Contact Us

HXC40013

Brand: Hisiwell
Hisiwell HXC40013 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40013 — Discrete & Power Semiconductors | Superb Automation

HXC40013

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40013 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40013: twelve and a half watts at compression on 4.4 to 5.0 GHz

The HXC40013 is a gallium arsenide internally matched power transistor from Hisiwell on the same 4.4 to 5.0 GHz window as the HXC40011 and HXC40012. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 4.4 to 5 GHz, saturation output not printed, output at 1 dB compression at least 41 dBm, gain at least 10 dB, drain efficiency at least 38 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

41 dBm at compression is 12.59 W. The interesting number on this part is not the power, it is the efficiency. At 38 per cent it is the highest figure in the 4.4 to 5 GHz group apart from the smaller HXC40011, and it comes with a higher output than either of the parts below it. On 10 V that combination brings the drain current to 3.31 A, which is a quantity a normal buck converter can serve without a special supply.

Flatness of plus or minus 0.8 dB across 600 MHz is the vendor figure for the whole family, so the response shape is not what separates these parts. What separates them is where on the ladder the line up needs its gain and its watts to sit.

The parameter rows Hisiwell publishes for HXC40013

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range4.4 to 5.0 GHz
Bandwidth, calculated600 MHz, 12.77 per cent fractional at a 4.7 GHz centre
Output at 1 dB compression as publishedat least 41 dBm
Output at 1 dB compression in watts, calculated12.59 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 10 dB
Drain efficiency as publishedat least 38 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated31 dBm, 1.26 W
DC input at compression, calculated33.13 W
Drain current at compression, calculated3.31 A at 10 V
Dissipation at compression, calculated20.54 W
Dissipation if efficiency reaches 50 per cent, calculated12.59 W
Output per 100 MHz of the band, calculated2.10 W
Load voltage at compression into 50 ohm, calculated25.09 V RMS, 35.48 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour on the same band at 41 dBm with 38 per cent efficiencythis part, HXC40013
Neighbour on the same band at 39 dBmHXC40012, 35 per cent

Thirty eight per cent at twelve and a half watts

Efficiency is the figure that decides whether a transmitter fits in the box it has been given. At 38 per cent, 12.59 W of radio frequency costs 33.13 W of DC input, of which 20.54 W leaves as heat. A part at 25 per cent would need 50 W of DC input for the same output, and would leave 37.8 W of heat in the same footprint. The difference between those two cases is often the difference between a heatsink and a cold plate.

The vendor figure is quoted at compression, and that is the important qualification. Back the part off six decibels for a multicarrier signal and the efficiency falls into the twenties, because the DC current does not fall in step with the drive. A transmitter specified from the published number alone will run hot in the backed off condition, which is the condition most fielded equipment actually sits in.

The 3.31 A drain current sets the feed. Two or three parallel bond wires or a wide track with vias at both ends are usual at this current, and the choke has to carry 3.31 A without saturating at the peak of the modulation. A 10 V rail at 3.5 A is also the point where the supply routing starts to matter for stability, because the lead inductance from the converter to the drain becomes a real impedance at the band.

Four point four to five gigahertz in a real system

The band is used for satellite links in the extended C band receive windows, for the 4.9 GHz public safety allocation, for fixed wireless and point to point links, and for military data links that sit deliberately away from the dense commercial channels. A 600 MHz match covers all of those at once, which is why a single part can serve a product family with different channel plans.

In a satellite receive chain the signal arrives with a shaped envelope and the transmitter at the other end is not under the buyer's control. Linearity beyond compression is therefore the open question, and the vendor publishes nothing on it. On a gallium arsenide part of this class the third order intercept typically sits 8 to 10 dB above the compression point, and that estimate is not a specification. A two tone measurement on the first article settles it.

In a data link the modulation is usually constant envelope and the part runs near compression, which is the case the published row describes. There the 41 dBm and the 38 per cent are both usable as they stand, and the only correction is the temperature one: compression moves down with case temperature and the vendor publishes no curve for it, so the system should carry a decibel of margin if the base plate runs above 60 C.

For load mismatch, an internally matched part at 50 ohm is more forgiving than a discrete device with an external network, but not immune. At 12.59 W a 2 to 1 mismatch reflects about 1.4 W back into the output, which the die has to absorb. A circulator with a terminated load is the standard answer, and on a continuous wave part at this power it is not optional in a product that has to survive an antenna fault.

The ladder at 4.4 to 5.0 GHz

Four members share this window: 36, 39, 41 and 45 dBm at compression, all on 10 V and all with 10 dB of gain. The two decibel gap between the HXC40012 and this part is the narrowest step in the family, and it is best read as a linearity margin rather than as a power step. A 41 dBm device run at 39 dBm has two decibels of headroom before compression, which is enough to keep a shaped signal clean without adding a second stage.

The next step up is the HXC40014 at 45 dBm, which quadruples the output and takes the current to about 9 A. Between 41 and 45 dBm most transmitters put a driver and a final stage rather than one larger device, because the 3.16 W of drive that the 45 dBm part needs has to come from somewhere with its own thermal path. Our RF component sourcing page sets out the questions we ask before quoting a line up of that shape, and the cross reference shows the step from one member to the next on the same window.

Questions buyers ask before ordering HXC40013

Is the efficiency quoted at saturation? No. The published row is at 1 dB compression, and the saturation column carries a slash for this part. Expect a lower figure at a backed off operating point.

Can the part run on 12 V? No. The drain rail is 10 V in the vendor table. A 12 V bus has to be regulated down, and the drop has to be accounted for at 3.31 A.

What is the gain flatness worth in a line up? The plus or minus 0.8 dB is a band edge figure for one stage. Two stages inherit the sum unless the driver is flatter, so a fixed level plan should budget 1.2 dB for a pair.

How do we start? Send the output at the antenna, the modulation, the ambient at the base plate and the rail available. We will confirm which member of the family fits, quote from the current factory schedule and ship a sample with measured output, gain and efficiency across the band.