Contact Us

LTM8027IV#PBF

Brand: Analog Devices
Analog Devices LTM8027IV#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTM8027IV#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTM8027IV#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTM8027IV#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LTM8027IV#PBF: 60 V input, 4 A output and the thermal limit behind the number

The LTM8027IV#PBF is a 60 V, 4 A step-down power module in a 15 mm by 15 mm land grid array with an Au pad finish and an MSL 3 rating. It takes 4.5 V to 60 V in and delivers 2.5 V to 24 V out at up to 4 A, with the switching frequency set between 100 kHz and 500 kHz by one resistor. The controller, the power switches, the inductor and the support components sit inside the package, so what is left on the buyer's list is the bulk input and output capacitors, the adjust resistor, the frequency resistor and the soft-start capacitor. The I grade runs -40 C to 125 C at the junction.

Published values

ParameterValue
Input voltage4.5 V to 60 V, 7.5 V minimum to start
Output voltage2.5 V to 24 V, set by one resistor on ADJ
Output current4 A DC, quoted at 60 V in and 12 V out
Switching frequency100 kHz to 500 kHz, set by RT
Quiescent current39 mA typical into VIN at 48 V, no load
Shutdown current9 uA
Junction to ambient12.2 C/W, 3.6 C/W to case bottom
Package15 mm x 15 mm x 4.32 mm LGA, Au pads, MSL 3
Efficiencyup to 95 percent
Temperature range-40 C to 125 C, I grade

What the 4 A figure covers

The 4 A in the title is a DC output current at a stated condition, 60 V in and 12 V out, and it is the switch and inductor current that sets it rather than the package. At 48 V in and 12 V out the duty cycle is 25 percent, so at 400 kHz the high side switch is on for 625 ns of a 2.5 us period, which is comfortable. The same 4 A at 2.5 V out is a 4.17 percent duty cycle, which is 83 ns of on time at 500 kHz, and that is the corner where the module runs out of room. The data sheet carries no minimum on-time number, so the frequency a 2.5 V rail can hold comes from the recommended component table rather than from the electrical table.

Current is also not the only limit at the top of the input range. At 60 V in and 24 V out the duty cycle is 40 percent and the module is delivering 96 W, which is the heaviest point in the family. That is a heat question and not a current limit question, and it is the reason two buyers can order the same code and get different results on the bench.

Thermal headroom at a 125 C junction

The LGA body is quoted at 12.2 C/W junction to ambient, with 3.6 C/W to the case bottom being the path the board takes and 7.54 C/W to the board itself. At 48 V to 12 V and 4 A, a 95 percent figure puts 2.53 W inside the package, which is a 30.8 C rise, so a 125 C junction leaves about 94 C of ambient. At 24 V to 5 V and 4 A, 2.22 W at 90 percent is a 27.1 C rise and about 98 C of ambient.

The 24 V output row is the one that catches people. 60 V to 24 V at 4 A is 96 W out and 8.35 W of loss at 92 percent, which is a 102 C rise on 12.2 C/W. A 125 C junction then allows about 23 C of ambient, so a 24 V rail at full current is a forced-air or heat-sunk application, not a still-air one, even though the part is sold as a 4 A module.

I grade, E grade and MP grade

The ordering table gives LTM8027EV, LTM8027IV, LTM8027EY and LTM8027IY the same -40 C to 125 C window, and only the MP codes reach -55 C. The I suffix in this family does not buy temperature range over the E suffix. What it buys is the grade named on an approved vendor list, and a buyer who is quoted the I part for a wider window should be shown the table.

The pad finish follows the package and not the grade: the LGA carries Au pads under finish code e4 and the BGA carries SAC305 balls under e1. A board qualified on one body is not qualified on the other, because the land pattern, the standoff and the reflow profile all move with it, and the BGA stands 4.92 mm tall against 4.32 mm for the LGA.

When an order code in this family cannot be found, the power management cross reference lists what else does the same job, the ADI second source page covers what to check before a part is dropped into an existing board, and component lead time solutions is the route we take on a live shortage.

Two questions buyers ask

Is the 4 A rating available at every output voltage? No. The electrical table states 4 A at 60 V in and 12 V out. Low outputs are limited by on time at high frequency, and 24 V out is limited by 8.35 W of loss at full current. Both are measured on the bench before a rail is signed off.

Does the module need a separate bias supply? Not to start. The internal regulator runs from VIN above 7.5 V. Driving BIAS1 above 8.5 V from the output or an external rail shuts that regulator down, removes its dissipation and keeps the module running down to 4.5 V on VIN.