Contact Us

HXC40036

Brand: Hisiwell
Hisiwell HXC40036 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40036 — Discrete & Power Semiconductors | Superb Automation

HXC40036

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40036 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40036: seven point nine four watts from a 1.1 GHz window on 8.5 to 9.6 GHz

The HXC40036 is the middle member of the Hisiwell gallium arsenide internally matched group on 8.5 to 9.6 GHz. It is built on in-plane matching synthesis with thin film hybrid integration and presents 50 ohm at both ports, which is what lets a fifty ohm board run straight into the package without a matching network. The published row is output at 1 dB compression at least 39 dBm, gain at least 8 dB, drain efficiency at least 30 per cent, 10 V drain, plus or minus 0.8 dB flatness, continuous wave, with the saturation column left empty.

39 dBm is 7.94 W, twice the output of the 36 dBm member on the same window. The efficiency drops five points to reach it, so the DC input rises to 26.47 W and the drain current to 2.65 A, and the heat goes from 7.39 W to 18.53 W. That is the real cost of the extra three decibels and it is the number that a chassis has to absorb.

The bandwidth is unchanged at 1100 MHz across the group, 12.15 per cent fractional at 9.05 GHz. The gain is also unchanged at 8 dB, which is worth noting because it means the drive requirement scales exactly with the output: 1.26 W of drive at 31 dBm, still within reach of a packaged driver, but no longer within reach of a small signal stage.

The parameter rows Hisiwell publishes for HXC40036

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range8.5 to 9.6 GHz
Bandwidth, calculated1100 MHz, 12.15 per cent fractional at a 9.05 GHz centre
Output at 1 dB compression as publishedat least 39 dBm
Output at 1 dB compression in watts, calculated7.94 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 8 dB
Drain efficiency as publishedat least 30 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated31 dBm, 1.26 W
DC input at compression, calculated26.47 W
Drain current at compression, calculated2.65 A at 10 V
Dissipation at compression, calculated18.53 W
Dissipation if efficiency reaches 40 per cent, calculated11.91 W
Output per 100 MHz of the band, calculated0.72 W
Load voltage at compression into 50 ohm, calculated19.93 V RMS, 28.18 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour one step below at 36 dBmHXC40035, 35 per cent, 1.14 A
Neighbour one step above at 41 dBmHXC40037, 30 per cent, 4.20 A

Eighteen and a half watts of heat is the limit on the chassis

Every other figure on this page is easy to meet. The one that decides whether the product ships is 18.53 W of dissipation in a package that the vendor does not dimension in text. A base plate of 40 by 40 by 5 mm copper, bolted to a fin stack with a thin thermal interface, is a normal answer at this level. A ceramic substrate with vias is the other answer when the board is the heatsink.

The rail is the second constraint. At 2.65 A a linear post regulator from 28 V would burn 47.7 W, which is more than the amplifier. Even from 12 V it would burn 5.3 W. A buck converter is the only sensible arrangement, and it has to be quiet enough that its switching residue does not land in the 1.1 GHz window at a level the compression point can see.

Because the data sheet carries no thermal resistance figure, a buyer cannot compute a junction temperature from this page alone. What we do in that case is ask the factory for the number and, where it is not available, work from the case temperature a sample reaches at rated output in the customer laboratory rather than guess a junction figure.

The band in a point to point link

The window from 8.5 to 9.6 GHz covers the low half of X band. In fixed service it maps to short haul links that were planned at 8.5 to 9 GHz and to telemetry and command channels allocated through the band. In radar it covers the maritime navigation band near 9.3 to 9.5 GHz, which is why a part on this window turns up in radar front ends built for harbour and coastal work.

For a link, 7.94 W at the antenna port is a middle figure that suits a 20 to 40 km path with a 600 mm dish. For a radar, what matters is peak power and duty, and this part is specified for continuous wave only, so a pulsed radar built around it has to stay inside the average dissipation that 18.53 W at the compression point implies. A ten per cent duty cycle at 31 dBm of drive is a normal starting point but the vendor does not characterise it, so it has to be qualified.

Where a plan needs more than 7.94 W, the 41 dBm member is the next step and it takes 2.0 W of drive, which means the driver also changes. Where the plan needs less and the rail is tighter, the 36 dBm member keeps the heat under eight watts. That is the role of a three decibel ladder: it lets the heatsink and the driver be chosen against the actual link budget rather than against a round number.

The ladder at 8.5 to 9.6 GHz around HXC40036

Four parts sit on this window and they are not four versions of one thing. The 36 dBm member is the efficient one, the 39 dBm member is the balanced one, the 41 dBm member is the one that needs a real thermal path, and the 44 dBm member is a saturation only device with a seven decibel gain and no published efficiency. Between the 39 and the 41 dBm members the output rises by 4.65 W and the heat by 10.85 W, so the second step costs more per decibel than the first.

Two of this part in a balanced pair would deliver 10.94 W if the combining loss is ignored, which is 1.4 dB more than a single 41 dBm member, at 37 W of heat against 29.38 W. The pair is better when a failure has to be tolerated, because the unit keeps half its output. The single larger part is better on heat and on parts count.

The RF power transistor cross reference lays out the step between these members side by side, and the RF component sourcing page carries the questions we ask before quoting a complete line up.

Questions buyers ask before ordering HXC40036

Is the 30 per cent efficiency a minimum or a typical? The index prints it as a minimum figure, the same way it prints the output and the gain. The three are stated at the same operating point, the 1 dB compression point, so they describe one condition rather than three.

What happens above compression? The saturation column is empty, so no number is offered. Continuous wave operation above compression raises the dissipation and lowers the margin, and without a saturation figure there is nothing to size that against.

Can two of these be combined? Yes, and the pair delivers about 10.94 W before combining loss. The price is two bias circuits and a hybrid, and 37 W of heat in the same footprint.

How do we start? Send the output, the duty, the ambient at the base plate and the rail available. We will confirm which member of the group matches, quote from the current factory schedule, and ship a sample with the factory test data at the band edges and centre.