HXC40011
Product Specifications
HXC40011
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40011 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40011: four watts at compression on 4.4 to 5.0 GHz
The HXC40011 is a gallium arsenide internally matched power transistor covering 4.4 to 5.0 GHz. Hisiwell builds it with in-plane matching synthesis and thin film hybrid integration and specifies 50 ohm at both ports. The index row reads 4.4 to 5.0 GHz, saturation output not printed, output at 1 dB compression at least 36 dBm, gain at least 10 dB, drain efficiency at least 40 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.
36 dBm at compression is 3.98 W. This is the smallest part in the GaAs family in this batch and it is quoted at compression rather than at saturation, so it is a linear part first and a power part second. Ten decibels of gain means 398 mW of drive, which a single gain block can supply.
The band is 600 MHz wide, 12.77 per cent fractional at a 4.7 GHz centre. It covers the 4.4 to 5.0 GHz window used for fixed wireless access, part of the 5G n79 allocation between 4.4 and 5.0 GHz, C band satellite links, and a number of defence and scientific allocations. A four watt part on this window is the transmit block for a small cell, a customer premises terminal or a short range link.
40 per cent efficiency at compression gives 9.95 W of DC input, which is 995 mA at 10 V, and 5.97 W of heat. Those are modest figures and they make this the easiest member of the family to bias and to cool. A part of this size can share a 10 V rail with the rest of a radio without a dedicated converter.
The parameter rows Hisiwell publishes for HXC40011
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 4.4 to 5.0 GHz |
| Bandwidth, calculated | 600 MHz, 12.77 per cent fractional at a 4.7 GHz centre |
| Output at 1 dB compression as published | at least 36 dBm |
| Output at 1 dB compression in watts, calculated | 3.98 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 10 dB |
| Drain efficiency as published | at least 40 per cent |
| Drain voltage | 10 V |
| Input and output impedance | 50 ohm, matched |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 26 dBm, 398 mW |
| DC input at compression, calculated | 9.95 W |
| Drain current at compression, calculated | 995 mA at 10 V |
| Dissipation at compression, calculated | 5.97 W |
| Dissipation if efficiency reaches 60 per cent, calculated | 2.65 W |
| Output per 100 MHz of the band, calculated | 0.664 W |
| Load voltage at compression into 50 ohm, calculated | 14.11 V RMS, 19.95 V peak |
| Estimated linear output at 6 dB back off, calculated | 1.00 W, 30 dBm |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour on the same rail at 39 dBm compression on the same band | HXC40012, 10 dB gain |
Four watts in a 5G or fixed wireless terminal
The 4.4 to 5.0 GHz window is one of the allocations being used for 5G in several countries and for fixed wireless access in many more. A four watt linear part with ten decibels of gain and a 10 V rail fits a customer premises terminal or a small cell, where the output at the antenna is a few hundred milliwatts and the amplifier is backed off for the modulation.
A 5G waveform has a peak to average ratio of eight to ten decibels. At that back off this part delivers between 400 mW and 1 W, and the efficiency falls from 40 per cent to about 12 to 15 per cent. The thermal load drops with it, so a four watt part backed off to 500 mW is a cool part, and the pressure moves from heat to linearity.
Linearity is the figure the vendor does not publish. Error vector magnitude at a given back off, adjacent channel leakage ratio and third order intercept all have to be measured on a sample. A part with 40 per cent efficiency at compression is not a class A device, and its linearity at eight decibels of back off will be adequate for many waveforms and marginal for the most demanding ones.
The alternative for a linear application is to run a larger part at a deeper back off. The HXC40014 covers the same band at 45 dBm compression with 10 dB of gain, so it can deliver this part's full output at 9 dB of back off with far better linearity. That is the standard trade and it costs efficiency and cost.
Ten decibels of gain and a simple chain
10 dB of gain with 398 mW of drive is the simplest arrangement in the family. A single gain block of 26 dBm output, driven from a 10 dBm exciter, feeds this part and the chain has 36 dB of total gain. That is a two stage transmitter that can be built on a small board with one bias circuit per stage.
Low gain also means the part is tolerant of a poor source match and of a load that moves. A 2:1 mismatch at the output reflects 11 per cent of the power, and a part quoted at compression with 6 W of dissipation can absorb that reflection for a short time at least. The vendor publishes no mismatch tolerance and no protection recommendation, so a circulator and a load remain the safe arrangement in any product that may see an open antenna.
The published flatness of plus or minus 0.8 dB across 600 MHz is a useful promise for a wideband terminal. It means the level plan does not have to be reworked per channel, and a product that hops across the band can keep one gain setting.
At 995 mA the bias current is small enough that a linear regulator can be used instead of a switching converter, which removes a source of spurious tones from the board. The loss in the regulator is 10 V minus the drain voltage times the current, and at this current that is a watt or two, which is affordable in a small cell that already has a fan or a large case.
Where 4.4 to 5.0 GHz is used
Fixed wireless access uses 4.4 to 5.0 GHz in many regions for point to multipoint links, and the same window carries part of the 5G n79 allocation. C band satellite links use nearby spectrum, and several defence systems use this window for telemetry and for short range radar.
In a fixed wireless terminal the transmit power is low and the antenna is directional. A four watt part backed off to 500 mW is a good match for a 30 dBi dish that closes a link over several kilometres. The 10 V rail is easy to generate from a 48 V or a 12 V feed, and the current is small enough that power over Ethernet is within reach for a low duty product.
In a defence system the same part may serve a data link where the waveform is constant envelope and the part runs near compression. That application uses the published figures directly and needs no linearity data beyond what the system measures on the first article.
Our RF component sourcing page explains how we qualify a part for a terminal application and what we ask for before a quotation covers a production schedule.
Comparing HXC40011 with its neighbours
The same band carries four larger members. The HXC40012 is 39 dBm compression with 10 dB of gain, the HXC40013 is 41 dBm, the HXC40014 is 45 dBm, and all three keep the 10 V rail and the same body. The step from this part to the HXC40012 is three decibels of output for the same drive and the same gain, so a system that needs more margin moves up one row rather than to another family.
Above this band the HXC40019 to HXC40022 cover 5.3 to 5.9 GHz at 36 to 45 dBm compression with 10 dB of gain, and below it the HXC40007 covers 3.1 to 3.5 GHz at 42 dBm saturation with 10.5 dB. The family is laid out in contiguous windows with a fixed gain per window, which makes a multi-band product a matter of choosing one member per window and one driver for all of them.
A part quoted at compression cannot be compared column to column with a part quoted at saturation, and the difference is about a decibel. Our one stop RF supply page explains how we keep both conventions straight when a BOM carries parts from several families.
Questions buyers ask before ordering HXC40011
Is 36 dBm saturation or compression? It is 1 dB compression. The saturation column carries a slash. For a saturated application the real output is about a decibel higher, and for a linear one the compression figure is the number that matters.
Is there a data sheet? No. The vendor publishes an index row and a product page with the same electrical figures and the 50 ohm port impedance. There are no curves, no scattering parameters, no thermal data and no package drawing.
What has to be on the purchase order? The band, the 10 V rail, the continuous wave mode and the quantity. No orderable addendum, marking code or packing column is published, so reel size and moisture level come from the factory quotation.
How do we start? Send the band, the waveform, the output required at the antenna connector and the rail. We will confirm the fit, quote from the current factory schedule and ship a sample with measured output at compression, gain at both band edges and a two tone record if the waveform is not constant envelope.