HXC40039
Product Specifications
HXC40039
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40039 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40039: thirty six decibels on the 9 to 10 GHz window
The HXC40039 is the entry member of the Hisiwell gallium arsenide internally matched group on 9 to 10 GHz, the window that sits just above the 8.5 to 9.6 GHz group at the low end of X band. It is built on in-plane matching synthesis with thin film hybrid integration and presents 50 ohm at both ports. The index row reads output at 1 dB compression at least 36 dBm, gain at least 8 dB, drain efficiency at least 35 per cent, 10 V drain, plus or minus 0.8 dB flatness, continuous wave, with the saturation column left empty.
36 dBm is 3.98 W and the drive for it is 28 dBm, 0.63 W. At 35 per cent the DC input is 11.37 W, the drain current 1.14 A and the heat 7.39 W. This is the same electrical shape as the 8.5 to 9.6 GHz member one step down in band, and that is not a coincidence: the vendor keeps the ladder identical across the two windows so a line up can move band without changing its level plan.
The window is 1.0 GHz from 9 to 10 GHz, 10.53 per cent fractional at a 9.5 GHz centre. It is the narrowest of the four windows in this gallium arsenide range, which matters when a plan has to cover channels either side of 9.5 GHz: the 8.5 to 9.6 GHz group reaches lower, and only the 8.5 to 11 GHz high gain part covers both.
The parameter rows Hisiwell publishes for HXC40039
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 9 to 10 GHz |
| Bandwidth, calculated | 1000 MHz, 10.53 per cent fractional at a 9.5 GHz centre |
| Output at 1 dB compression as published | at least 36 dBm |
| Output at 1 dB compression in watts, calculated | 3.98 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 8 dB |
| Drain efficiency as published | at least 35 per cent |
| Drain voltage | 10 V |
| Input and output impedance, as stated by the vendor | 50 ohm at both ports |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 28 dBm, 0.63 W |
| DC input at compression, calculated | 11.37 W |
| Drain current at compression, calculated | 1.14 A at 10 V |
| Dissipation at compression, calculated | 7.39 W |
| Dissipation if efficiency reaches 45 per cent, calculated | 4.86 W |
| Output per 100 MHz of the band, calculated | 0.40 W |
| Load voltage at compression into 50 ohm, calculated | 14.10 V RMS, 19.94 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text, the product page carries one outline image |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour on the same window at 39 dBm | HXC40040, 30 per cent, 2.65 A |
| Neighbour on the same window at 41 dBm | HXC40041, 30 per cent, 4.20 A |
The efficient end of a four member window
Within the 9 to 10 GHz group this part is the one with the least heat. Seven point three nine watts against 18.53 W at the next step and 29.38 W at the one above is the difference between a passive base plate and a fin stack with forced air. Programmes that start from the antenna and work backwards often find that 3.98 W is enough, and the temptation to buy the bigger member costs a heatsink, a fan and a rail current that the enclosure was never planned for.
The 35 per cent efficiency is quoted at compression, the same condition as the output and the gain. Because the saturation column is empty there is no second operating point to compare with, and the efficiency at a backed off level is not published. A level plan should therefore treat 35 per cent as the best case at the compression point and carry the DC budget at that figure plus a margin.
At 1.14 A the rail is easy. A small buck converter or even a low dropout regulator from a 12 V bus, with 2.28 W of drop, is workable when the chassis can absorb it. That makes this the least demanding member of the group to power, which is a real advantage in a unit that has to run from a battery or from a 24 V industrial bus.
The 9 to 10 GHz window in service
Nine to ten gigahertz covers the maritime radionavigation band at 9.3 to 9.5 GHz and the airborne weather radar allocation near 9.375 GHz, and it carries a long tail of fixed links and telemetry channels. A transmitter on this window is usually a compact unit with a small antenna, which is why the 3.98 W member is common: the path is short, the antenna has gain, and the extra decibels of a larger device buy nothing the link needs.
Compared with the 8.5 to 9.6 GHz group this window is 100 MHz higher at the bottom edge and 400 MHz higher at the top. A plan that spans 9.2 to 9.8 GHz fits here and not there, and a plan that starts at 8.6 GHz fits there and not here. That single fact decides which group is quoted, and it is worth checking before comparing power figures between members of the two windows.
For a system that has to cover both, the 8.5 to 11 GHz high gain part is the only single device in this catalogue that spans them, at 2.51 W and 40 per cent. Where 3.98 W is needed across a wider span, two parts with a switch is the only honest answer.
The ladder at 9 to 10 GHz around HXC40039
Four members cover this window and they follow the same three decibel steps as the group below: 3.98 W at 35 per cent, 7.94 W at 30 per cent, 12.59 W at 30 per cent, and then a saturation only 25.12 W part at 30 per cent with six decibels of gain. What changes is the gain, which falls from eight decibels at the two lower members to seven at the 41 dBm one and six at the saturation only part.
That falling gain is the most useful thing to know about this window. Going from 39 to 41 dBm costs a decibel of gain, so the drive goes from 1.58 W to 2.51 W rather than holding at 1.26 W. Going to the saturation part costs two decibels of gain, so the drive is 6.31 W at 38 dBm. In a line up where the driver is fixed, the highest member that the driver can still reach is the practical limit.
The RF power transistor cross reference compares the members of both windows on the same page, and the one stop RF supply page describes how a driver and a final are quoted together.
Questions buyers ask before ordering HXC40039
Does the part cover 8.5 GHz? No. The window starts at 9 GHz. The group below covers 8.5 to 9.6 GHz, and the two overlap only between 9 and 9.6 GHz.
What is the saturated output? Not published. The index leaves that column empty for this part, so the 36 dBm figure is a compression point and nothing else should be inferred from it.
Is the gain flat across the band? The plus or minus 0.8 dB is the stated flatness, and the gain figure is a minimum over the window, so the two together describe the worst case rather than a typical curve.
How do we start? Send the band edges you need, the output at the antenna, the duty, the ambient and the rail. We will confirm whether this window or the one below it fits, quote from the current factory schedule, and ship a sample with the factory test data at the band edges and centre.