LTM8058IY#PBF
Product Specifications
LTM8058IY#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTM8058IY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
LTM8058IY: isolated 5 V with a quiet 3.3 V behind it, from -40 degrees
The LTM8058IY#PBF is the industrial code of the isolated flyback with an LDO post regulator, guaranteed over -40 to +125 degrees internal by test rather than by characterisation. Input is 3.1 V to 31 V, the isolated output is 2.5 V to 13 V at up to 440 mA, and the post regulator delivers 1.2 V to 12 V at up to 300 mA with 20 microvolts RMS of noise. The 2 kVAC barrier is recognised under UL60950, so the component side of an isolation argument is already made when the part goes on the drawing.
Published values
| Parameter | Value |
|---|---|
| Input range | 3.1 V to 31 V with BIAS tied to VIN |
| First output | 2.5 V to 13 V, up to 440 mA |
| Post regulator output | 1.2 V to 12 V, up to 300 mA |
| Sum rule | VIN plus VOUT1 limited to 36 V |
| Isolation | 2 kVAC, 3 kVDC test for one second, UL60950 file E464570 |
| Post regulator dropout | 0.43 V at 300 mA |
| Output noise | 20 microvolts RMS on the post regulator, 20 mV RMS on the flyback output |
| Quiescent current | 1 microamp with RUN at 0 V |
| RUN threshold | 1.18 V to 1.30 V rising |
| First output regulation | 1.7 percent line, 1.5 percent load |
| Package | 11.25 mm by 9 mm by 4.92 mm BGA, 1.1 g |
| Thermal | 23.2 degrees per watt to ambient, 5.8 to the board |
| Temperature grade | -40 to +125 degrees internal, guaranteed by test |
| Finish | SAC305 RoHS, tin lead version under the same device code |
A 24 V input, a 5 V isolated rail and a 3.3 V analogue rail
This is the configuration the part was built for. Twenty four volts in gives a 5 V first output with 6 V of margin against the 36 V sum rule, and the post regulator then drops 5 V to 3.3 V at up to 300 mA. The 1.7 V difference is 0.51 W at full load, which is the largest single term in the thermal budget and the reason a 300 mA load is a different problem from a 100 mA one.
At 100 mA the LDO dissipates 0.17 W and the whole module runs cool. At 300 mA the flyback plus the LDO together are close to 1 W, which through 23.2 degrees per watt is a 23 degree rise, acceptable at a 70 degree ambient and marginal at 100.
What the industrial guarantee actually buys
The I grade is tested over the full -40 to +125 degree window, which is stricter than the E grade, where the -40 degree end is assured by characterisation and correlation rather than by test. For a product that ships with a -40 degree operating claim and a customer who asks for evidence, the difference is the test data behind the claim.
The other reason to pick the industrial code is the tin lead option under the same order code family, which some defence and aerospace builds still require. Both finishes are MSL 3 with a 168 hour floor life.
Isolation, creepage and the LDO's reference
The post regulator's reference sits on the isolated side, so the whole quiet rail floats with VOUT minus. That is exactly what a floating sensor front end wants, and it is exactly what breaks if someone ties VOUT minus to chassis ground downstream. Keep the isolated return separate until the point where the system decides to reference it.
The 2 kVAC rating is a component withstand test, and the board still has to provide the clearance around the module. Follow the vendor's keep out on the package drawing rather than scaling it down to fit a denser board.
The pages that answer this most often are the power management cross reference for the family alternatives, medical device components for the acceptance test, and BOM shortage recovery for the case where a replacement has to be fitted before the next build.
Two questions buyers ask about the industrial code
Can the post regulator run with the flyback disabled? Yes. The LDO is powered from VOUT1 and the data sheet specifies its behaviour with RUN at 0 V, so an external 5 V can feed the first output and the LDO still regulates. That is useful when the isolated side is also fed from a backplane.
What is the input current with a shorted output? 30 mA, which is the flyback's protection behaving as a current limited source. A short does not destroy the module, but the rail collapses and the LDO output follows it down.