Contact Us

REF198ESZ-REEL

Brand: Analog Devices
Analog Devices REF198ESZ-REEL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

REF198ESZ-REEL — Analog & Mixed-Signal ICs | Superb Automation

REF198ESZ-REEL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The REF198ESZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

REF198ESZ-REEL: 4.096 V, 2 mV, and the 32 LSB It Costs a 16 Bit Converter

The REF198ESZ-REEL is a 4.096 V precision reference in an 8-lead SO package, with 2 mV maximum initial error, a 5 ppm per degree C maximum temperature coefficient, 45 uA maximum supply current and 30 mA of output drive. The 4.096 V value is chosen because it is exactly 2 to the power 12 millivolts, so a 12 bit converter on this reference reads one LSB as 1 mV and a 16 bit converter reads one LSB as 62.5 uV. That arithmetic convenience is the reason the voltage exists at all.

Two millivolts is 32 LSB

At 4.096 V one LSB of a 16 bit converter is 62.5 uV, so 2 mV of reference error is 32 LSB. Add the temperature term: 5 ppm per degree C over the 85 degree industrial span is 425 ppm, which is 1.74 mV, and the worst case sum is 3.74 mV, or 913 ppm. A 16 bit absolute accuracy claim built on this reference therefore fails by a factor of about 60 without calibration, and the converter's own linearity is not the limiting term. The reference is still an excellent choice for a 12 bit system, where 2 mV is 2 LSB.

Output voltage4.096 V
Initial accuracyPlus or minus 2 mV maximum, 488 ppm
Temperature coefficient5 ppm per degree C maximum
Drift over 85 degrees425 ppm, 1.74 mV
Worst case total3.74 mV, 913 ppm, 32 LSB at 16 bits
Supply current45 uA maximum, 394 mAh over a year
Sleep current15 uA maximum
Output drive30 mA, 122.9 mW at 4.096 V
Load and line regulation4 ppm per mA, 4 ppm per V

Low dropout and sleep mode

The part is a low dropout reference, holding its output from a supply as little as 100 mV above 4.096 V, which means it can run from a 5 V rail that is at the bottom of its tolerance without a pre regulator. The sleep pin takes a low TTL or CMOS level and drops the output, reducing supply current to 15 uA, which is a genuine off state for a battery instrument rather than a low power mode. Forty five microamps is 394 mAh over a year, so a product that sleeps for most of its life needs the sleep pin wired to the controller rather than tied high.

The 30 mA output drive is what makes the part usable as a reference for a bridge or a sensor excitation as well as for a converter, and the 4 ppm per mA load regulation means a 10 mA change moves the output by 40 ppm, 164 uV. On a 12 bit converter that is a fraction of an LSB, and on a 16 bit one it is 2.6 LSB, which is the same message as the initial accuracy.

Where it fits

12 bit data acquisition, industrial 4 to 20 mA transmitters, portable instruments, smart sensors and any board where a 4.096 V full scale is wanted. The family also includes 2.048 V, 2.5 V, 3.0 V, 3.3 V, 4.5 V and 5.0 V members, so the full scale can be matched to the sensor span rather than fixed by the reference that happened to be in stock.

Two questions buyers ask

Is a 5 V reference better than 4.096 V for a 16 bit converter?
It gives a larger LSB but the same absolute error, so the accuracy in volts does not improve and the accuracy in LSB improves only in proportion to the full scale. The 4.096 V value is chosen for the 1 mV per LSB arithmetic at 12 bits, not for accuracy at 16.

Can it drive a bridge directly?
Yes, up to 30 mA, which covers most 350 ohm bridges at 4 V. The load regulation of 4 ppm per mA then becomes the error term to check, and a 20 mA bridge current moves the excitation by 80 ppm, which is 328 uV and appears directly in the measurement.

Supply and matching

The ESZ code is the 8-lead SO, tape and reel, lead free, and the grades within the family differ in initial accuracy rather than in voltage. The family is on the analog mixed signal ICs page, converter and reference pairs are compared in the ADC and DAC cross reference, and precision front end requirements for medical instruments are covered under medical device components.

Request Quote — In Stock, 100% New & Original, Full Warranty