Contact Us

HXC40032

Brand: Hisiwell
Hisiwell HXC40032 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40032 — Discrete & Power Semiconductors | Superb Automation

HXC40032

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40032 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40032: eight watts at 35 per cent at 7.7 to 8.5 GHz

The HXC40032 is the second member of the 7.7 to 8.5 GHz group in the Hisiwell gallium arsenide internally matched family, and it doubles the output of the entry part while keeping the same 8 dB of gain. The window is 799 MHz, 9.88 per cent fractional at an 8.1 GHz centre. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 7.7 to 8.5 GHz, saturation output not printed, output at 1 dB compression at least 39 dBm, gain at least 8 dB, drain efficiency at least 35 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

39 dBm at compression is 7.94 W. On 10 V the DC input is 22.70 W, the drain current 2.27 A and the heat 14.75 W. The drive is 1.26 W at 31 dBm, three decibels more than the entry part needs for half the output, and that rise is entirely the gain staying at 8 dB while the power doubles.

This is the member where a single stage, single device X band transmitter becomes practical: 8 W at the antenna is enough for a short range data link or a radar exciter, and the thermal load of 14.75 W still fits an aluminium enclosure with a proper interface.

The parameter rows Hisiwell publishes for HXC40032

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range7.7 to 8.5 GHz
Bandwidth, calculated799 MHz, 9.88 per cent fractional at an 8.1 GHz centre
Output at 1 dB compression as publishedat least 39 dBm
Output at 1 dB compression in watts, calculated7.94 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 8 dB
Drain efficiency as publishedat least 35 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated31 dBm, 1.26 W
DC input at compression, calculated22.70 W
Drain current at compression, calculated2.27 A at 10 V
Dissipation at compression, calculated14.75 W
Dissipation if efficiency reaches 50 per cent, calculated7.94 W
Output per 100 MHz of the band, calculated0.99 W
Load voltage at compression into 50 ohm, calculated19.93 V RMS, 28.18 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour one step below at 36 dBmHXC40031, 40 per cent, 1.00 A
Neighbour one step above at 41 dBmHXC40033, 32 per cent, 3.93 A

Fourteen watts of heat at X band

At 35 per cent, 7.94 W of radio frequency costs 22.70 W of DC input and leaves 14.75 W as heat. That is the same dissipation as the 8 W member on the 6.4 to 7.2 GHz window, which makes the two parts interchangeable from a thermal point of view and lets a product family share a plate across the bands.

The 2.27 A drain current is inside a single wide track with vias, and the choke has to carry it under modulation without saturating. Above 2 A the bias feed starts to interact with the match at 8 GHz: a quarter wavelength of track between the decoupling and the drain pad is enough to turn a stable device into an oscillator, so the decoupling belongs within a few millimetres of the package.

The supply side deserves the same attention as the plate. At 2.27 A a 10 V converter with 200 milliohms of output impedance drops 0.45 V at the current peak, which is 4.5 per cent of the rail and about 0.4 dB of output. The drop is not constant under modulation, so the envelope gains a slow amplitude tilt that shows up as spectral regrowth in a dense modulation link. Short, wide supply routing and bulk capacitance at the package solve both the drop and the tilt.

With no thermal resistance figure published, the safe method is to measure case temperature at full drive across the band on the first article and hold the base plate below 70 C. At 14.75 W that usually means a 2 to 3 mm aluminium plate with a thin interface, or a copper spreader under the package.

X band in a real system

The 7.7 to 8.5 GHz window covers the upper part of the X band satellite downlink, the 7.9 to 8.4 GHz military tactical links and the low edge of the radar band. In a data link the modulation is often constant envelope and the part runs near compression, so the published 39 dBm and 35 per cent apply directly.

In a radar exciter the requirement moves to phase stability and pulse fidelity, neither of which the vendor documents. A gallium arsenide amplifier of this class is usually well behaved in that respect, but the measurement still has to be made, because the matching network inside the package is part of the phase response.

For a satellite downlink the signal is shaped and the back off is set by adjacent channel limits. With no two tone data published, the first article measurement is the only basis, and it should be done at 7.7 and 8.5 GHz as well as at the centre, since the gain and the match both move at the edges.

Mismatch at 7.94 W reflects about 0.88 W into the output at a 2 to 1 load. A circulator is cheap at this power and worth having in a link that can see an open antenna.

The band edges are where the margin goes. The window ends at 8.5 GHz and the flatness figure is a whole band number, so a channel plan that uses the top 100 MHz should be measured there rather than at the centre. The same applies at 7.7 GHz, where the match is at the other end of its tolerance and the gain is at the low side of the published minimum.

Where it sits on the X band ladder

The 7.7 to 8.5 GHz group runs 36, 39, 41 and 44 dBm, and the efficiency falls from 40 to 35 to 32 to 32 per cent as the power rises. This part is the last member that still shows a reasonable thermal load, and the step up to 41 dBm costs 12 W more dissipation for 4.65 W more output.

That makes this the practical ceiling for a sealed enclosure without a cold plate. Our guide to choosing an RF amplifier sets out how the thermal path and the power step interact, and the incoming inspection plan page covers what we check on a delivered lot at this value.

Questions buyers ask before ordering HXC40032

Can it be used at 8.5 GHz? The window ends at 8.5 GHz and the flatness figure covers the whole band, so it works at the edge with 0.8 dB less output. Beyond 8.5 GHz the next group starts at 8.5 GHz and covers to 9.6 GHz.

Does the 8 dB gain allow a single driver stage? A 34 dBm gain block gives 3 dB of headroom over the 31 dBm requirement, which is enough for a short interstage path. A filter between the stages eats into that quickly.

Is the efficiency quoted at saturation? No. The published row is at 1 dB compression and the saturation column is slashed. Backing off for a dense modulation drops the efficiency into the twenties.

How do we start? Send the output required, the modulation, the ambient at the base plate and the rail available. We will confirm the family member that fits, quote from the current factory schedule and ship a sample with measured output, gain and efficiency across the band.