Contact Us

LT1761ES5-SD#TRMPBF

Brand: Analog Devices
Analog Devices LT1761ES5-SD#TRMPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT1761ES5-SD#TRMPBF — Analog & Mixed-Signal ICs | Superb Automation

LT1761ES5-SD#TRMPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT1761ES5-SD#TRMPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LT1761ES5-SD#TRMPBF: A 100 mA Regulator That Holds 20 microamps of Quiescent Current

What this part is

The LT1761 is a micropower low dropout regulator in a five lead TSOT-23, and the SD suffix marks the adjustable member of the family, which sets its output from an external divider against a 1.22 V reference instead of a trimmed internal tap. What makes the part interesting to a buyer is not the 100 mA of output current, which several parts in this size deliver, but the combination of 20 microamps of quiescent current with 20 microvolts RMS of output noise and 300 millivolts of dropout, all in a body of about three millimetres square.

The input range runs from 1.8 V to 20 V, the output capacitor can be as small as 1 microfarad of ceramic with no series resistance required, and the internal protection covers reverse battery, reverse current, current limit and thermal limit. In shutdown the current falls below 0.1 microamp. This is the regulator that sits on a battery rail and stays alive between radio bursts, or the post regulator behind a noisy switching converter where the last 40 dB of supply rejection has to come from somewhere.

Published figures that matter to a buyer

Output current100 mA
Input range1.8 V to 20 V
Dropout300 mV at 100 mA
Quiescent current20 microamps
Shutdown currentbelow 0.1 microamp
Output noise20 microvolts RMS, 10 Hz to 100 kHz, with a 0.01 microfarad bypass capacitor
Fixed outputs1.2 V, 1.5 V, 1.8 V, 2 V, 2.5 V, 2.8 V, 3 V, 3.3 V, 5 V
Adjustable output1.22 V to 20 V, set by an external divider
Output capacitor1 microfarad ceramic, stable without series resistance
Protectionreverse battery, reverse current, current limit, thermal limit
Body5 lead TSOT-23
Reference1.22 V

Where the headline numbers stop

The noise figure belongs to a condition. Twenty microvolts RMS is quoted with an external 0.01 microfarad bypass capacitor fitted, and a board that leaves that capacitor off gets a quieter part than a generic regulator but nowhere near the published number. On the adjustable order code there is no separate bypass pin: the feedback node is where the capacitor goes and where the divider sits, so the divider current, the divider tolerance and the capacitor all interact. The divider should carry at least a hundred times the 20 microamp quiescent current if the reference loading is not to move the output, which puts the divider string in the tens of microamps and makes it part of the standby budget.

Twenty microvolts on a 3.3 V rail is 6.06 ppm, which is 0.40 of a 16 bit count at 50.35 microvolts per count and 0.025 of a 12 bit count. That is a supply clean enough for a 16 bit converter's reference buffer, and it is not clean enough to replace a reference. Dropout of 300 millivolts at 100 mA is 3 ohm, so a 3.3 V output needs 3.6 V at the input, and a lithium cell at 3.45 V under load cannot hold it. Dissipation is the other limit: 12 V in and 3.3 V out at 100 mA is 0.87 W, and 20 V in at the same current is 1.67 W, which a five lead TSOT-23 does not carry. The part is a 20 V input device for transients and for high side rails, not for a permanent 20 V drop.

Quiescent current of 20 microamps is 175 mAh over a year, which is the number to put against a coin cell, and the 0.1 microamp shutdown state is 0.88 mAh over the same period. Those two figures are what decide whether the part is worth its price in a duty cycled product.

Applications where it fits

  • Battery powered instruments and handheld radios where the sleep current sets the shelf life.
  • Post regulation behind a switching converter on a converter or radio board.
  • Frequency synthesizers and VCO rails, where 20 microvolts matters more than 100 mA.
  • Cellular and pager modules, wireless modems and telemetry units.
  • Sensor front ends that need a quiet rail but draw only a few milliamps.

Two questions buyers ask

Is the fixed voltage version a drop in for the adjustable one? Same body and same pin count, but not the same function: the fixed parts have their divider inside and the adjustable part needs two external resistors whose ratio sets the output. A board laid out for the fixed part has no place for those resistors, so a substitution in either direction is a board change and not a stock swap.

What sets the minimum input voltage? The 1.8 V figure is the floor of the input range, not the floor for a given output. For a 3.3 V output the input has to stay above 3.6 V, and for a 5 V output above 5.3 V, because dropout is added to the setpoint. A battery product that runs down to 3.4 V needs a different setpoint or a different part.

Sourcing notes and next step

LT1761ES5-SD#TRMPBF is the adjustable part in the five lead TSOT-23 on a 500 piece reel. The order code carries the grade letter, the body code and the packing, so a quotation that names only LT1761 is not a quotation for this line. Because the part is a Linear Technology order code now catalogued by Analog Devices, both brand labels appear in distribution and incoming inspection should accept either. The analog and mixed signal IC family page lists the regulator line, the power management cross reference page sets out the fields a regulator substitution has to match, and the lead time page covers the case where the reel date code is short.

Request Quote — In Stock, 100% New & Original, Full Warranty