LT8641HUDC#TRPBF
Product Specifications
LT8641HUDC#TRPBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LT8641HUDC#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
LT8641HUDC#TRPBF: 65 V input, 3.5 A output Silent Switcher, 150 C grade
The LT8641HUDC#TRPBF is a monolithic synchronous step-down regulator that takes 3 V to 65 V in and delivers 3.5 A continuous, 5 A peak transient, from an 18-lead 3 mm by 4 mm QFN on tape and reel. The H grade in this code is the wide temperature option, minus 40 C to 150 C, part marking LGSN. Three features define the part: Silent Switcher construction with spread spectrum modulation for low emissions, 2.5 uA of quiescent current while regulating, and a 35 ns minimum switch on-time that allows a high input to low output conversion at high frequency without pulse skipping.
Published values
| Parameter | Value |
|---|---|
| Input voltage | 3 V to 65 V |
| Output current | 3.5 A continuous, 5 A peak transient |
| Quiescent current | 2.5 uA while regulating 12 V to 3.3 V in Burst Mode |
| Output ripple | Below 10 mV peak to peak at any load |
| Minimum switch on-time | 35 ns |
| Switching frequency | 200 kHz to 3 MHz, adjustable and synchronisable |
| Dropout | 130 mV at 1 A |
| Efficiency | Up to 95 percent at 1 MHz, 12 V to 5 V; up to 94 percent at 2 MHz |
| Modes | Burst Mode, pulse skipping, spread spectrum, external sync |
| Overload behaviour | Safe with a saturated inductor |
| Package | 18-lead 3 mm by 4 mm QFN, part marking LGSN |
| Grade | H, minus 40 C to 150 C, AEC-Q100 qualified family |
What Silent Switcher changes for a 65 V rail
A switching node that swings 65 V produces a large electric field, and the usual answer is shielding, snubbers and a filter that costs board area. Silent Switcher construction splits the current loop into two opposing paths inside the package so the magnetic field largely cancels, and the spread spectrum option dithers the switching frequency so the emissions that remain are spread rather than concentrated at one harmonic. For equipment that has to pass a conducted or radiated emissions limit with a 48 V input, this is the difference between a two layer board with a filter and a four layer board with a shield. The datasheet makes no claim that the part removes the need for input filtering; it claims the emissions are low enough that the filter can be small.
The 2.5 uA quiescent current in context
A regulator that holds 3.3 V from 12 V while drawing 2.5 uA is drawing less than the self discharge of most battery packs, which is what makes this part usable in equipment that sits idle for months and has to wake on an event. That figure applies in Burst Mode with the output in full regulation, not in a shutdown state, so the rail is genuinely live. The trade is ripple and frequency content: Burst Mode groups switching pulses and lets the output wander within a small window, while pulse skipping and forced continuous modes give a cleaner spectrum at a higher quiescent current. The SYNC/MODE pin selects between them, and a program that switches modes between active and standby is using the part as intended.
High input to low output at high frequency
The 35 ns minimum on-time is the number that makes a 48 V to 3.3 V conversion possible at 2 MHz. Without a short minimum on-time the part would have to skip pulses at that ratio, which puts the switching frequency into the audio band and produces output ripple at an unpredictable rate. The datasheet also states that the part tolerates a saturated inductor in overload, which matters because a fast transient into a short can saturate the inductor before the current limit responds. Neither feature is a substitute for a correct inductor choice, but together they widen the range of faults the part survives.
Thermal and grade decisions
The H grade reaches 150 C at the junction, which is 25 C more than the E and I codes on the same die, and the automotive variants add a J grade at the same 150 C with a controlled process. Efficiency of 94 to 95 percent at the nominal operating point means that a 3.5 A, 5 V output dissipates about 0.9 W to 1 W inside the package, and the QFN pad is the only heat path. The grade and body options are tabulated on the power management cross reference, the cost of a grade step is worked through on the component cost page, and the second source position for ADI switching parts is described on ADI part second source.