Contact Us

HXC40033

Brand: Hisiwell
Hisiwell HXC40033 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40033 — Discrete & Power Semiconductors | Superb Automation

HXC40033

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40033 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40033: twelve and a half watts at 32 per cent at 7.7 to 8.5 GHz

The HXC40033 is the third member of the 7.7 to 8.5 GHz group in the Hisiwell gallium arsenide internally matched family, and it is the first part in the range where efficiency drops to 32 per cent. The window is 799 MHz, 9.88 per cent fractional at an 8.1 GHz centre. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 7.7 to 8.5 GHz, saturation output not printed, output at 1 dB compression at least 41 dBm, gain at least 8 dB, drain efficiency at least 32 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

41 dBm at compression is 12.59 W. On 10 V the DC input is 39.34 W, the drain current 3.93 A and the heat 26.75 W. The drive is 2.00 W at 33 dBm, well above the 1.26 W the lower band part with the same output needs, because the gain has fallen to 8 dB and the power has to be pushed in harder.

Compared with the 12.59 W part on the 6.4 to 7.2 GHz window, this one costs 6.21 W more dissipation and 0.42 W more drive for the same radio frequency output. That is the price of the higher band at this power level, and it is the reason the X band part of the family is usually specified one member lower than the equivalent C band requirement.

The parameter rows Hisiwell publishes for HXC40033

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range7.7 to 8.5 GHz
Bandwidth, calculated799 MHz, 9.88 per cent fractional at an 8.1 GHz centre
Output at 1 dB compression as publishedat least 41 dBm
Output at 1 dB compression in watts, calculated12.59 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 8 dB
Drain efficiency as publishedat least 32 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated33 dBm, 2.00 W
DC input at compression, calculated39.34 W
Drain current at compression, calculated3.93 A at 10 V
Dissipation at compression, calculated26.75 W
Dissipation if efficiency reaches 50 per cent, calculated12.59 W
Output per 100 MHz of the band, calculated1.57 W
Load voltage at compression into 50 ohm, calculated25.09 V RMS, 35.48 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour one step below at 39 dBmHXC40032, 35 per cent, 2.27 A
Neighbour one step above at 44 dBmHXC40034, 32 per cent, 7.85 A

Thirty two per cent is a thermal specification as much as an electrical one

At 32 per cent, 12.59 W of radio frequency costs 39.34 W of DC input and leaves 26.75 W as heat. A part at 40 per cent would need 31.48 W of DC input for the same output and leave 18.89 W, so the eight point difference in efficiency is 7.86 W of extra heat in the same footprint. At X band that difference is usually the difference between a plate that works and a plate that saturates.

Backing off makes it worse rather than better on this part. At six decibels of back off the output falls to 3.16 W while the DC input stays in the high twenties, so the efficiency falls under 15 per cent and nearly all of the DC input leaves as heat. A system that specifies 3 W average from this part should be using the 39 dBm member instead, not this one backed off.

There is one arrangement where this part still makes sense at low average power, and that is a pulsed system. A radar with a two per cent duty cycle dissipates 0.54 W on average at full peak power, which any plate can carry. The catch is that the vendor publishes no transient thermal impedance, so the junction rise during the pulse has to be measured rather than calculated from the steady state figure.

The 3.93 A drain current, the 39.34 W of DC input and the 26.75 W of heat all point the same way: a copper spreader under the package, a cold plate or a heat pipe, and an interface material with a real thickness specification. A thermal pad on a laminate will not carry this load at 8 GHz, where the same laminate also has to hold the match.

X band at twelve watts in a real system

At 12.59 W this member suits a radar exciter, a medium range data link or the driver stage of a larger X band transmitter. In the driver role the part runs near compression and the published figures apply. In the final stage of a link with dense modulation it runs backed off, and the thermal penalty described above becomes the dominant mechanical constraint.

For a radar the pulse duty cycle is what saves the part, because the average dissipation is the peak dissipation times the duty. The vendor publishes no transient thermal impedance, so the only sound method is to measure the case temperature rise over a burst and confirm it settles below the limit. Continuous wave rating is a conservative starting point, not an obstacle.

Linearity again has no published data, and at X band the phase behaviour under drive matters as much as the amplitude behaviour. A two tone measurement plus a phase measurement on the first article is the only way to know whether the part suits a shaped waveform.

Mismatch at 12.59 W reflects about 1.4 W into the output at a 2 to 1 load. An isolator is standard at this power on X band, and it also protects the driver from a reflected signal that would otherwise reach back through the match.

Where the X band ladder turns

The ladder runs 36, 39, 41 and 44 dBm with efficiency at 40, 35, 32 and 32 per cent. This part and the 44 dBm member share the same efficiency, so the step between them is purely power and current: 7.85 A against 3.93 A, and 53.38 W of heat against 26.75 W.

The practical reading is that this part is the last one that fits a single board without a cold plate, and the 44 dBm member is the first that needs one. Our RF component sourcing page covers how we compare a single larger device against a pair at this power, and the supplier quality audit page describes what a second source qualification involves on a part with no published curve.

Questions buyers ask before ordering HXC40033

Why is the efficiency lower than the C band part at the same output? The match and the die both lose more at 8.1 GHz than at 6.8 GHz. The vendor prints 32 per cent here against 38 per cent on the lower band, and that is a real difference in the datasheet, not a measurement artefact.

Can it run 6 dB backed off for a dense modulation? It can, but the efficiency falls under 15 per cent and the DC input stays in the high twenties. For that requirement the 39 dBm member is the better choice.

What drive does it need? 33 dBm, which is 2.00 W. A driver rated at 36 dBm covers it with margin, and that margin is worth having because the gain falls at the band edges.

How do we start? Send the output required, the modulation, the ambient at the base plate and the rail available. We will confirm the family member that fits, quote from the current factory schedule and ship a sample with measured output, gain and efficiency across the band.