Contact Us

LT3085EDCB#TRPBF

Brand: Analog Devices
Analog Devices LT3085EDCB#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3085EDCB#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT3085EDCB#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3085EDCB#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3085EDCB#TRPBF: 500 mA in a 2 mm by 3 mm six lead DFN

The LT3085EDCB#TRPBF is the extended grade of the 500 mA regulator in a 6-lead 2 mm by 3 mm DFN, on tape and reel and rated -40 C to 125 C. It is the smallest body in the family and it carries the same core: 1.2 V to 36 V input, output from 0 V to 36 V set by a 10 uA SET current, 275 mV of dropout in two supply operation, 90 dB of rejection at 120 Hz and a minimum load requirement of 300 uA typical.

Published values

ParameterValue
Input voltage1.2 V to 36 V
Output voltage0 V to 36 V, one resistor on SET
Output current500 mA
SET pin current10 uA
Dropout voltage275 mV in two supply operation
Minimum load current300 uA typical
Ripple rejection90 dB at 120 Hz
Output noise40 uV RMS, 10 Hz to 100 kHz
Thermal resistance68 C/W on 2500 square millimetres, 78 C/W at 100 square millimetres
Package6-lead, 2 mm by 3 mm DFN, exposed pad is OUT
Grade-40 C to 125 C, tape and reel

Two millimetres of body, six leads

Six leads carry two output pins, two input pins, the SET pin and the control pin, with the exposed pad tied to the output. That is the whole regulator, and the pin count is why the body is small: there is no shutdown lead and no spare pin on this part, so a system that needs to switch the rail has to do it upstream. For a dense analog board with several low current rails in a small area, the 2 by 3 mm footprint and the absence of a shutdown lead is usually an acceptable trade, because the rail is switched by the converter that feeds it.

The heat has to leave through the pad

With 68 C/W on 2500 square millimetres and 78 C/W on 100 square millimetres, this body is the least thermally capable in the family, so the dissipation budget is tighter. At 500 mA with a 1 V differential the part dissipates 0.5 W plus the control path, which is about 35 C of rise on a generous shape and 40 C on a small one. In a 70 C cabinet that is a junction near 110 C, which is inside the 125 C limit but close enough that a second rail beside it will push it over. The 8-lead MSOP with its 55 C/W figure is the safer choice when the current is continuous and the enclosure is sealed.

Where the small body is the right answer

The applications that suit this part are the ones where the regulator is not the heat source: a post regulator after a switching converter with only 200 mV to drop at 200 mA, a bias rail for an amplifier, a reference supply that draws 20 mA. At 200 mV and 200 mA the dissipation is 40 mW and the thermal question disappears. The same part in a 500 mA continuous load with a volt across it is the case where the small body is the wrong answer, and the data sheet tables make that comparison easy to do before the board is ordered.

Order code and stock

EDCB is the extended grade in tape and reel, IDCB the industrial grade of the same 6-lead body, and the MSOP codes EMS8E and IMS8E are the larger alternative with the same electrical table. Because the pin functions are the same apart from the extra lead, a change of body is a footprint change and not a circuit change. The power management cross reference maps the two bodies, vendor consolidation covers keeping both on one order, and the cost page shows the volume difference between the pack forms.