Contact Us

HXN40039

Brand: Hisiwell
Hisiwell HXN40039 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN40039 — Discrete & Power Semiconductors | Superb Automation

HXN40039

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN40039 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN40039: 251 W over the 3.1 to 3.4 GHz band at 55 per cent efficiency

The HXN40039 is the efficiency member of the Hisiwell S band group. It covers 3.1 to 3.4 GHz, a 300 MHz window, and delivers at least 54 dBm at saturation, which is 251.2 W, with 13 dB of gain and at least 55 per cent typical drain efficiency from a 50 V rail, in 100 microsecond pulses at a 10 per cent duty cycle, with plus or minus 0.8 dB of flatness.

Fifty five per cent is the highest efficiency printed on any 50 V S band part in this family, and it changes the arithmetic more than the output does. At 55 per cent the rail supplies 456.7 W, the drain current is 9.13 A and the heat is 205.5 W during the pulse; at 48 per cent, which is the figure on the 56 dBm member next to it, the same 251 W of radio frequency would cost 523 W from the rail and 272 W of heat.

On a 10 per cent duty cycle the average dissipation is 20.6 W and the average current 0.91 A, so a compact forced air carrier handles the steady load. The peak numbers are what the supply, the feed and the flange see, and they set the class of the whole assembly.

The 300 MHz band is narrow relative to the octave members below, and that is the trade that buys the efficiency: a match tuned over 300 MHz wastes less of the die than one stretched over a gigahertz, and the vendor's own numbers show the pattern from 45 per cent on the wide band members up to 55 per cent here.

The parameter rows Hisiwell publishes for HXN40039

Part classGallium nitride power transistor, internally matched
Frequency range3.1 to 3.4 GHz
Bandwidth, calculated300 MHz, 9 per cent fractional
Saturation output power as publishedat least 54 dBm
Saturation output power in watts, calculated251.2 W
Gain as publishedat least 13 dB
Drain efficiency as publishedat least 55 per cent, typical
Drain voltage50 V
Flatness across the bandplus or minus 0.8 dB
Operating modepulsed, 100 microsecond width at 10 per cent duty
Input impedance50 ohm
Output impedance50 ohm
Output at 1 dB compressionnot published, the index prints a slash
DC input at saturation, calculated456.7 W
Drain current at saturation, calculated9.13 A at 50 V
Dissipation during the pulse, calculated205.5 W
Average dissipation at 10 per cent duty, calculated20.6 W
Average drain current at 10 per cent duty, calculated0.91 A
Charge drawn per 100 microsecond pulse, calculated0.91 mC
Drive power for the rated output, calculated41 dBm, 12.6 W
Dissipation at 48 per cent efficiency, calculated272.1 W
Output per 100 MHz of the band, calculated83.7 W
Thermal resistance, junction to casenot published
Transient thermal impedancenot published
Package outline and dimensionsnot published in text, one image on the product page
Scattering parametersnot published
Pinch off voltage and gate bias pointnot published on this page
Operating and storage temperaturenot published
Moisture level and floor lifenot published
Orderable addendum and packingnot published
Neighbour at 56 dBm on the same windowHXN40040, 48 per cent efficiency
Neighbour at 57.5 dBm on a wider windowHXN42013 over 3.1 to 3.5 GHz at 55 per cent

What fifty five per cent is worth at a quarter of a kilowatt

Seven points of efficiency between 48 and 55 per cent is 66.6 W of heat and 1.6 A of pulse current for the same 251.2 W of radio frequency. On a pulse of 100 microseconds at 10 per cent duty that is 6.7 W of average load, which looks small, and 66 W of instantaneous heat, which is not: the die surface, the solder interface and the flange all see the peak, and the junction excursion inside the pulse is proportional to it.

The saving carries through the supply as well. Four hundred and fifty seven watts against 523 W from a 50 V rail is a smaller capacitor bank, a smaller feed and a lower current limit setting, and on a platform where the DC budget is shared across several amplifiers that difference decides whether one more stage can be added.

The efficiency row carries a typical marker, so the number is not a floor. A purchase specification that needs 55 per cent has to ask for it in writing, and the first article has to demonstrate it at a defined frequency point rather than at the middle of the band by assumption.

What the narrow band costs is flexibility. Three hundred megahertz around 3.2 GHz covers the S band radar allocations and the fixed link blocks inside that stretch, and a system that has to reach 3.6 GHz or 2.9 GHz needs a different member of the same ladder.

An internally matched part spreads its match across the band it is built for, and a narrower band means a better match at the centre and less compromise at the edges. The printed plus or minus 0.8 dB of flatness says little on its own; what matters is that the flatness is achieved over 300 MHz rather than over 1000 MHz, which is the difference between a match that is nearly ideal at 3.25 GHz and one that is stretched.

The practical benefit is visible in efficiency and in gain. Thirteen decibels of gain against 12 dB on the wider members and 55 per cent against 48 to 50 is the shape of a part that is not fighting its own bandwidth. For a radar with a fixed 3.1 to 3.4 GHz allocation, that is free performance.

The practical cost is that the part will not cover an adjacent allocation without loss. A system that needs 2.9 to 3.5 GHz has to accept the wider member at 48 per cent or use two amplifiers, and the choice is between 66 W of extra heat and a second flange.

Heat, droop and the hundred microsecond pulse

At 9.13 A of pulse current the charge drawn per pulse is 0.91 mC, so a rail allowed to sag 1 V needs about 0.9 mF close to the device. The loop between the bank, the feed and the flange is short on a well built amplifier, and at this current the droop at the leading edge is where a 54 dBm build turns into a 53.5 dBm product on the bench.

Two hundred and five watts of instantaneous heat with no transient thermal impedance published is the same gap as everywhere in this family. The defensible approach is a case temperature measured at the rated pulse on the first article, held against the 75 C case recommendation printed in the family's one full document, and a margin agreed with the customer rather than assumed.

On the average side, 20.6 W is easy: a carrier at 1 C per watt gives 21 C of average rise, which any heatsink with a real thermal resistance holds. The number that decides survival is the junction excursion inside the pulse, and that measurement belongs on the vendor's data or on the customer's bench, not in a spreadsheet.

Where a 251 W narrow band pulse stage fits

The fit is a radar transmitter with a fixed 3.1 to 3.4 GHz allocation, an instrumentation radar, a satellite ground station driver or a high power test amplifier. Two hundred and fifty watts in 100 microsecond pulses at 10 per cent duty is a practical surveillance class, and 55 per cent efficiency keeps the cooling inside a forced air budget that a 48 per cent part would push into liquid.

It is a poor fit for any application that needs the band to move, for continuous wave at this power, and for a system that needs a published compression point. Our RF power transistor cross reference work shows this part against the 56 dBm member on the same window and the 57.5 dBm member on the wider one, with the efficiency of each printed, because that row decides the cooling more than the dBm does.

For a defence build the temperature class and screening questions are set out in our defence grade component supply view, since the vendor publishes no operating range for this part at all.

Questions we answer on HXN40039 before a lot is booked

The first is the allocation. A 300 MHz match is not a starting point for a wideband requirement, and the band edges have to be stated in the purchase order rather than implied.

The second is the efficiency floor. The 55 per cent is a typical, and the cooling and the supply are sized by it.

The third is the arriving lot. No marking code, no moisture level and no orderable addendum are published, so the purchase order names the band, the rail and the pulse condition, and the incoming inspection plan records the flange and the DC behaviour. The RF procurement process puts the pulse width, the droop allowance and the case temperature target in front of the vendor before the first shipment.