Contact Us

HXC50169

Brand: Hisiwell
Hisiwell HXC50169 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC50169 — Discrete & Power Semiconductors | Superb Automation

HXC50169

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC50169 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC50169: 140 W push pull on 28 V, where 2.2 W of drive is the whole story

The HXC50169 is a Hisiwell LDMOS RF power transistor at 70 W per device, two devices in a push pull pair, a 28 V rail and a band edge at 1 GHz. The index row gives 18 dB of gain and 60 per cent efficiency, and the vendor page adds nothing to those figures: it calls the part a 140 watt capable, highly rugged, unmatched LDMOS FET for wide band commercial and industrial work from HF to 1 GHz, and lists the same application bands as its neighbours.

Eighteen decibels is the number that makes this row easy to use. For 140 W it means 2.22 W of drive, 33.46 dBm, which a single small stage can deliver with margin. The 230 W pair next to it on the shelf needs 7.27 W at 15 dB and therefore a two stage driver. Three decibels of gain on the transistor removes a whole amplifier stage from the system, and a stage removed is a stage that cannot oscillate, cannot drift with temperature and does not have to be aligned on the production line.

The page publishes no parameter block, no pulse width, no duty cycle, no thermal resistance, no load pull table and no orderable addendum, so the row and the two figures on it are all a buyer gets. What follows keeps those figures, adds arithmetic that can be repeated on a calculator, and labels every assumed efficiency as an assumption.

The HXC50169 rows as the vendor publishes them

Part classLDMOS RF power transistor, unmatched, push pull pair
Frequency range, index rowHF to 1 GHz
Frequency range, vendor pageHF to 1 GHz
Output per device, index row70 W
Output for the pair, calculated140 W
Output in dBm, per device, calculated48.45 dBm
Output in dBm, pair, calculated51.46 dBm
Step from one device to the pair, calculated3.01 dB
Gain, index row18 dB
Efficiency, index row60 per cent
Drive for 140 W at 18 dB, calculated2.22 W, 33.46 dBm
Load voltage at 140 W into 50 ohm, calculated83.7 V rms, 118.3 V peak
Peak against the 28 V rail, calculated4.23 times
Peak at a 2 to 1 mismatch, calculated236.6 V
Peak at a 3 to 1 mismatch, calculated204.9 V
DC input at 60 per cent, calculated233.3 W
Drain current at 28 V and 60 per cent, calculated8.33 A
Heat to remove at 60 per cent, calculated93.3 W, 46.6 W per device
DC input at 50 per cent, calculated280.0 W
Drain current at 28 V and 50 per cent, calculated10.00 A
Heat to remove at 50 per cent, calculated140.0 W
Mode, index rowCW
Drain rail, both sources28 V
Thermal resistance, junction to caseNot published
Load impedance and load pullNot published
Package and drawingNot published
Pulse width and duty cycleNot published
Orderable addendum and packingNone published
Applications listed on the pageHF short wave, ground communication, TV VHF I, FM, avionics, commercial ground, TV VHF III, jammer, TV UHF, ISM and instrumentation

What 140 W at 28 V asks of the supply and the network

140 W into 50 ohm is 83.7 V rms and 118.3 V peak, which is 4.23 times the 28 V rail. That is the lowest multiple on this part of the shelf and it is the reason a 28 V pair at this power is a comfortable build: the network transforms 50 ohm down less aggressively than on the 230 W row, the circulating current in the match is lower, and a standard laminate with 1 ounce copper will take it.

At 60 per cent the pair draws 233.3 W and 8.33 A, and leaves 93.3 W to remove, 46.6 W per device. At 50 per cent it draws 280.0 W and 10.0 A and leaves 140.0 W. The published 60 per cent should be used for planning, but the cold plate and the supply should still be sized for the 50 per cent case, because the published figure is a class number taken at a particular frequency and a particular drive, and the part will be run at neither of them exactly.

The drive is the interesting quantity. 2.22 W at 33.46 dBm can come from a single MMIC or a small LDMOS stage, and the driver does not need its own protection loop, its own cold plate or its own matching section beyond a simple pad. That removes cost and, more importantly, removes a stage whose failure would take the whole amplifier down.

The 1 GHz edge is where the balun decides the result. A push pull pair needs a balun at the input and at the output, and at 1 GHz a transmission line balun on a 0.762 mm laminate is small enough to be built on the board but sensitive to the ground plane under it. Ask for the fixture drawing, and if there is none, measure the balun alone before connecting the devices, because a 0.4 dB balun loss at the output is 0.4 dB that no amount of device selection recovers.

The rows around the HXC50169 at this power

HXC50175, 115 W per device, 28 V230 W, 53.62 dBm, 15 dB, 65 per cent, 2.16 dB above this pair
HXC50169, 70 W per device, 28 V140 W, 51.46 dBm, 18 dB, 60 per cent, the row this page covers
HXC50143, 100 W single, 28 V100 W, 50.00 dBm, 18 dB, 65 per cent, 1.46 dB below the pair
HXC50142, 20 W single, 12.5 V20 W, 43.01 dBm, 15 dB, 65 per cent, 8.45 dB below the pair
HXC50101, 200 W single, 50 V200 W, 53.01 dBm, 17 dB, 60 per cent, 1.55 dB above, 50 V rail
HXC50069, 270 W single, 28 V270 W, 54.31 dBm, 15 dB, 65 per cent, 2.85 dB above, 0.7 to 1 GHz
HXC50132, 150 W single, 50 V150 W, 51.76 dBm, 15 dB, 55 per cent, 0.30 dB above, 0.9 to 1.5 GHz
HXC50156, 40 W single, 28 V40 W, 46.02 dBm, 20 dB, 60 per cent, 5.44 dB below

The nearest alternative is the 150 W single ended row on 50 V, which is only 0.30 dB above and removes the balun entirely. A buyer who already has a 50 V rail should look at that row before this one, because the single device is simpler and the power is the same within a third of a decibel. This pair earns its place where the rail is 28 V and cannot be changed, which is the case in a vehicle or a mobile rack.

Against the 230 W pair the step is 2.16 dB for a smaller die and a much easier driver. Where 140 W meets the requirement, taking the larger part buys 2.16 dB and costs 5.05 W of extra drive plus a second driver stage, which is a poor trade unless the extra power is actually used.

Push pull at 140 W and the second harmonic

A push pull pair cancels the even order products at the output, so the second harmonic is rejected before the filter sees it. In a mobile radio or a TV translator that matters, because the second harmonic of the operating channel often lands in a service that is licensed to somebody else, and the filter that would otherwise be needed at 140 W is larger than the amplifier.

The cancellation depends on balance. A one decibel amplitude difference or a five degree phase difference between the two legs leaves a residual second harmonic, and the residual is what the filter has to reject. At 140 W the effect is smaller in absolute terms than at 230 W but the requirement is often tighter, because a mobile product has less room for a filter. Measure the second harmonic on the first article with the balun in place rather than on a single device on a test fixture, because the balun is where the balance is lost.

Thermally the pair is a benefit. 93.3 W of heat spread over two flanges is 46.6 W each, which a modest cold plate handles with a comfortable junction temperature. A single device at the same power would put the whole heat load through one interface, and the interface is where a small amplifier usually fails first.

Incoming inspection on a 28 V pair

A pair needs its two devices matched and the vendor publishes no matching specification for this row. On the first article measure the quiescent current of both devices at the same gate voltage, the gain of each leg in the fixture, and the phase of each leg at the band centre. Record the three figures, because the second order will be compared against them and the comparison is the only way to know whether a change in performance came from the devices or from the fixture.

The incoming inspection plan page covers the electrical sequence in full. The additions for this row are the match check between the two devices in a lot, a note on the report saying whether the pair was tested as a pair or as two singles, and the second harmonic at rated power with the production filter fitted.

Where the part is bought for a mobile product, the first article should be run at the lowest supply the product will see rather than at 28 V nominal. A 28 V rail in a vehicle sags, and a part that makes 140 W at 28 V may make 120 W at 24 V. That figure belongs in the specification rather than in a surprise at the customer's test house.

Questions buyers ask about the HXC50169

Is 140 W the pair or one device? The pair. The row is 70 W times two and the page calls the part 140 W capable. One device is 70 W, 48.45 dBm.

How much drive does it need? 2.22 W, 33.46 dBm, at the published 18 dB. That is the lowest drive requirement of the rows on this part of the shelf and it removes a driver stage.

What is the current draw? 8.33 A at 28 V and 60 per cent, 10.0 A at 50 per cent. The supply should be rated above the higher figure with margin for the driver.

How much heat is there? 93.3 W at the published 60 per cent and 140.0 W at an assumed 50 per cent, split between two flanges. The cold plate should be sized on the higher figure.

Is there a data sheet or a thermal resistance? Neither. No document is linked, and no junction to case resistance is published, so a junction temperature cannot be computed from the row alone.

What is the alternative on a 50 V rail? The 150 W single ended row at 0.9 to 1.5 GHz is 0.30 dB above this pair and needs no balun. If the rail can be 50 V, that row is the simpler build.

For price and lead time on the HXC50169 against the 230 W pair and the 100 W single, send the quantity, the rail and the sub band to the RF component sourcing desk. Where the part replaces an incumbent in a mobile amplifier, the cross reference page starts from the incumbent so the first article is judged at equal drive rather than at equal output.