ask for before a candidate is offered: the original rail, the duty cycle, the band edges and the gain at the operating point.

What the vendor does not publish for this part

There is no data sheet. The vendor publishes an index row across nine columns and a product page that repeats five of them, and neither carries curves, scattering parameters, a thermal resistance or a gate bias window. Any statement about behaviour between the four published points is an inference, and we mark it that way on the page.

There is no orderable addendum either. No packing column, no marking code and no moisture level appear, so the purchase order has to carry the part string, the band and the quantity, and the reel or tray format is confirmed with the factory at the quotation stage.

There is no absolute maximum table. The 28 V rail is an operating point, and how much overshoot the drain will take is not stated, which is an argument for a clamped feed and a conservative clamp on the drain choke. Our RF component sourcing page carries the checklist we use when a vendor document is this thin.

Questions buyers ask about HXN40048

Is the 40 dBm figure saturated output. Yes, the index column is headed Psat and the value is printed as at least 40 dBm, so it is a floor at saturation across the band rather than a typical at one frequency.

Can the two 28 V members be swapped in one build. HXN40047 and HXN40048 share the band, the rail, the gain floor and the flatness, so the feed and the driver are the same and only the power and the dissipation change. That is the pair a product line uses to cover two output classes.

What about the 43 dBm member. HXN40049 doubles the output again for 6 dB more, still on 28 V and still continuous wave, and it is the last member of the ladder that keeps the 12 dB gain floor.

How does the part reach a customer. Through the RF procurement route, with the band, the rail and the mode named on the request, and with the factory confirming packing before a date is given.