HXC40027
Product Specifications
HXC40027
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40027 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40027: four watts at 40 per cent at 6.4 to 7.2 GHz
The HXC40027 opens the 6.4 to 7.2 GHz group in the Hisiwell gallium arsenide internally matched family and it is the most efficient part in the whole range at 40 per cent. The window is 799 MHz wide, 11.76 per cent fractional at a 6.8 GHz centre, and it covers the upper C band fixed service channels and the 6.7 to 7.1 GHz links used by government and military systems. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 6.4 to 7.2 GHz, saturation output not printed, output at 1 dB compression at least 36 dBm, gain at least 9 dB, drain efficiency at least 40 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.
36 dBm at compression is 3.98 W. On 10 V the DC input is 9.95 W, the drain current 1.00 A and the heat 5.97 W. The drive is 0.50 W at 27 dBm, which a single packaged gain block can supply, so a two stage driver chain is enough for a 4 W transmitter at this band.
The gain is 9 dB rather than the 10 dB the 5.8 to 6.7 GHz group carries, and that single decibel is the honest sign of the higher band: the matching network and the die both give up a little as frequency rises. It changes the driver requirement, not the output.
The parameter rows Hisiwell publishes for HXC40027
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 6.4 to 7.2 GHz |
| Bandwidth, calculated | 799 MHz, 11.76 per cent fractional at a 6.8 GHz centre |
| Output at 1 dB compression as published | at least 36 dBm |
| Output at 1 dB compression in watts, calculated | 3.98 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 9 dB |
| Drain efficiency as published | at least 40 per cent |
| Drain voltage | 10 V |
| Input and output impedance, as stated by the vendor | 50 ohm at both ports |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 27 dBm, 0.50 W |
| DC input at compression, calculated | 9.95 W |
| Drain current at compression, calculated | 1.00 A at 10 V |
| Dissipation at compression, calculated | 5.97 W |
| Dissipation if efficiency reaches 50 per cent, calculated | 3.98 W |
| Output per 100 MHz of the band, calculated | 0.50 W |
| Load voltage at compression into 50 ohm, calculated | 14.11 V RMS, 19.95 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text, the product page carries one outline image |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour on the same window at 39 dBm | HXC40028, 35 per cent, 2.27 A |
| Neighbour on the lower 5.8 to 6.7 GHz window at 36 dBm | HXC40023, 40 per cent, 10 dB gain |
Forty per cent is the highest figure in the family
At 40 per cent, 3.98 W of radio frequency costs 9.95 W of DC input and leaves 5.97 W as heat. That is a part a modest aluminium plate can cool, and it is the reason this member is used as a driver stage for the larger parts on the same window: a 44 dBm part needs 3.16 W of drive, which this device delivers while consuming 9.95 W and dissipating under 6 W at its own compression point.
The 1.00 A drain current is a convenient number rather than a limit. It sets the feed width, the choke rating and the bulk capacitance, and it sits comfortably inside what a small buck converter can hold at 10 V. The lead inductance budget is the same as on the larger members, because the frequency is the same and the current is only smaller, not absent.
The efficiency figure is quoted at compression and it falls when the part is backed off, as it does on every gallium arsenide device in this class. The fall is gentler at this power because the quiescent current is a smaller share of the total, so a driver stage run 6 dB back sits nearer 30 per cent than the 20 per cent a 30 W part would show.
Six point four to seven point two gigahertz in a real system
The band carries fixed service point to point links in the upper C band, the 6.7 to 7.1 GHz government allocation and the feeder links that pair with C band satellites. In a point to point link the modulation is often 1024 QAM or higher, and the linearity requirement, not the output, decides how far the part can be pushed. With no two tone data published, a measured adjacent channel figure on the first article is the only basis for a link budget that assumes a particular back off.
In a driver role the requirement is different: the part runs near compression, the signal may be constant envelope, and the published 36 dBm and 40 per cent are usable as printed. There the only correction is the temperature one, since compression moves down as the case warms and the vendor publishes no curve for it.
For a 4 W transmitter in a portable terminal, the 5.97 W of dissipation at compression is small enough that the enclosure itself can be the heatsink, provided the base is aluminium rather than plated plastic. That is the practical difference between this member and the 39 dBm one above it, which needs a real thermal path at 14.75 W.
Mismatch tolerance is the same as the rest of the family: an internally matched 50 ohm part at 3.98 W reflects about 0.44 W back into the die at a 2 to 1 load. A circulator is still good practice, but at this power a mismatch is survivable, which is why driver stages are often built without one while final stages are not.
The 6.4 to 7.2 GHz ladder
Four members cover this window: 36, 39, 41 and 44 dBm at compression, all with 9 dB of gain, all on 10 V, and all at 799 MHz of bandwidth. The steps are 3, 2 and 3 dB, which is a tighter ladder than the 4 dB step on the lower band, so the choice between members is more often made on heat and drive than on raw power.
This part is the entry point and the natural driver for the 44 dBm member. Our RF component sourcing page describes how we qualify a driver and a final stage as a pair, and the defence grade components page covers the traceability questions that come with the 6.7 to 7.1 GHz allocation.
Questions buyers ask before ordering HXC40027
Is 40 per cent reachable in a real board? It is a device figure at compression with a 10 V rail. Board losses and the driver current are outside it, so a 4 W stage measured at the connector will look nearer 35 per cent overall.
What drive does it need? 27 dBm, which is 0.50 W. A gain block rated at 30 dBm output covers it with 3 dB of headroom, and that headroom is worth keeping because drive level drifts with temperature.
Does it need a negative gate supply? The vendor does not publish the bias arrangement in the table. Gallium arsenide depletion mode parts normally need one, and the product page does not contradict that, so plan for a negative rail and confirm on the first article.
How do we start? Send the output required, the modulation, the ambient at the base plate and the rail available. We will confirm the family member that fits, quote from the current factory schedule and ship a sample with measured output, gain and efficiency across the band.