Contact Us

LT3060HTS8-3.3#TRPBF

Brand: Analog Devices
Analog Devices LT3060HTS8-3.3#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3060HTS8-3.3#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT3060HTS8-3.3#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3060HTS8-3.3#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3060HTS8-3.3#TRPBF: 3.3 V, 100 mA, 150 C junction regulator in ThinSOT

The LT3060HTS8-3.3#TRPBF is the 3.3 V fixed LT3060 in the 8-lead ThinSOT, tape and reel, H grade, guaranteed from minus 40 C to 150 C at the junction. It takes 1.6 V to 45 V in, delivers 100 mA at 300 mV of typical dropout, and holds the regulated window at 3.218 V to 3.366 V over the full H grade temperature range. It is the code for a 3.3 V rail in an enclosure that runs hot: a sealed box with a switching stage inside, a cabinet in direct sun, or a board stacked above a power supply.

Published values

ParameterValue
Input voltage1.6 V to 45 V, 50 V absolute maximum
Output voltage3.3 V fixed, 3.218 V to 3.366 V over temperature, H grade
Line regulation1.3 mV typical, 19 mV maximum, H grade
Load regulation3.1 mV typical, 49 mV maximum, H grade
Output current100 mA, foldback current limit
Dropout voltage300 mV typical at 100 mA
Quiescent current40 uA typical, 80 uA maximum at no load
Output noise30 uV RMS with 10 nF on REF/BYP
Package8-lead ThinSOT, part marking LTFWG
Thermal resistance57 C/W to 67 C/W junction to ambient, 25 C/W to case
Maximum junction150 C
GradeH, minus 40 C to 150 C

Reading the widened tolerance correctly

The 3.3 V window on the H grade opens to 3.218 V on the low side and 3.366 V on the high side, against 3.234 V and 3.366 V on the I grade. Line regulation is specified to 19 mV maximum and load regulation to 49 mV maximum, against 7 mV and 24 mV on the I grade. Those numbers are the cost of the 150 C guarantee, and they only matter where the rail is also doing a second job as a reference. On a logic rail feeding 3.3 V CMOS, a 3.218 V floor is still inside the supply window with room to spare. On a rail that feeds an ADC reference input, the 116 mV total spread is the reason to add a reference instead of a tighter grade.

The ThinSOT limits in a hot application

In this body the dropout and load regulation numbers carry the production test caveat: both are guaranteed for the DFN and not for the ThinSOT. That matters more at 150 C than at 25 C, because the quantities being guaranteed drift with temperature. A program that needs a warranted window at high ambient should look at the DFN codes, which carry the guarantee and a 125 C junction limit with the whole table specified there. Deciding between a guaranteed part at 125 C and an unguaranteed one at 150 C is a judgement about which risk the application actually carries, and there is no universal answer.

The heat path at 3.3 V

From 12 V to 3.3 V at 100 mA the part dissipates 0.87 W. At 57 C/W that is a 50 C rise, so a 100 C ambient puts the junction at 150 C exactly, which is the rating and not a margin. From 24 V the dissipation is 2.07 W and the rise is 118 C, which is already past the limit at any realistic ambient. In a hot box the honest options are a lower input rail, a smaller load, or a switching stage in front. The vendor's protection is foldback current limit and a 165 C thermal shutdown, both of which prevent damage and neither of which keeps a hot board in specification.

Grade and body decisions

Three temperatures and two bodies overlap on this output voltage, so a shortage or a cost review can move the part in several directions. The I grade stops at 125 C, the H grade goes to 150 C with a minus 40 C cold end, and the MP grade goes to 150 C with a minus 55 C cold end. The full matrix is on the power management cross reference, and the difference between a drop in and a footprint change when the body moves is on pin to pin cross reference. Holding the whole 3.3 V rail set under one supplier is described on one stop BOM sourcing.