Contact Us

LTC1446IS8#TRPBF

Brand: Analog Devices
Analog Devices LTC1446IS8#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTC1446IS8#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LTC1446IS8#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTC1446IS8#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LTC1446IS8#TRPBF: Two 12-Bit DACs in an SO-8, and a 1 mV Step That Sets the Resolution

The LTC1446IS8#TRPBF holds two 12-bit voltage output converters in an 8-lead SOIC, complete with a rail-to-rail output amplifier, an internal reference and a three-wire cascadable serial interface. Full scale is 4.095 V from a single 4.5 V to 5.5 V supply, so one code is 0.9998 mV. Maximum differential nonlinearity is 0.5 LSB, settling to plus or minus 0.5 LSB takes 14 us, the interface accepts a 500 kHz update rate, a Schmitt trigger on the clock input allows a direct optocoupler interface, power-on reset clears both outputs to 0 V, and no external components are needed at all. Supply current is 1000 uA typical at 5 V. The LTC1446L is the same converter with a 2.5 V full scale from a 2.7 V supply and 650 uA, and it is not the same part on a purchase order even though the pinout matches.

This is the converter chosen when a control loop needs two setpoints, the board has 8 pins of space and nobody wants to add an external reference. The internal reference is the reason the package is that small, and it is also the reason the full scale is a fixed 4.095 V rather than the rail.

The interface runs at 500 kHz and the converter settles in 14 us

Those two numbers are not the same rate. Fourteen microseconds is 71.4 kHz, so a controller that clocks codes in at the full 500 kHz interface rate is asking for an output that has not arrived yet. At 500 kHz a new code lands every 2 us, which is one seventh of the settling time, so the output is always chasing a value that has already changed. Where the loop can tolerate that the DAC behaves as a low pass filter with a corner near 11 kHz and the effective resolution falls below 12 bits; where it cannot, the update rate has to be held to 71 kHz or lower.

The 1 mV step is the other number to read. A 12-bit converter on a 4.095 V span resolves 1 mV, so a setpoint that has to be held to 100 uV cannot be met by this part at any update rate, and a setpoint that needs 10 mV of resolution has four codes of margin per step. That arithmetic decides the application far more than the linearity does, because 0.5 LSB of DNL is 0.012 percent of full scale and is invisible next to a 1 mV step.

ResolutionTwo 12-bit voltage output DACs
Full scale4.095 V from the internal reference, 1 LSB is 0.9998 mV
Linearity0.5 LSB maximum DNL, 0.012 percent of full scale
Settling14 us to plus or minus 0.5 LSB, a 71.4 kHz ceiling
InterfaceThree-wire cascadable, 500 kHz update rate, Schmitt trigger clock input
Supply4.5 V to 5.5 V for this part, 2.7 V to 5.5 V for the L version
Supply current1000 uA typical at 5 V, 5 mW, 8.76 Ah over a year
Power-on resetBoth outputs cleared to 0 V, which matters in a loop that must start closed
Output stageRail-to-rail amplifier, no external buffer or reference
Package8-lead SOIC, 8-lead PDIP, minus 40 to 85 C on the I grade

One milliamp is 8.76 Ah a year, which is not free in a battery product

An always-on converter at 1 mA costs 8.76 Ah over a year, so a 2000 mAh cell would be flat in under three months before the rest of the board draws anything. This part has no shutdown pin and no sleep mode, which is the trade for the 8-lead package: the LTC1446 is a converter for a mains powered instrument or for a product where the rail is switched, not for a sensor node that sleeps. A board that needs a micropower dual DAC with a sleep state is looking at the LTC1661 class instead, at 60 uA per converter and 1 uA in sleep, with 10 bits rather than 12.

The cascadable interface is the feature that gets used in multi-channel equipment. Several converters can share one clock and one data line with separate load lines, so eight setpoints cost eight chip selects and no extra serial port. The Schmitt trigger on the input is what allows the clock to arrive through an optocoupler with a slow, rounded edge, which is common in equipment that has to isolate a control interface from a noisy power stage.

Two questions buyers ask

Can it drive a 4 to 20 mA loop directly?
No. The output is a voltage amplifier rated for a light load, and a loop needs a current source with a compliance range of several volts. The usual arrangement is this converter into a voltage to current stage, and that stage has to be able to sink or source the full 20 mA at the lowest loop supply the installation allows.

Is the L version a drop-in replacement?
Mechanically yes, electrically it changes the scale. The LTC1446L reaches 2.5 V full scale rather than 4.095 V, so 1 LSB falls to 0.61 mV and every downstream gain has to rise by a factor of 1.64 to keep the same output range. A board that swaps the part without changing the gain loses 36 percent of its span and the top 36 percent of its codes never produce the current they used to.

Ordering and supply

The IS8 suffix is the 8-lead SOIC on the industrial temperature grade, and the TRPBF suffix is tape and reel, lead free. Substitution traps in this class are the full scale voltage, the presence of the internal reference, and whether the part has a power-on reset to zero. A converter that powers up at mid scale instead of zero will drive a loop or a bias stage to half range on every power cycle, which is a fault that shows up only in the field.

We hold and source this family for production and for repair lots. Start at the analog mixed signal ICs family page, compare a candidate against the ADC and DAC cross reference, and where a converter has to go into a board that is already built, the order in how to verify a drop in replacement puts the full scale and the power-on state ahead of the socket check.

Request Quote — In Stock, 100% New & Original, Full Warranty