LT3092ITS8#TRMPBF
Product Specifications
LT3092ITS8#TRMPBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LT3092ITS8#TRMPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
LT3092ITS8#TRMPBF: the 500 unit reel of the SOT-23 current source
LT3092ITS8#TRMPBF is the same 8-lead SOT-23 current source as the standard reel part, packed as a 500 unit reel rather than the full reel quantity. The device itself does not change: a 10 uA SET pin reference with 1 percent initial accuracy, 1.2 V to 40 V input, 0.5 mA to 200 mA output set by two resistors, better than 10 ppm per volt of current regulation, no requirement for input or output capacitors, and reverse voltage plus reverse current protection. The suffix only changes how many pieces arrive on the reel and which channel stocks them.
Published values
| Parameter | Value |
|---|---|
| Input voltage range | 1.2 V to 40 V |
| Output current | 0.5 mA to 200 mA |
| SET pin current | 10 uA, 1 percent initial accuracy |
| Current regulation | better than 10 ppm per volt |
| Line regulation | 0.001 percent per volt typical |
| Capacitors | none required at input or output |
| Protection | reverse voltage, reverse current, current limit, thermal shutdown |
| Package | 8-lead SOT-23 |
| Temperature range | -40 C to 125 C |
| Packing | 500 unit reel, TRMPBF suffix |
What the TRM suffix means on a purchase order
Linear and ADI part numbers carry the packing in the suffix, and the packing is a real line item rather than a detail. TR is a full tape and reel, TRMPBF is a 500 unit reel offered to support prototyping and small builds, and PBF marks lead free finish. A planning system that treats TRMPBF as an interchangeable code with TR will over order by whatever the full reel quantity is, and a broker quote that lists TRMPBF against a demand for 20,000 pieces is usually a sign the quote was built from a distributor catalogue rather than from stock. For a build of a few hundred boards the 500 unit reel is the correct buy, and it also removes the cut tape handling step at the line.
Why a current source shows up in small builds
The device appears in sensor excitation, remote supply over a pair, in-line limiting and intrinsic safety circuits, and those circuits are typically built in modest quantities with long life. A 500 unit reel covers a production run plus spares without holding a full reel of a part that may sit for two years. The other reason small builds specify it is that the current is set by two resistors, so one stocked device covers several variants of the same instrument, and the variant is decided at the resistor placement rather than at the component order.
Accuracy the two resistors decide
The output current follows 10 uA times RSET over ROUT. The device contributes 1 percent at the SET pin, and the resistors contribute their own tolerance and their temperature coefficients. In a build where the current must hold over temperature, the resistor pair is the dominant term: a 0.1 percent pair with 25 ppm per degree tracks far better than a 1 percent pair, and neither changes the device. Buyers who receive a complaint about current drift should look at the resistor pair before the regulator.
Compliance and headroom
The part regulates once it has 1.2 V across it, and that figure is the compliance floor for the loop. Below it the device behaves as a resistor and the current falls. At the top of the input range the constraint moves to dissipation, so the same 200 mA is comfortable at 2 V across the part and not comfortable at 20 V. A specification that states only the current is incomplete for this device, which is why the data sheet couples the 200 mA figure with the 40 V input range and leaves the thermal judgement to the user.
Ordering and stock
For a line that already runs the SOT-23 body, the reel size is the only decision. The DFN and SOT-223 bodies of the same device exist for thermal reasons, not for electrical ones, so moving body for stock reasons is safe only if the board copper is changed with it. Our power management cross reference lists the bodies against the same device, the one stop BOM sourcing page covers mixed quantity buying, and the lead time page shows current schedules for the small reel code.