Contact Us

HX30370P

Brand: Hisiwell
Hisiwell HX30370P is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX30370P — Discrete & Power Semiconductors | Superb Automation

HX30370P

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HX30370P from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HX30370P: 370 W on the row and 251 W on the page, 1.69 dB of difference on one part

The HX30370P is a gallium nitride power transistor on the 48 V side of the shelf, covering 2 to 3 GHz with a 370 W row, 18 dB of gain and 78 per cent efficiency. The page describes the same part as a high efficiency, high gain transistor available in a flanged package and operating from a 48 to 50 V supply, and then publishes three parameter lines: a maximum saturated power of 251 W, a best drain efficiency of 82.7 per cent and a linear gain of 18.8 dB.

370 W and 251 W are 1.69 dB apart. That is not a rounding difference and it is not a typo that can be shrugged off: at 2 to 3 GHz it is the difference between a 55.7 dBm and a 54.0 dBm stage, which is a different driver, a different combiner and a different heatsink. Both numbers come from the same vendor and neither is dated, so the buyer has to pick one and say why.

The honest reading is that 370 W is the class figure used on the index and 251 W is the measured point the vendor chose to publish, most likely at a rail or a drive condition that is not stated. Until the factory states the condition, a quotation should use the lower figure and a contract should name the point.

The HX30370P rows as the vendor publishes them

Part classGallium nitride power transistor, flanged
Frequency range, index row2 to 3 GHz
Window width, calculated1 GHz
Band ratio, calculated1.5 to 1
Saturation output, index row370 W, 55.68 dBm
Maximum saturated power, product page251 W, 54.00 dBm
Gap between the two, calculated1.69 dB
Output per gigahertz of window, calculated370 W
Gain, index row18 dB
Linear gain, product page18.8 dB
Drive at 18 dB and 370 W, calculated5.86 W, 37.68 dBm
Drive at 18.8 dB and 251 W, calculated3.32 W, 35.21 dBm
Drain efficiency, index row78 per cent
Best drain efficiency, product page82.7 per cent
DC input at 370 W and 78 per cent, calculated474.4 W
Drain current in that case at 48 V, calculated9.88 A
Heat in that case, calculated104.4 W
DC input at 251 W and 82.7 per cent, calculated303.5 W
Drain current in that case at 48 V, calculated6.32 A
Heat in that case, calculated52.5 W
Supply, product page48 to 50 V
Supply, index row48 V
Load voltage at 370 W into 50 ohm, calculated136.0 V rms, 192.4 V peak
Peak against a 48 V rail, calculated4.01 times
Peak at a 2 to 1 mismatch, calculated384.7 V, 8.01 times the rail
Mode, index rowCW
Compression point for the rated figureNot published
Test condition behind the 251 W lineNot published
Package drawing and screw patternNot published
Thermal resistanceNot published
Load impedance and load pullNot published
Data sheetNo document linked from the page
Orderable addendumNone published
Packing quantity and moisture levelNot published
Applications listedRF and microwave systems

Voltage stress is the constraint on a 3 GHz part at this power

370 W into 50 ohm is 136.0 V rms and 192.4 V peak, which is 4.01 times a 48 V rail. At a 2 to 1 mismatch the peak rises to 384.7 V, which is 8.01 times the rail. That figure is the one to put in front of the person choosing the output capacitors, the isolator and the connector, because a part that looks like a 48 V device at the supply is a 385 V device at the output.

The supply question rides alongside. The page offers 48 to 50 V, the row says 48 V, and the difference is 4 per cent of rail which does not matter for the output voltage but does matter for the bias sequencing and for the current limit. A 48 V rail with a 10 per cent tolerance reaches 52.8 V, and every volt above the rated rail lands on the drain of a device whose breakdown margin is not published.

The mismatch case is also where the 1.69 dB between the two power figures stops being an academic question. A stage sized at 370 W and delivering 251 W is running further back from its rated point, which is safer. A stage sized at 251 W and expected to deliver 370 W is running past it, and in a mismatch the voltage swing is the first thing that fails.

The two efficiencies and the two heats

78 per cent at 370 W gives 474.4 W of DC input, 9.88 A at 48 V and 104.4 W of heat. 82.7 per cent at 251 W gives 303.5 W of DC input, 6.32 A and 52.5 W of heat. The second case is half the heat of the first, not because the device is better but because it is delivering two thirds of the power.

For a buyer the two cases bracket the heatsink. Whichever figure the amplifier is built to, the thermal path has to hold the junction at a temperature the vendor has not published a limit for. That is the real gap in this page: not the missing curves, but the missing thermal resistance, which is what turns a heat figure in watts into a case temperature in degrees.

Where the amplifier is forced air cooled and the case can be held near 70 degrees, a 104 W heat load is a manageable flange and a moderate heatsink. Where the case runs at 90 degrees in a sealed enclosure, the same 104 W is a different problem, and the only number that would settle it is the one the page does not carry.

Where the HX30370P sits on the 48 V shelf

The group around it is dense. The HX27240F is 240 W over 1.8 to 2.7 GHz with 18 dB and 80 per cent, 1.88 dB below this row on a window that reaches lower and stops lower. The HX38300P is 300 W over 2 to 3.8 GHz with 19 dB and 75 per cent, 0.91 dB below it on a window that is 0.8 GHz wider. The HX2040370P is 370 W over 2 to 4 GHz with 18 dB and 70 per cent, the same power on twice the window.

Read as a set, the four rows trade window for power and efficiency. The HX30370P has the highest published efficiency of the four at 78 per cent and the narrowest window at 1 GHz. Where the application sits between 2 and 3 GHz and the efficiency matters, it is the best of the four on paper. Where the band edge is 3.5 GHz or 3.8 GHz, the HX38300P covers it for 0.91 dB. The spread with the drive figure for each row is on the RF power transistor cross reference page.

What an order for the HX30370P has to state, and what it cannot yet

The part publishes no compression point for the rated figure, no test condition behind the 251 W line, no thermal resistance, no package drawing, no load pull and no data sheet, and carries no orderable addendum, packing column or moisture level. The purchase order has to carry the part number, the window, the rail (48 or 50 V, stated), the operating point that matters (saturated or backed off), the flange, the quantity and the incoming test.

The incoming gate should measure the saturated output at the rail the system will use, and it should record the drain current at that point, because the current is the figure that reveals whether a delivered device matches the 78 per cent row or the 82.7 per cent page line. The incoming inspection plan page sets out the record, and where the amplifier also needs its driver, its isolator and its passives against one date, the one stop RF supply page covers the consolidated buy.

Questions buyers ask about the HX30370P

Is it 370 W or 251 W? The row says 370 W and the page says 251 W maximum saturated, 1.69 dB apart. Quote the lower figure and ask the factory for the condition behind the higher one.

Can it run at 50 V? The page allows 48 to 50 V and the row says 48 V. A regulated 48 V rail is the safer specification, because no breakdown margin is published.

What is the heat load? 104 W at the 370 W row point and 52.5 W at the 251 W page point. Both need a thermal resistance that the page does not publish.

Is the package flanged? Yes, the page says flanged, and this is one of the few rows on the shelf where the package type is stated rather than inferred from the suffix.