Contact Us

HXC40026

Brand: Hisiwell
Hisiwell HXC40026 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40026 — Discrete & Power Semiconductors | Superb Automation

HXC40026

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40026 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40026: thirty one watts at 35 per cent on the 5.8 to 6.7 GHz window

The HXC40026 is the largest member of the Hisiwell gallium arsenide internally matched family on the 5.8 to 6.7 GHz window, and it is the part a C band uplink terminal reaches for when the antenna has already been made as large as the site allows. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 5.8 to 6.7 GHz, saturation output not printed, output at 1 dB compression at least 45 dBm, gain at least 10 dB, drain efficiency at least 35 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

45 dBm at compression is 31.62 W. On 10 V that means 90.35 W of DC input, a drain current of 9.04 A and 58.73 W of heat to move out of a package whose thermal resistance the vendor does not publish. The drive is 3.16 W at 35 dBm, which is not a small signal task and is the first thing to check in a line up that was written around a 41 dBm part.

The band is the same 900 MHz, 14.40 per cent fractional at a 6.25 GHz centre, so the match and the flatness behave exactly as they do on the smaller members. What changes is the current, and with it every copper decision on the board.

The parameter rows Hisiwell publishes for HXC40026

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range5.8 to 6.7 GHz
Bandwidth, calculated900 MHz, 14.40 per cent fractional at a 6.25 GHz centre
Output at 1 dB compression as publishedat least 45 dBm
Output at 1 dB compression in watts, calculated31.62 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 10 dB
Drain efficiency as publishedat least 35 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated35 dBm, 3.16 W
DC input at compression, calculated90.35 W
Drain current at compression, calculated9.04 A at 10 V
Dissipation at compression, calculated58.73 W
Dissipation if efficiency reaches 50 per cent, calculated31.62 W
Output per 100 MHz of the band, calculated3.51 W
Load voltage at compression into 50 ohm, calculated39.76 V RMS, 56.23 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour one step below at 41 dBmHXC40025, 38 per cent, 3.31 A
Neighbour on the adjacent 5.3 to 5.9 GHz window at 45 dBmHXC40022, 35 per cent

Fifty eight watts of heat and no thermal resistance figure

At 35 per cent, 31.62 W of radio frequency costs 90.35 W of DC input and leaves 58.73 W as heat. This is the number that decides whether the part can be used at all, not the output. A copper block, a cold plate or a heat pipe is required, and the mounting surface has to be flat enough that the interface material is a film rather than a gap filler. With no junction to case figure published, the practical route is to measure case temperature on the first article at full drive across the band and hold it below 75 C with margin.

The efficiency also has a second effect that is easy to miss. At 35 per cent the drain current moves by more than 20 per cent between the backed off and the compression operating points, so the supply has to hold 10 V over a 9 A step without ringing. Bulk capacitance close to the drain, and a converter with enough loop bandwidth to answer a modulated envelope, are both part of making this part work.

If the requirement is less heat, two 41 dBm parts combined dissipate 41.08 W for 25.18 W of output, against 58.73 W for 31.62 W here. The combined route puts the heat in two places and adds 0.4 to 0.6 dB of combiner loss, which on a 4 dB power step is a poor trade unless the mechanical arrangement forces it. One part, one thermal path is the cleaner answer above 30 W.

The uplink case at 5.8 to 6.7 GHz

The commercial C band uplink at 5.925 to 6.425 GHz is the classic home for a part like this, and the upper end of the window matters for terminals that have to shift channel when the operator changes the plan. In a fixed earth station the transmit power is set by the link budget and by the operator's power spectral density limit, so the useful operating point is several decibels below compression even though the part is rated at it.

Backing off costs efficiency, and at this power the loss of efficiency is felt as heat rather than as current draw. A terminal specified at 31.62 W compression and run at 25 W carries roughly the same DC input as it would at compression, because the current barely falls, so the cold plate has to be sized for the full power case regardless of the backed off set point.

Linearity data is absent from the vendor material, and at this power level that is the first thing a systems engineer asks about. Nothing here substitutes for a two tone measurement on the first article, and nothing in the index table describes the behaviour under a multicarrier envelope.

For mismatch, at 31.62 W a 2 to 1 load reflects about 3.5 W back into the output, which is a real thermal load on the die. An isolator rated for 40 W forward and 10 W reverse, with a terminated load, is the usual protection in an uplink chain that also has to survive a disconnected antenna.

Where it sits in the family

The 5.8 to 6.7 GHz group runs 36, 39, 41 and 45 dBm, and this is the top of it. The step from 41 to 45 dBm costs 2.5 times the current and 38.19 W of extra dissipation for 19.03 W of extra output, which is why the 41 dBm member carries most of the volume and this one is reserved for the cases where the link cannot be closed otherwise.

The other route to 31 W is a pair of 41 dBm parts. Our guide to choosing an RF amplifier sets out how to compare a single larger device against a combined pair on heat, drive and combining loss, and the amplifier cross reference covers the module level alternatives on the same band.

Questions buyers ask before ordering HXC40026

What drive does it need? At least 35 dBm, which is 3.16 W. A 41 dBm part driven by the same source would be running 4 dB below its own compression, so the driver usually has to change when a line up moves up to this part.

Is the saturation power higher? The vendor prints a slash in that column, so the only guaranteed figure is 45 dBm at 1 dB compression. Do not plan a system around a saturation number that does not exist in print.

Can it run pulsed at higher peak power? The mode column says continuous wave and there is no pulse rating, no duty cycle figure and no transient thermal impedance curve in the vendor material. A pulsed application would need measurement, not extrapolation.

How do we start? Send the required output at the antenna, the modulation, the ambient at the base plate and the rail available. We will confirm the member of the family that fits, quote from the current factory schedule and ship a sample with measured output, gain and efficiency across the band.