HMC930A-Die
Product Specifications
HMC930A-Die
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The HMC930A-Die from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HMC930A-Die: DC to 40 GHz at 22 dBm, and the obsolete marking on the family document
The HMC930A-Die is a gallium arsenide pHEMT distributed power amplifier chip covering DC to 40 GHz, with 13 dB of gain, 22 dBm at 1 dB compression, 24 dBm saturated and 33.5 dBm of output third order intercept from 10 V at 175 mA. The family document on the vendor site carries an obsolete watermark, so the first question for a buyer is not the compression point but whether the part can still be obtained and what replaces it.
Published values
| Parameter | Value |
|---|---|
| Frequency range | DC to 40 GHz |
| Small signal gain | 13 dB typical, 11.5 dB minimum to 12 GHz, 10 dB minimum from 32 to 40 GHz |
| Gain flatness | 0.5 dB to 12 GHz, 0.3 dB to 32 GHz, 1.0 dB to 40 GHz |
| Output power at 1 dB compression | 23 dBm to 12 GHz, 22 dBm to 32 GHz, 20 dBm to 40 GHz |
| Saturated output power | 25 dBm to 12 GHz, 24 dBm to 32 GHz, 23 dBm to 40 GHz |
| Output third order intercept | 36 dBm to 12 GHz, 33.5 dBm to 32 GHz, 29 dBm to 40 GHz |
| Noise figure | 4.5 dB to 12 GHz, 5 dB to 32 GHz, 7.5 dB to 40 GHz |
| Supply | 10 V at 175 mA |
| Gate bias | VGG at 3.5 V, with VGG1 between -2 V and 0 V to set 175 mA |
| Die size | 2.82 mm x 1.50 mm x 0.1 mm |
| Assembly | two 0.025 mm wire bonds of minimal length, 0.31 mm |
Start from the status, not the data
The family document is marked obsolete, and a specification written against an obsolete die is a specification written against whatever inventory remains. That is not necessarily a reason to stop: a programme with a five year support window can buy a lifetime quantity and hold it, and the die is small enough that the storage is not a problem.
What it does change is the planning. A board that assumes an endless supply of a die with an obsolete marking is one purchase order away from a board revision, and the honest approach is to ask for the last time buy notice and the recommended replacement before the first build rather than after.
The band splits at 12, 32 and 40 GHz
Every parameter on the page moves across the three segments. Gain falls from 13 dB to 10 dB, compression from 23 dBm to 20 dBm, intercept from 36 dBm to 29 dBm and noise figure rises from 4.5 dB to 7.5 dB between 12 GHz and 40 GHz. A link budget written from the headline numbers at 40 GHz is therefore 1.5 dB optimistic on gain, 3 dB optimistic on compression and 7 dB optimistic on intercept.
The reason is physical rather than a vendor limitation: a distributed amplifier's gain per section falls with frequency and the input and output line losses rise, so the compression point tracks the gain. Choosing this part for a 40 GHz application means accepting the top of band figures, and the figures at 40 GHz are still respectable for a 1.75 W amplifier.
Power and the thermal path
10 V at 175 mA is 1.75 W of dc input, which is less than half the dissipation of the larger die in the same family and makes this one easier to cool. At 1 dB compression the output is 22 dBm, about 158 mW, so most of the input power leaves as heat through the backside of a 2.82 mm by 1.50 mm chip.
Because the die is thin and the power is modest, an epoxy attach to a well grounded carrier is usually enough, and the constraint on the assembly is the radio frequency ground rather than the heat. A carrier with a poor ground under the die will show up as gain variation across the band rather than as a temperature rise.
What to compare it with
The natural comparison is with the wider band and higher power dies in the same family. The 22 GHz die gives 28 dBm and 40 dBm intercept with 400 mA, and the 40 GHz die gives 22 dBm and 33.5 dBm with 175 mA. Neither covers the other's band, so the choice is set by the highest frequency the system has to reach rather than by the power.
Sourcing notes for this family: the amplifier cross reference holds the cross references, the obsolete part cross reference hub is the pre substitution check, and defense grade components is what we use when the part on the drawing is not on the shelf.
Two questions buyers ask
Is the HMC930A-Die obsolete? The family document on the vendor site carries an obsolete marking. Availability should be confirmed against current stock and any last time buy notice before a build is committed.
What is the compression point at 40 GHz? 20 dBm at 1 dB compression and 23 dBm saturated, against 23 dBm and 25 dBm at the bottom of the band. The intercept falls from 36 dBm to 29 dBm across the same range.