Contact Us

LTM8068EY#PBF

Brand: Analog Devices
Analog Devices LTM8068EY#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTM8068EY#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTM8068EY#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTM8068EY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LTM8068EY#PBF: 2 kVAC isolation with an LDO that burns 0.5 W of the budget

The LTM8068EY#PBF is an Analog Devices isolated flyback power module with a low noise linear post regulator in the same package. The module contains the switching controller, the power switches, the transformer, the LDO and the support components, so the board needs only input and output capacitors to finish the function. Isolation is rated at 2 kVAC and the part is recognised to UL60950 under file E464570. The input range is 3 V to 40 V. Output one is adjustable from 2.5 V to 18 V and delivers up to 450 mA at 24 V in and 5 V out; output two is the linear regulator, adjustable from 1.2 V to 18 V, and delivers up to 300 mA. Current mode control, programmable soft start and a user configurable undervoltage lockout are built in, and the body is a 9 mm by 11.25 mm by 4.92 mm BGA that can be placed on standard surface mount equipment. It is on the analog and mixed-signal IC line card.

Where the heat goes

Output one at 5 V and 450 mA is 2.25 W. Output two at 3.3 V and 300 mA is 0.99 W, and the LDO sits across the 1.7 V difference between the 5 V rail and the 3.3 V rail, so it dissipates 0.51 W. That single linear stage is 15.7 percent of the 3.24 W the module delivers, and it is heat inside a 101 sq mm package. A board that takes 12 V down to a 3.3 V logic rail through the LDO instead of through the flyback would put 2.6 W into the same body at 300 mA, which is the case that fails in a sealed enclosure.

ParameterVendor figureDerived figure
Isolation2 kVAC, UL60950 E464570reinforced barrier ratings come from the system standard
Input range3 V to 40 V24 V nominal with wide margin
Output one2.5 V to 18 V, 450 mA2.25 W at 5 V
Output two1.2 V to 18 V, 300 mA0.99 W at 3.3 V
LDO dissipationlinear, 1.7 V drop at 5 V in0.51 W, 15.7 percent of total output
Body9 mm by 11.25 mm by 4.92 mm101 sq mm of board, 4.92 mm tall
External partsinput and output capacitorsno transformer or opto to specify

450 mA is a condition, not a rating on its own

The 450 mA on output one is quoted at 24 V in and 5 V out. The same module delivers less current at 5 V in, because the input current needed for a given output power is higher and the internal switch and transformer losses rise. In a 24 V industrial system the full figure is available; in a 12 V system the derating curve in the datasheet applies, and in a 5 V system the part is close to its limit. Choosing this module for a 5 V input and expecting 2.25 W of output is the most common mismatch on this family.

Why the linear post regulator earns its place

  • A flyback output carries switching ripple at the converter frequency. The LDO after it removes that ripple, which is what an analog or sensor rail needs.
  • The LDO also gives a second, independent output voltage from one isolated module, so an isolated 5 V and an isolated 3.3 V come from one part instead of two converters.
  • Programmable soft start controls the input inrush, which matters when the module is fed from a long cable with limited current.
  • The user configurable UVLO prevents the module from starting on a slowly rising input and browning out repeatedly.

Questions buyers ask

Is 2 kVAC the same as 2 kV DC? No, the AC rating is the one that matters for a barrier, and the DC withstand in the datasheet is a different test. System standards such as IEC 60601 or IEC 61010 set the working voltage and the creepage that the module has to be used within.

Can both outputs be loaded at the same time? Yes, within the total power and the thermal limit of the package. The two current figures are individual maximums, not a simultaneous guarantee.

Isolated rails in patient-connected equipment are quoted with the barrier and the certificate together, and the parts we hold for that market are grouped under medical device components. The rest of the module family is on the power management cross reference page.

Request Quote — In Stock, 100% New & Original, Full Warranty