Contact Us

REF195ESZ-REEL

Brand: Analog Devices
Analog Devices REF195ESZ-REEL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

REF195ESZ-REEL — Analog & Mixed-Signal ICs | Superb Automation

REF195ESZ-REEL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The REF195ESZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

REF195ESZ-REEL: A 5 V Reference That Holds 2 mV at 25 C and Drifts 3.1 mV Over Temperature

The REF195ESZ-REEL is a 5.0 V precision voltage reference in an 8-lead SOIC. Initial accuracy is plus or minus 2 mV maximum, the temperature coefficient is 5 ppm per degree C maximum, supply current is 45 uA maximum and 15 uA in sleep mode, output current is 30 mA, load regulation is 4 ppm per mA and line regulation is 4 ppm per volt. Dropout is low enough that the reference can run from a supply only 100 mV above its output, and the output has short circuit protection. The part is specified from minus 40 C to 85 C with typical performance published to 125 C.

The two accuracy numbers are the whole story of this part, and they point in opposite directions. Initial accuracy of 2 mV looks excellent against a 5 V output, and the drift over the industrial range is larger than the initial error. A system that calibrates at 25 C and then reads a converter in a cabinet at 70 C is living on the drift term, not on the 2 mV.

Two millivolts is 400 ppm and the drift is 625 ppm over 125 degrees

Two millivolts on 5 V is 400 ppm. Five ppm per degree C over the 125 degree span from minus 40 C to 85 C is 625 ppm, which is 3.125 mV. Adding the two gives 5.125 mV of worst case error, so the drift is the larger term and the initial accuracy is the smaller one. At 16 bits on a 5 V range one LSB is 76.3 microvolts, so 2 mV is 26 LSB and 5.125 mV is 67 LSB.

That comparison is why a 16-bit system cannot take its absolute accuracy from a reference of this class without calibration. The reference is a good part; the arithmetic simply says that an uncalibrated 16-bit measurement over an industrial temperature range needs a better reference or a calibration step, and the same part is entirely adequate for a 12-bit system where one LSB is 1.22 mV.

Thirty milliamps of output current costs 120 ppm of load regulation

Load regulation of 4 ppm per mA at the full 30 mA output is 120 ppm, which is 600 microvolts. That is a third of the initial accuracy and it appears only when the reference is asked to supply current, so a reference that feeds a converter's reference pin draws microamps and a reference that feeds a bridge draws milliamps. The two cases are 4 ppm per mA apart per milliamp, and the load has to be known before the error budget is written.

Forty five microamps of supply current is 225 microwatts at 5 V, and over a year that is 394 mAh of charge. Sleep mode at 15 uA is 131.4 mAh over a year. For a loop powered instrument the sleep figure is the one that matters, and the output is turned off in that mode, which means the converter behind it has to be put to sleep as well.

One hundred millivolts of dropout is what allows a 5 V rail to feed a 5 V reference

The reference can run from a supply 100 mV above its output, so a 5 V reference can be fed from a 5 V rail that is at 5.1 V or above. That is a narrow margin: a 5 V rail at plus or minus 5 percent reaches 4.75 V, which is below the output, and the reference drops out. A system that wants a 5 V reference from a 5 V rail needs a rail that is regulated high, or a 5.5 V or 6 V supply, or the 4.096 V member of the family on the same rail.

Line regulation of 4 ppm per volt means a 1 V change at the input moves the output by 20 microvolts at 5 V. That is small, and it is the reason a reference of this class does not need a pre-regulator unless the input is noisy rather than merely inaccurate.

Function5.0 V series voltage reference, 8-lead SOIC
Initial accuracyPlus or minus 2 mV maximum, which is 400 ppm
Drift5 ppm per degree C maximum, 625 ppm or 3.125 mV over 125 degrees
Worst case total5.125 mV, 67 LSB at 16 bits on a 5 V range
Output current30 mA with 4 ppm per mA load regulation, 600 uV at full load
Supply current45 uA maximum, 225 uW at 5 V, 394 mAh over a year
Sleep15 uA maximum, output off, 131.4 mAh over a year
DropoutAbout 100 mV, so a 5 V rail at minus 5 percent cannot feed it
Line regulation4 ppm per volt, 20 uV per volt at 5 V
RangeSpecified minus 40 C to 85 C, typical data to 125 C

Two questions buyers ask

Can this run from the same 5 V rail it is referencing?
Only if the rail stays above 5.1 V. A 5 V rail at plus or minus 5 percent falls to 4.75 V, which is below the output, and the reference drops out of regulation. A 5.5 V rail, or a 4.096 V reference on the 5 V rail, is the arrangement that works.

Is the 2 mV figure the accuracy over temperature?
No. It is the initial accuracy at 25 C. Over the specified range the drift of 5 ppm per degree C adds 3.125 mV, so the total is 5.125 mV. A specification that quotes 2 mV over temperature is quoting the initial figure only.

Ordering and supply

The ESZ suffix is the 8-lead SOIC and REEL is tape and reel. The family is offered in several output voltages, and the order code has to match the voltage the board needs, because the members are not adjustable. The higher grade options in the family are distinguished by a suffix rather than by a different body.

We hold this reference for instrumentation and industrial builds. Start at the analog mixed signal ICs page, the ADC and DAC cross reference page is where a reference is matched to the converter it feeds, and medical device components covers the long life documentation a medical instrument needs for its analogue supply.

Request Quote — In Stock, 100% New & Original, Full Warranty