Contact Us

LTC5596IDC#PBF

Brand: Analog Devices
Analog Devices LTC5596IDC#PBF is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTC5596IDC#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTC5596IDC#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTC5596IDC#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LTC5596: 35 dB of RMS Detection From 100 MHz to 40 GHz, and the Crest Factor Is the Point

The LTC5596 is an RMS power detector with a matched input from 100 MHz to 40 GHz, a 35 dB dynamic range held within 1 dB of error, a logarithmic slope of 29 mV per dB and a flat response within 1 dB from 200 MHz to 30 GHz. It measures average power rather than envelope peaks, which is what makes it read correctly on a modulated signal whose crest factor reaches 12 dB. A diode detector in the same position would read the peaks, and the reading would move every time the modulation changed.

RMS against peak is a measurement question, not a preference

A peak detector followed by a filter reads something between the peak and the average of a waveform, depending on the filter and on the modulation. For a continuous wave signal the difference does not matter. For a wideband signal with a 10 dB crest factor it is 10 dB of error, and for a signal whose crest factor changes with traffic it is an error that moves. An RMS detector squares, averages and takes the root, so its output tracks average power regardless of the envelope, and the 12 dB crest factor rating is the range over which that holds.

Values across the band

ParameterValueNote
Frequency range100 MHz to 40 GHzMatched input, no external matching network
Dynamic range35 dB within 1 dB of errorOutside that window the error grows quickly
Logarithmic slope29 mV per dBAn analogue to digital converter with 12 bits resolves 0.1 dB
FlatnessWithin 1 dB from 200 MHz to 30 GHzFrequency correction needed only at the extremes
Supply current30 mA at 3.3 V99 mW, with a shutdown mode below it
GradesI grade to +105 C, H grade to +125 C with guaranteed slope and interceptThe H grade is the one for a calibrated instrument

The filter capacitor sets the response time, and the response time sets the loop

The averaging bandwidth is set by a capacitor between the filter and output pins. A power meter wants a large capacitor, because the output ripple falls with the averaging time and the reading is stable to a tenth of a dB. An automatic gain control loop wants a small capacitor, because the loop has to follow a fading channel and a slow detector adds phase lag that turns into overshoot. The same part serves both, and the capacitor is the only difference, which is a useful thing to know when one board is derived from the other.

Thirty five dB is a window, not a range

The part measures 35 dB of input power within 1 dB of error, and the absolute window depends on frequency and on the grade. Below the bottom of the window the output flattens and stops responding; above the top it compresses. A transmit power control loop that expects the detector to report a 40 dB turn down range will find the bottom 5 dB missing, and the usual fix is a switched attenuator ahead of the detector rather than a different part.

Procurement and second source

Detector substitutions are difficult because the slope, the intercept and the frequency flatness all have to match for the calibration constants in the firmware to stay valid. A part with the same slope but a different intercept reads correctly after a single offset, and a part with a different slope needs a new calibration table in every unit already shipped. The RF component sourcing page lists the detector family, the amplifier cross reference page covers the gain stages that follow it, and receipt checks are described in the incoming inspection plan.