Contact Us

LT3690EUFE#TRPBF

Brand: Analog Devices
Analog Devices LT3690EUFE#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3690EUFE#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT3690EUFE#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3690EUFE#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3690EUFE: the same 36 V, 4 A regulator with the E grade guarantee

The LT3690EUFE is the E grade of the 36 V, 4 A synchronous step-down regulator in a 26-lead 4 mm by 6 mm QFN. It shares the whole electrical core with the other grades: 3.9 V to 36 V input, overvoltage lockout through 60 V transients, a 30 milliohm synchronous switch, an internal boost diode, a 0.8 V reference, a 170 kHz to 1.5 MHz oscillator, soft start with tracking, a power good flag at 90 percent of the set output and 70 microamps of quiescent current in Burst Mode. The order table gives it the same minus 40 to 125 degree junction range as the I grade, which is the point most buyers get wrong.

Published values

ParameterValue
Input voltage3.9 V to 36 V, overvoltage lockout through 60 V transients
Output current4 A maximum
Output voltage0.8 V to 20 V set by the feedback divider
Feedback reference0.8 V
Synchronous switch30 milliohm N-channel
Boost diodeinternal, no external catch diode needed
Quiescent current70 microamps at 12 V in, 3.3 V out, Burst Mode
Switching frequency170 kHz to 1.5 MHz, programmable and synchronizable
Package26-lead, 4 mm by 6 mm QFN with exposed pads
Temperature gradeE, junction from minus 40 to 125 degrees
Order codeLT3690EUFE#TRPBF, tape and reel

E and I share a temperature range, and that is not a typo

The order table lists the E and the I grade over the same minus 40 to 125 degrees junction range. They are not two different temperature classes, and buying the I grade to get a wider range is paying for something the table does not offer. What separates them is how the limits are guaranteed: the E grade is tested at 25 degrees with the rest assured by characterisation, and the I grade is guaranteed over the full range.

That distinction only matters when the product has to prove compliance over temperature rather than work over temperature. A consumer or an industrial product that is validated as a system can use the E grade; a product whose qualification report quotes the regulator's limits at the extremes needs the I grade, or needs its own margin. Both are honest positions, and choosing between them is a documentation question rather than an electrical one.

Four amps with an internal boost diode

The internal boost diode removes the external catch diode that a nonsynchronous regulator needs, which saves a component, a placement and a parasitic. It also means the switch node has only the inductor and the internal switches attached, which is what makes the 4 mm by 6 mm footprint possible at 4 A.

The trade is that the diode drop is inside the package: 820 to 950 millivolts at 200 mA of boost current is dissipated where the die can feel it. At low duty cycles, which is to say at high input voltage and low output voltage, that loss is a larger share of the total, and the efficiency curve at 36 V in and 3.3 V out is lower than at 12 V in for that reason rather than because of the switch.

Choosing the frequency and the inductor together

The oscillator runs from 170 kHz to 1.5 MHz and can be synchronised to an external clock, which is worth having when several rails share a board and the beat between them lands in a measurement band. Higher frequency means a smaller inductor and a smaller output capacitor, and it means more switching loss and a shorter minimum on time.

At 12 V to 3.3 V and 500 kHz, a 3.9 microhenry inductor gives 1.2 A of ripple, which is 30 percent of the 4 A load and leaves the peak at 4.6 A against a 5.5 A minimum current limit. At 1 MHz the same ripple needs about 2 microhenry. Both work; the 500 kHz version has lower switching loss and needs more board area, and the choice is usually made by the height limit on the inductor rather than by the efficiency.

Two pages worth reading before a purchase order goes out are the power management cross reference and the ADI second source page; the first lists what else fits the socket, the second is the test sequence for a drop in, and the obsolete part cross reference hub covers the case where the shortage is already on the line.

Two questions buyers ask

Does the E grade cover minus 40 to 125 degrees like the I grade? The order table gives both the same range. The difference is that the I grade is guaranteed over the full range while the E grade is tested at 25 degrees with the rest assured by characterisation, so the E grade is the right choice only when the temperature limits do not have to be quoted in a qualification report.

Is an external catch diode needed? No. The boost diode is internal, which is part of how a 4 A regulator fits in a 4 mm by 6 mm package. Its forward drop is inside the package and shows up in the efficiency at high input voltage and low duty cycle.