Contact Us

LT3071IUFD#PBF

Brand: Analog Devices
Analog Devices LT3071IUFD#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3071IUFD#PBF — Analog & Mixed-Signal ICs | Superb Automation

LT3071IUFD#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3071IUFD#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3071IUFD#PBF: the tray code of the 5 A margining regulator

LT3071IUFD#PBF is the industrial grade of the 5 A low dropout regulator in the 28-lead 4 mm by 5 mm QFN, supplied in trays with a lead free finish. The device is the same as the reeled code: output digitally selectable from 0.8 V to 1.8 V in 50 mV steps, analog margining over plus or minus 10 percent, 85 mV typical dropout at 5 A, 25 uV RMS noise with a 0.01 uF reference bypass, 30 dB rejection at 1 MHz, 1 percent accuracy over line, load and temperature, and a current monitor at one 2500th of the load current. Stability needs 15 uF of low ESR ceramic on the output.

Published values

ParameterValue
Output current5 A, parallelable
Output voltage0.8 V to 1.8 V, 50 mV steps
Margining rangeplus or minus 10 percent
Dropout voltage85 mV typical
Output noise25 uV RMS, 10 Hz to 100 kHz
Current monitoroutput current divided by 2500
Accuracy1 percent over line, load and temperature
Output capacitor15 uF low ESR ceramic minimum
Package28-lead 4 mm by 5 mm QFN
Packingtray, lead free finish
Temperature range-40 C to 125 C

When a tray code is the right buy

Tray packing suits development boards, evaluation fixtures and small production runs where the pick and place line is set up for another part number, or where the board is assembled by hand. The device is a 28-lead QFN with an exposed pad, so hand assembly is not comfortable, but rework and prototype builds still use trays. For series production the reel is the correct order, and the tray code stays in the file for spares and for the test fixture that validates the rail. Because both codes carry the same die and the same table, moving between them is a handling decision rather than a technical one.

Margining in production test

The margining input is what makes this part useful beyond the rail itself. A test station can sweep the core voltage plus or minus 10 percent while the processor is running a pattern, and the failures that appear at the edges are the ones that would appear later in the field. Doing the same sweep with a programmable supply means a relay matrix and a second power path, which is more hardware and more calibration. Buyers building a test fixture should specify the margining pin and its control signal in the fixture documentation, because the pin is easy to leave floating and the rail then runs at the nominal setting only.

Current reporting without a shunt

The monitor output carries one 2500th of the load current, so a 2.5 kohm resistor gives a convenient scale and a controller can read the rail current without a shunt in the power path. In a rack product that reports per slot power, this is the cheapest way to get the number. The same signal is useful for a foldback or a derating scheme, since the controller can reduce a load before the regulator's own limit engages.

Thermal path in the QFN

At 5 A and 85 mV of dropout the regulator dissipates under half a watt, so the package is not usually the limit. The limit appears when the intermediate bus has more margin than intended, for example a 1.8 V bus feeding a 0.9 V core, where 4.5 W lands in the QFN and the exposed pad has to carry it into the board. That is the case the tracking pin exists to prevent. A buyer should confirm the upstream converter accepts the tracking control before committing to the rail.

Ordering notes

IUFD is the industrial grade QFN; the E grade shares the temperature window and the MP grade covers -55 C to 125 C. The tray code is PBF without TR, and the reel code is TRPBF. Our power management cross reference lists both packings against the grades, the shortage recovery page covers the options when only one packing is available, and the one stop BOM sourcing page explains how the rail is grouped with the upstream converter on one order.