Contact Us

LTC4365IDDB-1#TRMPBF

Brand: Analog Devices
Analog Devices LTC4365IDDB-1#TRMPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTC4365IDDB-1#TRMPBF — Analog & Mixed-Signal ICs | Superb Automation

LTC4365IDDB-1#TRMPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTC4365IDDB-1#TRMPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LTC4365IDDB-1#TRMPBF: The Fast Recovery Variant, and the AC Blocking It Gives Up

The LTC4365IDDB-1#TRMPBF is the -1 variant of the overvoltage, undervoltage and reverse supply protection controller, in an 8-lead 3 mm by 2 mm DFN. It operates from 2.5 V to 34 V, withstands 60 V at the input, protects against a reverse supply down to minus 40 V, consumes 125 uA in normal operation and 10 uA in shutdown, sets the overvoltage and undervoltage thresholds from an external divider, and drives a pair of external N-channel MOSFETs from a charge pump so the devices can sit in the high side. It carries a fault output that reports the gate state, needs no input capacitor or transient suppressor for most applications, and is AEC-Q100 qualified. The suffix matters: this variant turns on 1 ms after a fault clears, where the plain LTC4365 takes 36 ms.

The two variants exist because the turn-on delay does two different jobs. In the plain part it debounces a live connection and blocks 50 Hz and 60 Hz AC, since a 36 ms window spans several mains half cycles. In this -1 variant it is short enough that the converter restarts almost immediately, which is what a system with a watchdog or a boot sequence needs. Neither behaviour is free: the -1 gives up the AC blocking to get there.

One millisecond does not block a mains half cycle

A 50 Hz half cycle is 10 ms and a 60 Hz half cycle is 8.33 ms. A 1 ms turn-on delay is one tenth of the shorter of those, so an AC source applied to the input will turn the FETs on during part of the negative half cycle and the protection that the plain part provides is not there. That is a deliberate trade, not a defect: the -1 is bought by equipment that never sees an AC adapter and does need to come back fast, and the plain part is bought by equipment that can be plugged into a transformer or a miswired harness.

The recovery ratio is 36 to 1. A rail that dips for a few milliseconds and returns leaves the plain part off for 36 ms after the dip, which plus the processor boot is a visible restart, while the -1 reconnects in 1 ms and the load may not even notice. In a 48 V telecom card or an automotive module that has to ride through a cranking event, that difference is the whole reason for the order code.

A hundred and twenty-five microamps at the top of the range

At 34 V the controller draws 125 uA, which is 4.25 mW, and the shutdown state at 10 uA is 87.6 mAh over a year. Those numbers exclude the threshold divider, which is usually the larger standing current in a tightly specified window: a divider that holds 1 percent of threshold accuracy at 34 V can easily draw more than the controller. The 34 V operating range against a 60 V withstand is the margin for the transient that arrives before the FETs turn off, and it is why an external clamp is not needed in most applications.

Reverse protection to minus 40 V is done by the external pair, with their sources joined, so the body diodes oppose each other and neither a reversed supply nor a negative transient finds a conducting path. The charge pump holds the gates above the input to keep the FETs on, and the external devices must have a threshold low enough for the pump at the lowest input voltage the system must pass.

Variant-1, 1 ms turn-on delay for fast recovery after a fault
Plain part36 ms, blocks 50 Hz and 60 Hz AC, 36 times slower to recover
AC blockingNot provided by this variant, 1 ms against an 8.33 ms half cycle at 60 Hz
Operating range2.5 V to 34 V, 60 V withstand
Reverse protectionMinus 40 V through back-to-back N-channel FETs
Current125 uA operating, 4.25 mW at 34 V, 10 uA shutdown, 87.6 mAh over a year
ThresholdsOvervoltage and undervoltage from an external divider
DriveCharge pump for high side N-channel MOSFETs
StatusFault output reports gate low, shutdown or out of window
Package and qualification8-lead DFN 3 mm by 2 mm, AEC-Q100

Two questions buyers ask

Why would anyone want the slower plain part?
Because 36 ms blocks AC. Equipment that can be connected to a transformer output, a miswired harness or a source that is not DC needs the FETs to stay off through a half cycle, and a 1 ms window does not do that. If the input is guaranteed DC, the -1 gives a much faster restart for the same board area.

Does the 1 ms delay still debounce a hot plug?
It debounces contact bounce, which lasts microseconds to a few milliseconds, and it is long enough for the divider and the charge pump to settle. What it does not cover is an AC input or a slow ramp, so a connector that can be inserted into a live AC-coupled harness belongs on the plain part.

Ordering and supply

The IDDB suffix is the 3 mm by 2 mm DFN, the -1 before it is the fast recovery variant, and TRMPBF is tape and reel, lead free. The plain part in the same body has no -1 in the order code, so the two are one character apart and behave differently at power-up. The automotive qualification is a separate suffix again.

We source this family for production and for repair lots. Start at the analog mixed signal ICs family page, compare a candidate against the power management cross reference, and where a protection controller is being swapped on a board that is already built, BOM shortage recovery sets out how the delay, the withstand and the reverse rating are checked before the socket is.

Request Quote — In Stock, 100% New & Original, Full Warranty