LTC6957IMS-3#PBF
Product Specifications
LTC6957IMS-3#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTC6957IMS-3#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTC6957IMS-3#PBF: The Tube Packing of a Low Noise CMOS Buffer, and Why That Matters at Last Time Buy
The LTC6957IMS-3#PBF is the CMOS in-phase member of the LTC6957 clock buffer family in a 12-lead MSOP, supplied in tubes rather than on tape and reel. Electrically it is the same part as the reeled order code: an input that accepts a sine wave or logic up to 2 V peak to peak, two in-phase CMOS outputs to 300 MHz, 3 ps typical skew, a 3.15 V to 3.45 V supply and a minus 40 C to 125 C range. The vendor lists the family as last time buy, which makes the packing suffix a purchasing question rather than a detail.
Packing decides how the part arrives at the line. A reel feeds an automated placement machine; a tube feeds a magazine that either fits the same feeder with an adapter or has to be emptied into a tray. On a family that is no longer being built, the packing that is left in the channel is often the packing nobody wanted, and that is the reel or the tube the buyer has to accept.
Tube or reel changes the handling step, not the part
The same die, the same body and the same electrical specification arrive in a different container. A line that runs tubes needs a stick feeder and a vibration setting, and a line that runs reels needs the tape width and the pocket pitch to match the feeder. Neither is a quality difference, and both are a production engineering task that has to be done before the first build rather than during it.
Moisture sensitivity is the same for both packings, so the bake and floor life rules do not change with the container. What changes is the quantity per container and therefore the number of times the line stops to reload: a tube holds far fewer parts than a reel, which on a high volume build is a line balance question and on a repair lot is irrelevant.
Last time buy is a quantity problem with a date on it
The family is at last time buy at the vendor. That means the parts that exist are the parts that will ever exist, and the order that covers the remaining production life of the product has to be placed while the stock is still in the channel. A clock buffer that adds 45 fs on the LVPECL option and a few hundred femtoseconds on the CMOS option is not a part that can be swapped for a different buffer without re-measuring the jitter of the whole clock tree.
The practical planning figure is the annual usage times the years the product stays in production, plus the attrition of the line and the repair pool. A buffer in a 12-lead MSOP is a small part with a long shelf life, so the stock is cheap to hold relative to the cost of a board revision, and the mistake to avoid is buying a single year of tubes and discovering the line has to be re-qualified for a different buffer in year two.
3.15 V to 3.45 V is tighter than the system rail specification
The supply window is 3.15 V to 3.45 V, which is plus or minus 4.5 percent around 3.3 V. A rail specified at plus or minus 5 percent reaches 3.135 V and 3.465 V and is outside the window at both ends, so the regulator has to be tighter than the system specification or a filter has to be placed at the buffer. The same window applies to every member of the family, so a board that has to change from the -3 to the -1 keeps its supply requirement and changes its termination.
The 3 ps skew is a typical figure and it is measured between the two outputs of one package. Two packages on the same board have their own skew, which is not specified, so a clock tree that needs matched edges across packages has to distribute from one package rather than from several.
| Function | Dual CMOS in-phase clock buffer and logic converter |
| Packing | Tubes, order code without the tape and reel suffix |
| Input | Sine wave or logic up to 2 V peak to peak, selectable input filtering |
| Frequency | Up to 300 MHz |
| Skew | 3 ps typical between outputs of one package |
| Supply | 3.15 V to 3.45 V, plus or minus 4.5 percent |
| Body | 12-lead MSOP, industrial grade, minus 40 C to 125 C |
| Family options | -1 LVPECL, -2 LVDS, -3 CMOS in phase, -4 CMOS complementary |
| Lifecycle | Last time buy at the vendor, quantity covers the remaining build |
| Handling | Stick feeder and vibration setting, or transfer to a tray |
Two questions buyers ask
Is the tube version electrically identical to the reel version?
Yes. The container is the only difference in the order code, and the electrical specification, the grade and the body are the same. The difference that matters is on the line: a tube has to be fed by a stick feeder, and the quantity per container is much smaller than a reel.
How much should be bought at last time buy?
The annual usage times the remaining production years, plus line attrition and a repair pool. The part is small and has a long shelf life, so the holding cost is low against the cost of re-qualifying a different buffer. The number to avoid is one year of stock on a product that runs for five.
Ordering and supply
The IMS suffix is the 12-lead MSOP on the industrial grade, the -3 is the CMOS in-phase output, and PBF is the lead free finish without the tape and reel suffix. The same part on tape and reel carries the TR prefix in the suffix, so the two order codes are one character apart and one line item apart.
We hold this family in both packings and quote from stock. The analog mixed signal ICs page lists what we carry, component lead time solutions describes how a last time buy is planned, and BOM shortage recovery is where a build that needs a tube today and a reel next quarter is worked out.
Request Quote — In Stock, 100% New & Original, Full Warranty