LT3091IDE#PBF
Product Specifications
LT3091IDE#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LT3091IDE#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
LT3091IDE#PBF: tray packing for the same 1.5 A negative regulator
LT3091IDE#PBF is the lead free 14-lead 4 mm by 3 mm DFN version of the 1.5 A negative regulator, industrial grade, supplied in trays rather than on tape and reel. The electrical content is identical to the reeled code: 1.5 V to 36 V input, 0 V to 32 V output, 300 mV typical dropout, 18 uV RMS noise, a 50 uA SET pin at 1 percent and a programmable current limit with a current monitor. The PBF suffix marks the lead free finish; the absence of TR marks the packing.
Published values
| Parameter | Value |
|---|---|
| Input voltage | 1.5 V to 36 V |
| Output voltage | 0 V to 32 V |
| Output current | 1.5 A |
| Dropout voltage | 300 mV typical |
| Output noise | 18 uV RMS, 10 Hz to 100 kHz |
| SET pin current | 50 uA, 1 percent |
| Quiescent current | 1.2 mA, below 1 uA shutdown |
| Output capacitor | 10 uF minimum |
| Package | 14-lead 4 mm by 3 mm DFN |
| Packing | tray, lead free finish |
| Temperature range | -40 C to 125 C |
Tray against reel on a real line
A tray code and a reel code hold the same die, and the difference shows up in handling. Reels feed pick and place machines directly, so a line running more than a few hundred boards usually wants TR. Trays are used for short runs, for hand placement, for engineering samples and for board assembly houses whose feeder setup is already committed to another part number. A buyer who orders the tray code for a full production run pays for an extra de tray and re reel step, and sometimes pays for it twice when the tray cannot be loaded without a baking step. Because both codes are the same device, the choice is operational and should be made from the line's feeder configuration, not from the price column alone.
Lead free finish and what PBF covers
PBF marks the lead free finish and the lead free assembly compatibility. On this part the finish is the exposed pad and the leads on the TSSOP version, so the reflow profile has to match the paste the assembly house uses. Mixing a PBF part with a leaded paste is a process decision that belongs to the assembly house and not to the buyer, but a mixed bill of materials on one board is worth flagging at the quote stage because it usually means one of the codes is a legacy line.
Programmable limit in a fixture build
The programmable current limit is what makes this part useful in test fixtures and in bench supplies. A fixture that powers a board under test can be set to the current the board is allowed to draw, and the monitor output gives the operator a current reading without a shunt. In a small build that is exactly the kind of line that gets trays, since the fixture is assembled by hand and the quantity is low. Buyers who later move the same board into series production usually move to the reel code and keep the tray code for spares and repairs.
Availability and substitution
The tray code can be harder to find in distribution than the reel code, because distribution carries the volume packing. When the tray is out, the reel is the same part and can be used if the line can accept a reel, which is a conversation with the assembly house rather than with the supplier. Grade determines the temperature window, so an H code cannot be replaced by a tray of I parts without a thermal review. Our power management cross reference lists the packing and grade of each code, the shortage recovery page covers the options when only one packing is available, and the lead time page shows schedules for both.