Contact Us

LT3090EDD#PBF

Brand: Analog Devices
Analog Devices LT3090EDD#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3090EDD#PBF — Analog & Mixed-Signal ICs | Superb Automation

LT3090EDD#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3090EDD#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3090EDD#PBF: the floating three terminal configuration in tray form

The LT3090EDD#PBF is the extended grade of the 600 mA negative regulator in the 10-lead 3 mm DFN, supplied in trays. The part is unusual among negative regulators in that it can be wired as a three terminal floating regulator, with the SET resistor returned to the output rather than to ground, and in that form it regulates the voltage across itself instead of a voltage relative to ground. Options like that are usually explored on a bench before a reel is ordered, which is why this tray code exists alongside the taped version.

Published values

ParameterValue
Input voltage-1.5 V to -36 V
Output voltage0 V to -32 V, or floating across the load
Output current600 mA
SET pin current50 uA with 1 percent initial accuracy
Dropout voltage300 mV typical at 600 mA
Reference current noise10 nA RMS, 10 Hz to 100 kHz
Output noise18 uV RMS, 10 Hz to 100 kHz
Shutdown current4.5 uA typical
Thermal resistance33 C/W junction to ambient, 8 C/W to case
Package and grade10-lead DFN, tray, -40 C to 125 C

When floating makes sense

A rail that has to sit at an arbitrary offset, for example the negative supply of a high side current sense amplifier or a floating bridge driver, cannot be built from a ground referenced regulator without an extra reference. In the floating arrangement the SET resistor connects from the SET pin to the output, the load sits between the output and the return, and the regulator holds a fixed voltage across the load regardless of where that load sits in the stack. The current limit and the monitor pins still work, so the protection and the telemetry survive the change of configuration.

Why a buyer cares about the pin count

The 10-lead body exposes SET, ILIM, the two monitor pins, shutdown and the compensation pin, which is the full function set of the part. The MSOP has the same functions with two more leads, and the two bodies are interchangeable apart from the pad connection. For a procurement team the relevant point is that one part number covers a plain negative rail, a parallel pair for 1.2 A, and a floating supply, so a family with several of those needs does not have to carry three different regulators. That reduces the number of line items and, more importantly, the number of last time buys when a product is discontinued.

The failure mode worth knowing about

In the floating configuration the SET resistor is the only thing that defines the output, so an open resistor makes the regulator try to drive its output until something limits. The internal current limit and the ILIM resistor are what stop that from becoming damage, and both should be sized with the open resistor case in mind. This is the sort of detail that is easy to miss when a circuit is copied from a divider-based positive regulator, and it is worth a review on any negative rail that uses the floating form.

Order code and stock

The PBF suffix in this code is the tray; EDD#TRPBF is the same part on tape and reel. For a first article or a lab build the tray is the practical form, and the reel follows once the configuration is fixed. The BOM shortage recovery page covers moving between the tray and reel codes without a part change, the ADI second source page lists the grade options, and the cost page covers volume breaks across the negative family.