HX280R48HS
Product Specifications
HX280R48HS
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HX280R48HS from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HX280R48HS: four watts to eight gigahertz in a five by four millimetre body
The HX280R48HS is an unmatched gallium nitride HEMT from Hisiwell for applications up to 8 GHz, packaged in what the vendor calls a thermally enhanced tiny MMS outline of five by four millimetres. The family index prints 4 W of saturation output on a 28 V rail, and the mode column reads 7GHz rather than continuous wave or pulse. The product page states the 4 W and the 8 GHz limit, lists wireless communication infrastructure, wideband amplifier, EMC testing and ISM as the applications, and prints no parameter table at all: no gain, no efficiency, no impedance and no document.
Four watts is 36.02 dBm. Because no gain is published, the drive cannot be calculated from the vendor data; it has to come from a measurement or from the factory. That single missing column is the difference between a part a buyer can budget in an afternoon and one that needs a week of bench time.
The body is the reason to look at this member. A five by four millimetre surface mount package at 8 GHz is a different proposition from a flanged transistor: it reflows with the rest of the board, it does not need a bolted joint, and it can sit inside a module rather than beside it.
That body is what makes the part interesting for an EMC amplifier or an instrument front end, where the eight gigahertz span and the small outline matter more than the four watts. It is also what makes it interesting for an unmanned aerial vehicle data link, where the whole transmitter has to fit on a board the size of a business card.
What is published and what is missing for HX280R48HS
| Part class | Unmatched gallium nitride HEMT |
| Frequency range, product page | Up to 8 GHz |
| Frequency column, family index | DC to 8 |
| Saturation output | 4 W |
| Saturation output in dBm, calculated | 36.02 dBm |
| Power gain | Not published, the index prints a slash in that column |
| Drain efficiency | Not published, the index prints a slash in that column |
| Drive power at saturation | Cannot be calculated without a gain figure |
| DC input at 40 per cent efficiency, calculated | 10.0 W, 0.36 A, 6.0 W of heat |
| DC input at 50 per cent efficiency, calculated | 8.0 W, 0.29 A, 4.0 W of heat |
| Drain rail | 28 V |
| Mode column in the index | 7GHz, which is a note on the band rather than a mode |
| Body | MMS, five by four millimetres, thermally enhanced |
| Mounting | Surface mount, reflow |
| Matching | Unmatched, external network on the customer board |
| Load voltage at 50 ohm, calculated | 14.1 V RMS, 20.0 V peak |
| Thermal resistance, junction to case | Not published |
| Gate bias point and quiescent current | Not published |
| Operating and storage temperature | Not published |
| Orderable addendum, marking and packing | Not published |
| Data sheet | Not linked from the product page |
| Family siblings, same body and band | HX280018H at 10 W, HX280028H at 20 W |
Four watts with no gain figure: how a buyer proceeds
At 4 W the heat is small whatever the efficiency. At 40 per cent the DC input is 10 W, the current 0.36 A and the heat 6 W; at 50 per cent it is 8 W, 0.29 A and 4 W. None of those numbers is a thermal problem in a five by four millimetre body on a board with copper underneath.
What is missing is the gain, and gain decides the line up. A 12 dB part needs 0.25 W of drive; an 18 dB part needs 63 mW. Without the figure, a buyer either allocates a driver that covers both cases or asks the factory before committing. The honest answer is that no gain figure is published and the request has to be made.
The mode column reading 7GHz is also worth a question. Every other member of the same table prints CW or Pulse in that column; this one prints a frequency note, which suggests the row was edited by hand and that the original mode entry was lost. A part with an unclear mode entry should not be committed to a pulsed application without a written confirmation.
The 8 GHz limit is stated twice, once in the index and once in the product page sentence about frequencies up to 8 GHz. Above that the vendor explicitly gives no performance guarantee, which is unusual to see in writing and useful: it tells the buyer where the band stops rather than leaving it to a measurement.
The three small members of the eight gigahertz family
| HX280R48HS | 4 W | MMS five by four | 36.02 dBm | Reference point |
| HX280018H | 10 W | Body not printed | 40.00 dBm | 3.98 dB above |
| HX280028H | 20 W | Body not printed | 43.01 dBm | 6.99 dB above |
| HXN50333 | 4 W | Bare die family row | 36.02 dBm | Same power, different part series |
| HXN50264 | 10 W | Bare die family row | 40.00 dBm | Same power as HX280018H |
| HXN50265 | 20 W | Bare die family row | 43.01 dBm | Same power as HX280028H |
The ladder is four, ten and twenty watts, each three to four decibels apart, and the same three powers appear twice in the catalogue: once in the HX280 series with HX280R48HS carrying an MMS body, and once in the HXN503 series. Whether the two series are the same die in different packages is not stated anywhere in the documents, and it is a question worth putting to the factory before a bill of materials is frozen.
For a buyer the practical choice is the body. Four watts in a five by four millimetre reflow part is a module level component; twenty watts in the same band is a different thermal job and probably a different body, which the index does not print.
The RF power transistor cross reference lists the series and the powers, and the RF component sourcing page covers how a wideband module is assembled from these parts.
Board notes for a five by four millimetre wideband part
A reflow part at 8 GHz lives or dies on the ground. The thermal pad is the RF ground and the heat path at the same time, so the via field under the body is part of the match rather than a thermal detail, and a sparse field shows up as gain loss at the top of the band.
The gate bias is unpublished, so the negative rail and the clamp are built to be adjustable. On a small body the bias network is often larger than the transistor, and placing it on the same layer as the output match is the usual mistake.
The match covers eight gigahertz. Above 6 GHz the parasitic of the package and the board dominate, so the network is measured on the first article rather than computed from a model that does not exist.
Four watts does not need a heatsink, but it does need copper. The vias, the pad and the ground plane are the thermal path, and the case temperature is measured because no junction to case figure is published.
Questions buyers ask about HX280R48HS
What is the gain? Not published. The index prints a slash in the gain column and the product page has no parameter table, so the figure has to come from the factory or from a measurement on a sample.
What is the efficiency? Also not published. The heat figures on this page are calculated from assumed efficiencies of 40 and 50 per cent and are labelled as such.
Is the mode continuous wave or pulsed? The column reads 7GHz, which is a frequency note rather than a mode. Treat the mode as unconfirmed until the factory answers in writing.
Is there a data sheet? The product page links none, unlike the DC to 6 GHz members which each carry a PDF. That is the first thing to ask for.
How do we start? Send the band, the output at the connector, the drive available and the body you want. We will get the gain and the mode confirmed, quote from the factory schedule, and ship a sample for a bench measurement.