Contact Us

OP07DRZ-REEL7

Brand: Analog Devices
Analog Devices OP07DRZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

OP07DRZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

OP07DRZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The OP07DRZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

OP07DRZ-REEL7: 150 microvolts maximum offset at half the supply current of a standard OP07

The OP07DRZ-REEL7 is the low cost member of the OP07 family from Analog Devices, an ultralow offset amplifier built on the iPolar process. It holds a 150 microvolt maximum offset, plus or minus 1 nA of bias current, 130 dB of common mode and supply rejection, and runs at 1.1 mA typical, which the vendor puts at half the consumption of a standard OP07 without giving up bandwidth, slew rate or noise.

What the vendor publishes

ParameterValue
Offset150 microvolts maximum
Bias currentplus or minus 1 nA maximum
Rejection130 dB common mode and supply
Supply current1.1 mA typical
Supplyspecified from plus or minus 5 V to plus or minus 15 V
Stability80 degrees of phase margin
Temperature-40 to +125 C
Packages8 lead SOIC and 8 lead PDIP

150 microvolts against the signals people actually measure

On a 1 mV thermocouple the 150 microvolt maximum offset is 15 percent of the signal, which rules the part out of a bare thermocouple front end and puts it squarely in the 10 mV and above class. On a 10 V full scale the same 150 microvolts is 15 parts per million, or 96.5 dB, which is 16 bits. Both statements are true at once, and which one applies is a property of the signal, not of the amplifier.

130 dB of rejection, in microvolts

One hundred and thirty decibels is a ratio of about three million. Ten volts of common mode movement at the input therefore shows up as 3.16 microvolts of input referred error, and a 1 V step on the supply shows up as 0.316 microvolts. That is what makes the part usable in a 4 to 20 mA loop receiver, where the common mode sits well above the sense resistor and moves with the loop, and in instrumentation that shares a supply with switching circuitry.

Power, bias and the reason for 80 degrees

1.1 mA at plus or minus 15 V is 33 mW, low enough that an eight channel instrumentation amplifier bank does not need a thermal plan. Eighty degrees of phase margin is the figure behind the phrase easy to use: the part is stable at unity gain without external compensation, so a follower built from it does not oscillate on a first article. Bias current is the term to check against the source: 1 nA into 1 Mohm is 1 mV, which is 6.7 times the offset.

Two questions buyers ask

Is the D suffix the same grade as the OP07 the drawing names? The D is the low cost member of the family and the vendor quotes 150 microvolts maximum for it. A drawing that was written around a tighter grade has to be checked against that number before the part is substituted, because the suffix is where the grade lives.

Can it run from a single 5 V rail? The part is specified from plus or minus 5 V to plus or minus 15 V, so a single 5 V rail is outside the specified range. A single supply front end needs a different family, and the rail to rail output amplifiers are the usual answer.

SUPERB quotes the OP07DRZ-REEL7 against this row and confirms the grade and package before shipment. Amplifier alternatives are compared under amplifier cross reference, a same footprint check starts at pin to pin cross reference, and the category index is analog and mixed signal ICs.

Request Quote — In Stock, 100% New & Original, Full Warranty

OP07DRZ-REEL7: 150 uV Offset in an SOIC, and What the Drift Number Does to a Thermocouple

The OP07DRZ-REEL7 is the narrow SOIC member of the OP07D precision amplifier family, on a reel. The part is specified at 150 uV maximum offset voltage, 1.5 uV per degree C maximum drift, 1 nA maximum input bias current and 115 dB minimum common mode and supply rejection, with 1.1 mA of supply current and operation from plus or minus 4 V to plus or minus 18 V. It runs over minus 40 to plus 125 C, which is the extended industrial range rather than a commercial one, and it is the part that replaces older OP07 grades in new boards without changing the pinout.

Offset is a DC number, drift is the one that hurts

In a thermocouple channel the signal is tens of microvolts per degree, so 150 uV of offset is several degrees of apparent temperature and has to be removed by a calibration step. The drift is what makes that calibration age: 1.5 uV per degree C over a 100 C swing is 150 uV of movement, exactly the size of the offset that was just trimmed out. A channel that is trimmed at room temperature and then used in a cabinet that runs 40 C hotter has given back all of its initial accuracy, which is why the drift grade, not the offset grade, decides whether a channel needs a chopper amplifier instead.

Bias current into a high impedance source

The 1 nA maximum bias current is the figure that matters when the source impedance is high. Into a 10 kohm source it is 10 uV; into 1 Mohm it is 1 mV, which is seven times the offset limit and larger than most thermocouple signals. A thermocouple with a 1 Mohm bias resistor for open circuit detection therefore reads the resistor, not the junction, unless the bias current is accounted for. The same arithmetic applies to a strain bridge with a high resistance element and to a pH electrode, both of which appear in the applications list next to the part.

ItemPublished valueWhat it decides on a board
Offset150 uV maximumTrim step at room temperature
Drift1.5 uV per degree C maximumWhether trimming survives the cabinet
Bias current1 nA maximumError into a high impedance source
Rejection115 dB minimum, 130 dB typicalCommon mode from a bridge or thermocouple
Supplyplus or minus 4 V to plus or minus 18 V, 1.1 mAHeadroom and self heating
Package8-lead narrow SOIC, reelFootprint against the DIP version

Why the SOIC code matters in production

The family is offered in an 8-lead DIP and an 8-lead narrow SOIC, and this code is the SOIC on a reel, which is the version a pick and place line can actually use. The same die in the DIP body is a hand assembly part. A prototype built with the DIP and released to production with this code does not need a circuit change, but it does need a footprint change, and that is the step that gets missed when a board is copied from a bench build.

Where this part stops

At 150 uV of offset and 1.5 uV per degree C of drift, this is a precision amplifier, not an instrumentation amplifier. It has no internal gain network, so the gain resistors and their matching become part of the error budget, and a 0.1 percent pair with 25 ppm drift contributes more than the amplifier does at a gain of 100. A channel that needs the offset gone without a calibration step has to move to a chopper part, which is a different supply current and a different noise spectrum. Our amplifier cross reference page covers the family comparisons, the medical device components page covers the instrumentation channels, and the incoming inspection plan covers lot checks on reels.