Contact Us

LT3060ITS8-3.3#TRPBF

Brand: Analog Devices
Analog Devices LT3060ITS8-3.3#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3060ITS8-3.3#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT3060ITS8-3.3#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3060ITS8-3.3#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3060ITS8-3.3#TRPBF: 3.3 V industrial grade regulator from a 45 V rail

The LT3060ITS8-3.3#TRPBF is the 3.3 V fixed LT3060 in the 8-lead ThinSOT, tape and reel, I grade, guaranteed from minus 40 C to 125 C at the junction. It accepts 1.6 V to 45 V, delivers 100 mA, and holds the output between 3.234 V and 3.366 V across line, load and temperature. With 40 uA of quiescent current and a 2.2 uF ceramic output capacitor as the minimum, it is the smallest complete solution in this family for a 3.3 V rail that has to stay quiet and stay alive on a standby branch.

Published values

ParameterValue
Input voltage1.6 V to 45 V, 50 V absolute maximum
Output voltage3.3 V fixed, 3.234 V to 3.366 V over temperature
Line regulation1.3 mV typical, 7 mV maximum, 3.85 V to 45 V input
Load regulation3.1 mV typical, 24 mV maximum, 1 mA to 100 mA
Output current100 mA, foldback current limit
Dropout voltage300 mV typical at 100 mA
Quiescent current40 uA typical, 80 uA maximum at no load
Output noise30 uV RMS with 10 nF on REF/BYP
Package8-lead ThinSOT, part marking LTFWG
Thermal resistance57 C/W to 67 C/W junction to ambient, 25 C/W to case
GradeI, minus 40 C to 125 C

What 3.3 V from 45 V costs in heat

The input ceiling is the reason this part exists and also the reason it is often misapplied. A 45 V bus is usually a 48 V telecom or a 36 V battery system, and the nominal case is nearer 24 V or 12 V. At 12 V in and 3.3 V out the part drops 8.7 V at 100 mA, which is 0.87 W. At 24 V it is 2.07 W and at 36 V it is 3.27 W. In the ThinSOT body with 57 C/W and full copper, 0.87 W is a 50 C rise, 2.07 W is 118 C of rise, and 3.27 W is 186 C. The vendor limits the output current range at high differential through current limit foldback and says so in the electrical table notes, which protects the part but does not turn it into a 24 V to 3.3 V converter at 100 mA. For that duty the switching stage comes first and the regulator runs from its output.

Noise behaviour on a fixed 3.3 V rail

The 30 uV RMS figure is measured with a 10 nF capacitor on REF/BYP and a 10 uF output capacitor. The same capacitor sets the soft start ramp, and in shutdown it is discharged so the next enable starts from zero. Because this is a fixed voltage code, there is no external divider to multiply the reference noise, so the noise is set by the internal gain from the 600 mV reference to 3.3 V plus whatever the bypass capacitor and the output capacitor pass. A front end that needs less than that is looking at a reference plus a filter rather than a different regulator code, since every member of the family shares the same noise floor.

Load regulation and the ThinSOT caveat

The 3.1 mV typical load regulation figure belongs to the DFN body, where it is guaranteed. On the ThinSOT fixed voltage codes the load regulation specification cannot be guaranteed because of production test limits, and those parts are tested the same way as the adjustable version with ADJ tied to OUT. The same note applies to dropout at high current. For most 3.3 V logic loads an unguaranteed 24 mV window is irrelevant, but a program that quotes a regulation budget in a qualification report should use the DFN code, which is LT3060EDC-3.3 or LT3060IDC-3.3 depending on grade.

Sourcing and substitution

Three grades and two bodies share this 3.3 V output, so a shortage can usually be met without touching the circuit if the temperature claim and the footprint are negotiable. The grade and body matrix is on the power management cross reference. The cost effect of moving from I to E grade, or from ThinSOT to DFN, is worked through on the component cost page, and a multi rail file that wants one supplier for the whole power tree is described on one stop BOM sourcing.